Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.     

近海工程环境应用中各种风资料的平均时间分析

本文从近海工程设计应用的需要出发，对于通常使用的不同来源的测风资料平均时间进行了分析，这些资料来源包括：岸边及近海探查与生产设施上的气象台站、天气观测船、浮标、商船气象报、从受灾情况估计出的极大风速以及动力诊断模型估计出的海面风速。     

耿贝尔逻辑模型在极值风速和有效波高联合概率分布中的应用

首先介绍了耿贝尔逻辑模型，采用该模型对南海海域的涠州岛海洋站的风速和有效波高实测数据进行了分析，结果表明耿贝尔逻辑模型较好地描述了年极值风速和有效波高两随机变量的联合分布；采用得到的极值风浪联合概率分布推算了不同重现期的极值风速和波高，表明考虑风速和波高相关性对设计荷载的确定有显著影响。由于耿贝尔逻辑模型具有函数结构简单，参数估计方便，因此有望成为极值风速和波高联合分布的较理想概率模型。     

天然气水合物成矿的沉积控制因素

天然气水合物是一种非常规的天然气矿藏，其形成与分布除了需要特定的温压条件外，还需要合适的沉积条件。截止2002年底，世界上共有l16处已直接或间接发现水合物，直接见到水合物样品的只有23处(海洋20处、陆地3处)，所以对水合物沉积条件的系统研究处于比较薄弱的阶段，文献报道也较少，目前认为其形成的沉积控制因素主要有岩性、沉积速率、有机碳含量、沉积环境及沉积相等4方面。     

基于RS和GIS的唐山沿海地区湿地结构动态监测

利用历史资料和Landsat TM卫星遥感图像,研究了唐山市沿海地区湿地结构自上世纪80年代以来的演变特征,着重对1987~2004年陡河——滦河之间的湿地结构类型进行了识别,绘制了不同时期的湿地面积解译图。利用Mapinfo制图软件计算出两个时期的面积转化矩阵,对该区主要湿地类型浅海水域、滩涂、芦苇沼泽、水稻田、养殖场、盐田等湿地的面积进行了年份比较,从而分析得出唐山市沿海湿地结构从80年代至今以来破碎化加重,应该加强湿地结构的动态监测。     

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

大亚湾微表层和次表层海水营养盐的研究

根据1998年秋季（10、11月）、1999年春、秋季（4、5、10月）5个航次对大亚湾海区微、次表层的调查结果，分析了微表层海水对氮、磷、硅营养盐的富集概况，讨论了营养盐与环境因子的关系。结果表明：大亚湾海区微表层海水对氮、磷、硅营养盐均有富集作用，因海况及季节不同，富集因数（EF）与其他海区的有所差别；无论夏季或秋季，大亚湾海区微表层海水中无机氮都以NH4－N为主要存在形态；其余水层则以NO3－N为主要存在形态。结果还表明，微表层、次表层海水中NH4－N与BOD5、COD测值都呈高度显著正相关，与PO4－P和SiO3-Si含量均无相关，说明大亚湾海区水中含氮有机物较含磷有机物丰富。     

威海地区高压岩石组合及其成因演化

利用矿物地质温压计估算变质高峰期温压条件、退变质作用温压条件。研究表明,本区为鲁苏构造带的北延部分,代表本区晚元古代华南陆块与华北陆块的碰撞及三叠纪华北陆块向华南陆块推覆事件的发生和演化。     

鲁南近浅海沉积物样品的因子分析及其地质意义

本文提出河流携带入海的沉积物或沿岸剥蚀物中矿物的分布及再组合是受多种因素控制的。为了确定控制鲁南两城河至白马河沉积物样品中矿物分布及再组合的主要因素,作者对该区109个沉积物样品的重矿物资料进行了Q型和R型因子分析。研究指出,在诸多的河流中,白马河和两城河是控制该区沉积物分布的最上要的河流;矿物的化学稳定性是决定该区矿物再组合的主要因素。     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.