Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

从盘县红岩洞金矿的发现看化探找矿方法及效果

盘县红岩洞金矿是应用地球化学勘查方法发现的金矿体,回顾发现该矿体的过程,研究地球化学特征,讨论应用地球化学勘查方法寻找微细浸染型金矿的工作方法及经验。     

Spatial Analysis Techniques as Successful Mineral-Potential Mapping Tools for Orogenic Gold Deposits in the Northern Fennoscandian Shield,Finland

Geoscientific Information Systems (GIS) provide tools to quantitatively analyze and integrate spatially referenced information from geological, geophysical, and geochemical surveys for decision-making processes. Excellent coverage of well-documented, precise and good quality data enables testing of variable exploration models in an efficient and cost effective way with GIS tools. Digital geoscientific data from the Geological Survey of Finland (GTK) are being used widely as spatial evidence in exploration targeting, that is ranking areas based on their exploration importance. In the last few years, spatial analysis techniques including weights-of-evidence, logistic regression, and fuzzy logic, have been increasingly used in GTK’s mineral exploration and geological mapping projects. Special emphasis has been put into the exploration for gold because of the excellent data coverage within the prospective volcanic belts and because of the increased activity in gold exploration in Finland during recent years. In this paper, we describe some successful case histories of using the weights-of-evidence method for the Au-potential mapping. These projects have shown that, by using spatial modeling techniques, exploration targets can be generated by quantitatively analyzing extensive amounts of data from various sources and to rank these target areas based on their exploration potential.     

A New Approach for Border Detection of the Dumluca (Turkey) Iron Ore Area: Wavelet Cellular Neural Networks

Anomaly analysis is used for various geophysics applications such as determination of geophysical structure's location and border detections. Besides the classical geophysical techniques, artificial intelligence based image processing algorithms have been found attractive for geophysical anomaly analysis. Recently, cellular neural networks (CNN) have been applied to geophysical data and satisfactory results are reported. CNN provides fast and parallel computational capability for geophysical image processing applications due to its filtering structure. The behavior of CNN is defined by two template matrices that are adjusted by a properly supervised learning algorithm. After training stage for geophysical data, Bouguer anomaly maps can be processed and analyzed sequentially. In this paper, CNN learning and processing capability have been improved, combining Wavelet functions and backpropagation learning algorithms. The new architecture is denoted as Wavelet-Cellular Neural networks (Wave-CNN) and it is employed to analyze Bouguer anomaly maps which are important to extract useful information in geophysics. At first, Wave-CNN performance is tested on synthetic geophysical data, which are created by a computer environment. Then, Bouguer anomaly maps of the Dumluca iron ore field have been analyzed and results are reported in comparison to real drilling results.     

Crustal structure using receiver function in the east part of A＇nyemaqen suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10～40 km in the crust between Aba arc fault and northern edge fault of Qinling earth＇s axis and it is a tectonic feature of complex geological process such as ancient A＇nyemaqen Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.     

Geology and geochemistry of the Bingdaban ophiolitic mélange in the boundary fault zone on the northern Central Tianshan Belt,and its tectonic implications

The properties and tectonic significance of the fault bound zone on the northern margin of the Central Tianshan belt are key issues to understand the tectonic framework and evolutionary history of the Tianshan Orogenic Belt. Based on the geological and geochemical studies in the Tianshan orogenic belt, it is suggested that the ophiolitic slices found in the Bingdaban area represent the remaining oceanic crust of the Early Paleozoic ocean between the Hazakstan and Zhungaer blocks. Mainly composed of basalts, gabbros and diabases, the ophiolites were overthrust onto the boundary fault between the Northern Tianshan and Central Tianshan belts. The major element geochemistry is characterized by high TiO₂ (1.50%–2.25%) and MgO (6.64%–9.35%), low K₂O (0.06%–0.41%) and P₂O₅ (0.1%–0.2%), and Na₂O>K₂O as well. Low ΣREE and depletion in LREE indicate that the original magma was derived from a depleted mantle source. Compared with a primitive mantle, the geochemistry of the basalts from the Bingdaban area is featureded by depletion in Th, U, Nb, La, Ce and Pr, and unfractionated in HFS elements. The ratios of Zr/Nb, Nb/La, Hf/Ta, Th/Yb and Hf/Th are similar to those of the typical N-MORB. It can be interpreted that the basalts in the Bingdaban area were derived from a depleted mantle source, and formed in a matured mid-oceanic ridge setting during the matured evolutionary stage of the Northern Tianshan ocean. In comparison with the basalts, the diabases from the Bingdaban area show higher contents of Al₂O₃, ΣREE and HFS elements as well as unfractionated incompatible elements except Cs, Rb and Ba, and about 10 times the values of the primitive mantle. Thus, the diabases are thought to be derived from a primitive mantle and similar to the typical E-MORB. The diabases also have slight Nb depletion accompanying no apparent Th enrichment compared with N-MORB. From studies of the regional geology and all above evidence, it can be suggested that the diabases from the Bingdaban area were formed in the mid-oceanic ridge of the Northern Tianshan ocean during the initial spreading stage. Supported by the Major State Research Program of PRC (Grant No. 2001CB409801), the National Natural Science Foundation of China (Grant Nos. 40472115 and 40234041) and the State Research Program of China Geological Survey (Grant No. 2001130000-22)     

Zircon SHRIMP U-Pb ages and trace element geochemistry of the Kuhai gabbro and the Dur''''ngoi diorite in the southern east Kunlun tectonic belt, Qinghai, Western China and their geological implications

Timing of the intermediate-basic igneous rocks developed in the area of Kuhai-A'nyêmaqên along the southern east Kunlun tectonic belt is a controversial issue. This paper presents new zircon SHRIMP U-Pb dating data for igneous zircons from the Kuhai gabbro and the Dur'ngoi diorite in the Kuhai-A'nyemaqen tectonic belt, which are 555±9 Ma and 493±6 Ma, respectively. The trace element geochemical features of the Kuhai gabbro and the Dur'ngoi diorite are similar to those of ocean island basalts (OIB) and island arc basalts (IAB), respectively. Thus, the Kuhai gabbro with the age of 555±9 Ma and OIB geochemical features is similar to the Yushigou oceanic ophiolite in the North Qilian orogen, whereas the Dur'ngoi diorite with the age of 493±6 Ma and IAB geochemical features is similar to the island arc volcanic rocks developed in the north Qaidam. The Late Neoproterozoic to Early Ordovician ophiolite complex in the area of Kuhai-A'nyêmaqên suggests that the southern margin of the "Qilian-Qaidam-Kunlun" archipelagic ocean in this period was located in the southern east Kunlun tectonic belt. Therefore, the southern east Kunlun tectonic belt in the early Paleozoic is not comparable to the Mianlüe tectonic belt in the Qinling orogenic belt.     

造山带构造研究中几个重要学术概念问题的讨论

简要分析和评述了造山带构造研究中的几个重要学术概念问题：造山带，造山带类型、造山作用和造山过程、造山带构造格局、造山作用模式。指出不宜将造山带定义直接与板块边缘构造位置和板块间相互作用联系在一起；造山作用和造山带不仅出现在板块之间相互作用的地带，而且可以出现在远离板边界的地方－－即所谓板内造山带。强调了板内造山带研究的重要性，提出了确定板内造山的主要依据，指出在造山带分类、造山带构造山带。强调了板内造山带研究的重要性，提出了确定内造山带的主要依据，指出在造山带分类、造山带构造格局和造山作用过程中应充分注意内造山带的客观存在，以及板内造山带成因动力机制研究中需要着重考虑的重要方面。     

矿区构造变形岩相形迹填图、矿化趋势度的实测及其地质找矿——以胶东玲珑金矿田阜山金矿区为例

以玲珑金矿田阜山金矿区为实测地区，研究了胶东构造岩浆岩浆活化区玲珑-焦家式金矿的矿源岩系，对2km^2内矿源岩的构造变形岩相形变进行1/2000填图。在此基础上，提出矿化趋势度（MTD）的概念并完成阜山金矿区矿化趋势度的分布图。矿化趋势度的概念及其填图研究方法对于探讨将成矿模型转化为找矿模型、逐步建立更具体量化的找矿预测实测方法有重要的参考价值和应用前景。