Petrogenetic modelling of strongly residual metapelitic xenoliths within the southern Platreef,Bushveld Complex,South Africa

Xenoliths of quartz‐absent Fe‐rich aluminous metapelite are common within the platinum group element‐rich mafic/ultramafic magmatic rocks of the Platreef. Relative to well‐characterized protoliths, the xenoliths are strongly depleted in K₂O and H₂O, and have lost a substantial amount of melt (>50 vol.%). Mineral equilibria calculations in the NCKFMASHTO system yield results that are consistent with observations in natural samples. Lower‐grade rocks that lack staurolite constrain peak pressures to ～2.5 kbar in the southern Platreef. Smaller xenoliths and the margins of larger xenoliths comprise micro‐diatexite rich in coarse acicular corundum and spinel, which record evidence for the metastable persistence of lower‐grade hydrous phases and rapid melting consequent on a temperature overstep of several hundred degrees following their incorporation in the mafic/ultramafic magmas. In the cores of larger xenoliths, temperatures increased more slowly enabling progressive metamorphism by continuous prograde equilibration and the loss of H₂O by subsolidus dehydration; the H₂O migrated to xenolith margins where it may have promoted increased melting. According to variations in the original compositional layering, layers became aluminosilicate‐ and/or cordierite‐rich, commonly with spinel but only rarely with corundum. The differing mineralogical and microstructural evolution of the xenoliths depends on heating rates (governed by their size and, therefore, proximity to the Platreef magmas) and the pre‐intrusive metamorphic grade of the protoliths. The presence or absence of certain phases, particularly corundum, is strongly influenced by the degree of metastable retention of lower‐grade hydrates in otherwise identical protolith bulk compositions. The preservation of fine‐scale compositional layering that is inferred to be relict bedding in xenolith cores implies that melt loss by compaction was extremely efficient.     

Decompressional coronas and symplectites in granulites of the Musgrave Complex, central Australia

Abstract In granulite facies metapelitic rocks in the Musgrave Complex, central Australia, reaction between S1 garnet and sillimanite involves the development in S2 of both garnet + cordierite + hercynitic spinel + biotite and hercynitic spinel + cordierite + sillimanite + biotite. The S2 assemblages occur either in coronas and symplectites, mainly around garnet, or, in rocks in which S2 is more strongly developed, as recrystallized assemblages. Ignoring the presence of biotite and ilmenite, the mineral textures can be accounted for qualitatively by a consideration of the model system FeO-MgO-Al₂O₃-SiO₂ (FMAS); the textural relationships accord with decompression accompanying the change from S1 to S2. However, since biotite and ilmenite are involved in the assemblages, the parageneses are better accounted for in terms of equilibria in the expanded model system K₂O-FeO-MgO-Al₂O₃-SiO₂-H₂-TiO₂-Fe₂O₃ (KFMASHTO), i.e. AFM + TiO₂+ Fe₂O₃. The coronas reflect the tectonic unroofing of at least part of the Musgrave Complex from peak S1 conditions of about 8 kbar to S2 conditions of about 4 kbar.     

长沙交警大楼复杂地层基坑护壁的“综合制导”

长沙市交警支队技术综合大楼地质条件复杂,水量丰富,流砂严重,基坑施工相当困难。经采用安全可靠的“综合制导”措施处理,成为地解决了坑壁坍塌等问题,获得了建设方、质监方、设计方的好评,交警大楼竣工后被评为优良工程。     

∼3,850 Ma tonalites in the Nuuk region,Greenland: geochemistry and their reworking within an Eoarchaean gneiss complex

The Eoarchaean (>3,600 Ma) Itsaq Gneiss Complex of southern West Greenland is dominated by polyphase orthogneisses with a complex Archaean tectonothermal history. Some of the orthogneisses have c. 3,850 Ma zircons, and they vary from rare single phase metatonalites to more common complexly banded migmatites. This is due to heterogeneous strain, in situ anatexis and granitic veining superimposed during younger tectonothermal events. In the single-phase tonalites with c. 3,850 Ma zircon, oscillatory-zoned prismatic zircon is all 3,850 Ma old, but shows patchy ancient loss of radiogenic Pb. SHRIMP spot analyses and laser ablation ICP-MS depth profiling show that thin (usually < 10 μm) younger (3,660–3,590 Ma and Neoarchaean) shells of lower Th/U metamorphic zircon are present on these 3,850 Ma zircons. Several samples with this simple zircon population occur on islands near Akilia. In contrast, migmatites usually contain more complex zircon populations, with often more than one generation of igneous zircon present. Additional zircon dating of banded gneisses across the Complex shows that samples with c. 3,850 Ma igneous zircon are not just a phenomenon restricted to Akilia and adjacent islands. For example, migmatites from Itilleq (c. 65 km from Akilia) contain variable amounts of oscillatory-zoned 3,850 Ma and 3,650 Ma zircon, interpreted, respectively, as the rock age and the time of crustal melting under Eoarchaean metamorphism. With only 110–140 ppm Zr in the tonalites and likely magmatic temperatures of >850°C, zircon solubility–melt composition relationships show that they were only one-third saturated in zircon. Any zircon entrained in the precursor magmas would thus have been highly soluble. Combined with the cathodoluminesence imaging, this demonstrates that the c. 3,850 Ma oscillatory zoned zircon crystallised out of the melt and hence gives a magmatic age. Thus the rare well-preserved tonalites and palaeosome in migmatites testify that c. 3,850 Ma quartzo–feldspathic rocks are a widespread (but probably minor) component in the Itsaq Gneiss Complex. C. 3,850 Ma zircon with negative Eu anomalies (showing growth in felsic systems) also occurs as detrital grains in rare c. 3,800 Ma metaquartzites and as inherited grains in some 3,660 Ma granites (sensu stricto). These demonstrate that still more c. 3,850 Ma rocks were present, but were recycled into Eoarchaean sediments and crustally derived granites. The major and trace element characteristics (e.g. LREE enrichment, HREE depletion, low MgO) of the best-preserved c. 3,850 Ma rocks are typical of Archaean TTG suites, and thus argue for crust formation processes involving important contributions from melting of hydrated mafic crust to the earliest Archaean. Five c. 3,850 Ma tonalites were selected as the best preserved on the basis of field criteria and zircon petrology. Four of these samples have overlapping initial ɛ_Nd (3,850 Ma) values from +2.9 to +3.6± 0.5, with the fourth having a slightly lower value of +0.6. These data provide additional evidence for a markedly LREE-depleted early terrestrial mantle reservoir. The role of c. 3,850 Ma crust should be considered in interpreting isotope signatures of the younger (3,800–3,600 Ma) rocks of the Itsaq Gneiss Complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Wavefield continuation datuming using a near surface model

When topography and low velocity zone differences vary greatly, conventional vertical static time shifts will cause wavefield distortion and influence wave equation seismic imaging for seismic data acquired on a complex near surface. In this paper, we propose an approach to datum correction that combines a joint tomography inversion with wavefield continuation to solve the static problem for seismic data on rugged acquisition topography. First, the near surface model is obtained by refracted wave tomography inversion. Second, the wavefield of sources and receivers are continued downward and upward to accomplish datum correction starting from a flat surface and locating the datum above topography. Based on the reciprocal theorem, Huygens＇ and Fresnel principles, the location of sources and receivers, and regarding the recorded data on the surface as a secondary emission, the sources and receivers are upward-continued to the datum above topography respectively. Thus, the datum correction using joint tomography inversion and wavefield continuation with the condition of a complex near surface is accomplished.     

Tilt corrections over complex terrain and their implication for CO<Subscript>2</Subscript> transport

Observational data from sonic anemometers are commonly rotated from sonic to streamline coordinates, a procedure that is called tilt correction. Tilt corrections are often used to post-process air velocity data collected from sonic anemometers to allow objective interpretation of air flow data relative to the Earth. Since streamline coordinates depend on dynamical characteristics of the flow, the tilt correction depends not only on temporal and spatial variations of the flow, but also on local circulations. We found that ensemble- averaged slope flows are approximately parallel to the terrain slope close to the ground within the canopy layer, but not above, due to the influence of the diurnal variation of local vertical circulations. As a result, the diurnal variation of the observed vertical velocity in streamline coordinates at 21.5 m above the ground over 11-m tall forest canopies can be opposite to that calculated from the continuity equation. To estimate CO₂ transport over sloping terrain, a workable reference coordinate system is needed such that multiple sonic anemometers have a common reference relative to the Earth. Streamline coordinate systems can be the choice of the common reference coordinate system only if flow, at least ensemble-averaged flow, is parallel to terrain slopes. The choice of the reference coordinate system and its implication in investigation of CO₂ transport are discussed. The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

非洲"铜带"铜钴工业地域综合体初步研究

非洲“铜带”是世界上最大的铜钴工业综合体之一。通过实地调查和资料分析,揭示了“铜带”铜钴工业的地域组合特征及空间布局的内在联系规律;剖析了“铜带”铜钴工业地域综合体形成的主要地理条件,尤其是制约冶金工业生产布局的矿物资源、电力和交通运输条件;探讨了主导工业部门在工业地域综合形体形成和区域经济社会发展过程中“联动”和“极化”作用。这对我国在矿山开发过程澡,充分发挥矿业的主导作用带动区域经济社会发展,     

自然灾害复杂性研究

从自然灾害系统的观点出发,阐述了自然灾害系统的特点,提出了自然灾害复杂性的概念。基于前人研究的一些成果,讨论了分形,混沌,人工神经网络等非线性理论以及定性与定量综合集成技术在自然灾复杂性研究中的应用。     

Proximity and complexity in the emergence of high technology industry: The oxbridge comparison

This paper examines similarities and differences in the emergence of high-tech enterprise and the growth of associated industry in Cambridgeshire and Oxfordshire since the 1960s. These cases are viewed as instances of a generic phenomenon: the emergence and growth of the science-based ‘innovative milieu’. A conceptual scheme drawn from complexity studies is used to introduce explanatory coherence into the apparently scattered and disconnected factors relevant to the genesis of high-tech milieux.     

An interpretation of the structure of the Blatherskite Nappe,Alice springs,Northern Territory

The basal unit of the Amadeus Basin sequence is the Heavitree Quartzite, and this formation usually forms a single east‐west ridge along the northern side of the MacDonnell Ranges. However, at Alice Springs there are two such ridges. Basement rocks crop out on the northern side of each ridge, and dolomite and shale of the Bitter Springs Formation crop out on their southern sides. The northern outcrop of dolomite and shale is tightly folded, and is separated from the southern outcrop of basement by a major fault. The bedding of the sediments, the axial plane of the fold, and the fault all dip south at about 45°. Inverted facings on parasitic folds indicate that the northern outcrop of quartzite and dolomite plus shale is an antiform in inverted rocks. Hence the southern outcrop of basement and quartzite is synformal, and is interpreted as the frontal part of a fold nappe. The nappe started as a recumbent anticline whose middle limb of quartzite sheared out as the anticline travelled several kilometres southwards relative to the dolomite and shale below, which formed a tight recumbent syncline. Later monoclinal uplift of the northern half of the area tilted the nappe into its present south‐dipping attitude, thus converting the recumbent anticline into a synform and the recumbent syncline into an antiform.