Internal deformation of Sikhote Alin volcanic belt, far eastern Russia: Paleocene paleomagnetic results

We present paleomagnetic results of Paleocene welded tuffs of the 53–50 Ma Bogopol Group from the northern region (46°N, 137°E) of the Sikhote Alin volcanic belt. Characteristic paleomagnetic directions with high unblocking temperature components above 560 °C were isolated from all the sites. A tilt-corrected mean paleomagnetic direction from the northern region is D=345.8°, I=49.9°, α₉₅=14.6° (N=9). The reliability of the magnetization is ascertained through the presence of normal and reversed polarities. The mean paleomagnetic direction from the northern region of the Sikhote Alin volcanic belt reflects a counterclockwise rotation of 29° from the Paleocene mean paleomagnetic direction expected from its southern region. The counterclockwise rotation of 25° is suggested from the paleomagnetic data of the Kisin Group that underlies the Bogopol Group. These results establish that internal tectonic deformation occurred within the Sikhote Alin volcanic belt over the past 50 Ma. The northern region from 44.6° to 46.0°N in the Sikhote Alin volcanic belt was subjected to counterclockwise rotational motion through 29±17° with respect to the southern region. The tectonic rotation of the northern region is ascribable to relative motion between the Zhuravlevka terrane and the Olginsk–Taukhinsk terranes that compose the basements of the Sikhote Alin volcanic belt.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Unstable Climate Oscillations during the Late Holocene in the Eastern Bransfield Basin, Antarctic Peninsula

Core A9-EB2 from the eastern Bransfield Basin, Antarctic Peninsula, consists of pelagic (diatom ooze-clay couplets and bioturbated diatom ooze) and hemipelagic (bioturbated mud) sediments interbedded with turbidites (homogeneous mud and silt–clay couplets). The cyclic and laminated nature of these pelagic sediments represents alternation between the deposition of diatom-rich biogenic sediments and of terrigenous sediments. Sediment properties and geochemical data explain the contrasting lamination, with light layers being finer-grained and relatively rich in total organic carbon and biogenic silica content. Also, the high-resolution magnetic susceptibility (MS) variations highlight distinct features: high MS values coincide with clastic-rich sections and low MS values correspond to biogenic sections. The chronology developed for core A9-EB2 accounts for anomalous ages associated with turbidites and shows a linear sedimentation rate of approximately 87 cm/10³ yr, which is supported by an accumulation rate of 80 cm/10³ yr calculated from ²¹⁰Pb activity. The late Holocene records clearly identify Neoglacial events of the Little Ice Age (LIA) and Medieval Warm Period (MWP). Other unexplained climatic events comparable in duration and amplitude to the LIA and MWP events also appear in the MS record, suggesting intrinsically unstable climatic conditions during the late Holocene in the Bransfield Basin of Antarctic Peninsula.     

Slab breakoff: a model for Caledonian, Late Granite syn-collisional magmatism in the orthotectonic (metamorphic) zone of Scotland and Donegal, Ireland

None of the existing models for calc-alkaline “Late Granite” (Siluro–Devonian) genesis in the metamorphic Caledonian orogenic belt of Ireland and Scotland fully explains their spatial, age or chemical character. A consistent model must involve the closure of Iapetus Ocean, where slab breakoff is a natural consequence of attempted subduction of continental crust. Expected outcome is a long linear belt of high-K, calc-alkaline magmas, some with characteristic trace element signatures, specifically high Ba, Sr and Zr. Other features include the critical magmatic association of coeval appinite and granite, rapid uplift, erosion and the low-grade regional metamorphism in the Southern Uplands. The linear heat pulse on breakoff is spatially, intensity and time limited producing small volume melts emplaced as separated plutons, over a short time span. Magmatism in the Caledonian metamorphic belt is accurately accounted for by slab breakoff on collision of Baltica with the Scoto–Greenland margin during the Scandian orogeny, following Iapetus Ocean closure. The two chemically, isotopically and areally distinctive suites in the metamorphic belt in Scotland, viz. the Argyll and Cairngorm Suites, can be modelled by reference to the Donegal granites where sequential partial melting of new, lamprophyric underplated crust, then shallower old crust, as heat conduction moved up through the crust on slab breakoff, produced magmas characteristic of the two suites.     

Lithosphere structure of European sedimentary basins from regional three-dimensional gravity modelling

A three-dimensional (3D) density model, approximated by two regional layers—the sedimentary cover and the crystalline crust (offshore, a sea-water layer was added), has been constructed in 1° averaging for the whole European continent. The crustal model is based on simplified velocity model represented by structure maps for main seismic horizons—the “seismic” basement and the Moho boundary. Laterally varying average density is assumed inside the model layers. Residual gravity anomalies, obtained by subtraction of the crustal gravity effect from the observed field, characterize the density heterogeneities in the upper mantle. Mantle anomalies are shown to correlate with the upper mantle velocity inhomogeneities revealed from seismic tomography data and geothermal data. Considering the type of mantle anomaly, specific features of the evolution and type of isostatic compensation, the sedimentary basins in Europe may be related into some groups: deep sedimentary basins located in the East European Platform and its northern and eastern margins (Peri-Caspian, Dnieper–Donets, Barents Sea Basins, Fore–Ural Trough) with no significant mantle anomalies; basins located on the activated thin crust of Variscan Western Europe and Mediterranean area with negative mantle anomalies of −150 to −200×10⁻⁵ ms⁻² amplitude and the basins associated with suture zones at the western and southern margins of the East European Platform (Polish Trough, South Caspian Basin) characterized by positive mantle anomalies of 50–150×10⁻⁵ ms⁻² magnitude. An analysis of the main features of the lithosphere structure of the basins in Europe and type of the compensation has been carried out.     

États de contraintes et mécanismes d'ouverture et de fermeture des bassins permiens du Maroc hercynien. L'exemple des bassins des Jebilet et des RéhamnaStates of stresses and opening/closing mechanisms of the Permian basins in Hercynian Morocco. The example of the Jebilet and Réhamna Basins

The fracturing analysis in the Permian basins of Jebilet and Rehamna (Hercynian Morocco) and the underlying terranes allowed us to suggest a model for their opening. Three tectonic episodes are distinguished: a transtensional episode NNE–SSW-trending (Permian I), occurring during the opening along sinistral wrench faults N70–110-trending, associated with synsedimentary normal faults; a transpressive episode ESE–WNW-trending (Permian II), initiating the closure, the normal faults playing back reverse faults and the N70 trending faults dextral wrench faults; a compressional episode NNW–SSE (post-Permian, ante-Triassic), accentuating the closure and the deformation and putting an end to the Tardi-Hercynian compressive movements. To cite this article: A. Saidi et al., C. R. Geoscience 334 (2002) 221–226.     

雄关漫道真如铁——论中国油气二次创业

半个多世纪以来，中国经历了油气资源的第一次创业，在祖国大陆和近海大陆架地区的新生代陆相碎屑岩沉积盆地中，发现了一批油气田，使原油年产量达1．67亿吨，位居世界第五，天然气疸这241亿立方米，居世界第十五位，成绩是巨大的，但是，1993年开始进口原油3000万吨，2000年进口原油7200万吨，严重影响国家经济建设，而且这种趋势还在不断发展，预测2010年将进口原油1亿吨，天然气200亿立方米，那么，中国油气资源的出路何在？作者指出，从中国大地构造演化来看，前新生代海相残留盆地还有巨大的油气潜力，尽管其勘探的难度是世界级的，但是，只要我们切实地依靠科学技术，进行油气资源的二次创业，困难上，在实践中克服困难，就可以发现更多的石油天然气，支持国家经济建设的持续发展。     

山东海阳断裂东石兰沟段晚更新世以来地表断错特征与最大潜在地震估计

海阳断裂是胶东半岛NE向牟平 -即墨断裂带东部一条规模较大的断裂 ,尽管晚更新世以来该断裂的地表断错活动总体上已基本停息 ,但东石兰沟段在晚更新世晚期以来仍有断错地表的活动。最后一次断错地表的活动发生在距今 3 7～ 1 2万年 ,但接近 1 2万年。地表破裂长度约6 5km ,活动段长度 8km。地表断错以走滑活动为主 ,可见最大倾滑位移 0 2m ;根据断层擦痕侧伏角推测最大水平位移 1 13m。最后一次断错地表的活动若以距今 1 2万年计算 ,则最大平均倾滑速率为 0 0 17mm/a ;最大平均右旋走滑速率为 0 0 94mm/a。野外观测到该活动段的断错活动表现为突发断错 ,根据地震地表破裂参数、活动段长度与地震的关系 ,估计其最大潜在地震为 6 级     

Natural hydraulic cracking: numerical model and sensitivity study

Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions.