四川稻城竹鸡顶铜矿地质特征及成矿特点

竹鸡顶斑岩型铜矿位于西南三江成矿带内,热液蚀变以青磐岩化、泥化为特征。区内现已圈出1个矿带和2个矿化带,并有幅频激电异常、土壤铜异常与之套合。该区具有较好的找矿前景。     

河南省南召县梅子垛铁矿矿床成矿地质特征及矿石加工技术性能

2005～2007年,在河南省南召县白土岗-南河店-带发现数十个风化花岗闪长岩型超贫磁铁矿床。矿体的形态、产状、规模与花岗闪长岩体基本一致,矿石类型、成分简单,磁性铁品位2．79～13．28％,平均9．02％,矿石易采易选,在当前经济技术条件下,开采该类矿床具较好经济效益。笔者以梅子垛铁矿为例分析说明该类矿床成矿地质特征及矿石加工技术性能。     

牟平邓格庄金矿地质特征及找矿方向

邓格庄金矿成因类型为中温热液充填式富硫含金黄铁矿石英脉型金矿床。通过对邓格庄金矿床的地质特征、控矿因素及矿床成因的系统研究,认为矿区NNE向断裂与其他方向断裂交汇部位为金矿的有利成矿部位,在分析找矿标志的基础上,提出应加大矿区深部及外围的找矿力度,进一步查证地球物理、化学异常,以期发现新的金矿远景区,进而指出了深部找矿的方向。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

河南石板沟金矿矿床地质特征及成因探讨

在总结石板沟金矿床矿化地质特征的基础上,通过对矿石氢氧同位素测试和矿石微量元素相关分析,认为成矿热液主要来源于变质水,矿床成矿环境应属低温环境,矿床成因类型属受构造剪切带控制的低温变质热液蚀变型金矿床。     

New data on the correlation of skarn and gold mineralization at the Tardan deposit (northeastern Tuva)

Gold mineralization of the Tardan deposit is of different spatial occurrences and is related to different hydrothermal-metasomatic formations, the main ones being skarn-magnetite bodies, metasomatites of mineralized crush zones, and metasomatites of argillizitic-rock association. The formation of gold mineralization was a multistage process related to the repeated magmatism of the Tannu-Ola complex. It took place in a wide temperature range (400–150 °C), which determined the diversity of produced mineral assemblages. The gold mineralization associated with magnetite bodies shows a spatial correlation with magnesian and calcareous skarns and is localized in plagiogranites and gabbro-diorites of the Tannu-Ola complex intruded in the Late Ordovician. Gold mineralization that occurs in crush zones and along the fault sutures in moderate- and low-temperature hydrothermal-metasomatic rocks (propylites, beresites, serpentinites, and argillizites) formed somewhat later than skarns as a result of the intrusion of granite dike bodies. Comparative analysis of different types of gold mineralization showed both a change of mineral assemblages of the gold mineralization during the ore formation and some geochemical difference between gold and gold-bearing ores. In passing from early to late occurrences of native gold, its fineness decreases, the contents of admixtures correspondingly increase, and the gold composition changes. Gold of high-temperature rocks is rich in Cu (up to 17%), and gold of low-temperatures rocks has higher contents of Ag and Hg.     

云南东川因民铜矿金矿化特征及成因初探

因民铜矿发育两种金矿化类型:一是铜矿的伴生金;二是热液构造蚀变岩型。化探样品分析结果显示,金矿化主要赋存于金箔箐断层上、下盘的角砾状蚀变岩内,空间上受岩性和断裂构造的双重控制。邻区拖布卡金矿的成矿地质背景与本区相似,在成矿地质年代上作以类比推测,认为喜马拉雅期是主成矿期。另外通过对光片镜下和化探原生晕样聚类分析研究,发现构造蚀变岩型金矿化具明显的多期多阶段性及热液特征。     

西藏冈底斯矿带成矿作用及远景分析

冈底斯带矿床众多,类型复杂,主要有斑岩型铜（金钼）矿床、矽卡岩型铁铜-铅-锌（银）矿床、层控铅-锌-银矿床、火山岩型金-银矿床及雄村式铜-金矿床。矿床地质特征和同位素年龄表明,冈底斯带南部的矿床与新特提斯洋壳向北俯冲-陆陆碰撞及碰撞期后的构造岩浆事件有关;冈底斯带北部的矿床与班公湖-怒江洋壳向南俯冲-陆陆碰撞及碰撞期后构造岩浆事件有关。冈底斯带与洋壳的俯冲-碰撞有关的岩浆活动强烈,成矿条件优越。西藏高原在碰撞后发生了快速抬升剥蚀,部分矿床顶部出现低温组合矿化,多数矿床保存良好。     

华南重要金属矿床的成矿规律——时代爆发性、空间分带性、基底继承性和热隆起成矿

华南热液矿床形成的时代爆发性、空间分带性及其成矿元素对前寒武纪基底的继承性表明,构成华南基底和含矿建造的前寒武纪地层（主要为元古界）是华南陆内热液成矿作用的主要成矿物质来源,燕山期花岗岩类是热液成矿作用的主要成矿能量来源;华南热液成矿的区域分布趋势、矿床形成过程和成矿岩体演化等,均表现出与构造热隆起动态有关的成矿特征。多期花岗岩类侵入和迅速块断隆升造成地温梯度增高,基底含矿建造提供成矿物质,以及有利的热液通道和扩容空间是造成构造隆起带或盆地“凹中隆”成矿的重要条件。燕山期花岗岩成岩成矿与大陆地壳的多旋回熔融或再循环有密切的成因关系;地震层析图像资料显示,华南中生代软流圈上涌是造成华南陆壳热隆起的动力学因素。但其成因不同于地幔柱机制,具有被动上涌特征,可能与太平洋板块俯冲形成的大型冷幔柱下沉和地幔过渡带崩溃有关。     

Geochemistry of the Mian-Lue ophiolites in the Qinling Mountains, central China: Constraints on the evolution of the Qinling orogenic belt and collision of the North and South China Cratons

The Anzishan ophiolite, a typical ophiolitic block of early Carboniferous age in the Mian-Lue suture zone of the Qinling Mountains, central China, consists of amphibolites/metabasalts, gabbros and gabbroic cumulates. All of these rocks, as well as those in the Hunshuiguan-Zhuangke (HZ) block, have compositions similar to normal MORB and back-arc basin basalts (BABB) with high ε_Nd(t) values, indicating that they were derived from a depleted mantle source. The Mian-Lue suture zone also contains blocks of other lithologies, e.g., rift volcanic rocks in the Heigouxia block and arc volcanic rocks in the Sanchazi block. Although they are in fault contact with each other, the presence of these different blocks in the Mian-Lue suture zone may represent a complete Wilson cycle, from initial rifting to open ocean basin to final subduction and continent-continent collision, during the late Paleozoic-early Triassic. In this region, the North and South China Cratons were separated by Paleo-Tethys at least until the early Carboniferous, and final amalgamation of both cratons along the Qinling orogenic belt took place in the Triassic.