华北地台北缘成矿带大青山绿岩型金矿地质特征

本文详细阐述了大青山地区绿岩型金矿的地质特征和找矿标志,指出金矿化带赋存在二道洼群大理岩与其它岩层的接触部位,同时受韧性剪切带控制,在大理岩褶曲部位或下层位有利于形成较富矿体。该类型金矿的发现,大大地拓展了在大青山地区的找矿空间。     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.     

玛曲县格尔柯金矿床控矿地质条件及其矿床成因探讨

格尔柯金矿 (即大水金矿 )是产于西秦岭南带西倾山—迭山逆冲褶断带南缘的特大型金矿。矿床控矿地质条件为构造单元界断裂带、深源浅成花岗闪长斑岩小侵入体、下三叠统马热松多组 (T1m)碳酸盐岩沉积建造 ,与金矿关系密切的矿化蚀变有硅化、赤铁矿化、褐铁矿化和方解石化 ;矿床成因类型为层控—热水溶滤构造蚀变岩型。     

甘肃小柳沟钨多金属矿地质特征及成矿模式

小柳沟钨多金属矿于 90年代初发现 ,目前已具大型、超大型规模。共有 4个矿床。成矿主要与长城系朱龙关群和隐伏花岗岩有关。该矿床成矿物质来源具双重性 ,成矿温度为中高温 ,成矿流体为中等盐度 ,同位素计算模式年龄确定其成矿于加里东期。矿床成因属于火山喷发沉积—岩浆热液改造矿床。     

山东省胶莱盆地东北缘宋家沟金矿地质特征及其成因初探

山东省宋家沟金矿位于胶莱盆地东北缘 ,产于莱阳群林寺山组断裂破碎带中。牟—即断裂带为切割莱阳群的断裂 ,对金矿起控制作用。早白垩纪晚期的火山—岩浆活动为深部含金热液的运移提供了通道 ,并在其有利的构造部位沉淀成矿。稀土元素特征和氧、硫同位素特征亦说明宋家沟金矿的物质来源以深源为主 (幔源及下地壳中的金 ) ,是早白垩世晚期的火山—岩浆活动作用的结果。     

华北陆块北缘西段中元古代与裂谷作用有关的铁、稀土、多金属矿床特征及成因

华北陆块北缘西段狼山—白云鄂博裂谷系中元古代形成的大型多金属矿床 ,是我国重要的铁、稀土、铜、铅、锌矿产地。矿床为产于沉积岩中热水沉积型多金属矿床。其形成受地层、构造控制 ,与裂谷作用有着密切的关系。裂谷系内外分支的地质环境及矿床矿种不同 ,导致矿床特征及成因具有一定差异。白云鄂博铁、稀土矿床为钾、钠、磷等含量较高的热水沉积型 ,霍各乞铜、铅、锌多金属矿床为与中基性火山岩有关的过渡热水沉积型 ,东升庙和甲生盘等铅、锌多金属矿床为热水沉积型。文中将对上述矿床分别进行论述。     

Sulfur Content and Isotopic Ratio of Cambro-Ordovician Carbonate Rocks from South Korea: A Possible Source for Mesozoic Magmatic-hydrothermal Ore Sulfur

Abstract: Carbonate rocks of Cambrian (18 samples) and lower-middle Ordovician (11 samples) ages from South Korea were analyzed for sulfur contents of structurally substituted sulfate (SSS) and sulfides and their δ³⁴S values. The δ³⁴S values of SSS ranging from +25.9 to +45.2 permil, are averaged as +33.6 and +33.5 permil for the Cambrian and Ordovician rocks, respectively, which indicate high δ³⁴S values of the Cambro-Ordovician seawater. The SSS contents in the carbonate rocks are low being 2.9 to 17.3 ppm S (averaged as 7.0 ppm S). Sulfide sulfur, on the contrary, is much abundant containing 3 to 1,880 ppm S and the δ³⁴S values range widely between –17.6 and +31.1 permil. Sulfide sulfur of the studied rocks excluding impure carbonates has an average content of 187 ppm S and δ³⁴S value of +12.8 permil (n=24). The estimated δ³⁴S (sulfate–sulfide) values, which range from 13.8 to 25.4 permil in general with a few exceptions from 36.5 up to 52.3 permil for some impure carbonates, may provide evidence for the persistent oceanic anoxia with its temporary recovery during the Cambro-Ordovician time.
The SSS and sulfide sulfurs have often higher δ³⁴S values than the Mesozoic-Cenozoic ore sulfur (Ishihara et al., 2000). Since carbonate rocks are very reactive with circulating hydrothermal ore solution, high δ³⁴S values of the Korean ore deposits might be caused to some extent by ³⁴S enrichment from the host carbonates, resulting in the low SSS contents observed.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

Timing of Fracture Formation and Duration of Mineralization at the Hishikari Deposit, Southern Kyushu, Japan

Abstract. The Hishikari epithermal gold deposit consists of the Honko-Sanjin zone and Yamada zone. On the basis of observed crosscutting relationships of veins, vein system in the Hishikari deposit was classified into the early and late veins. They differ from orientation, width, control by unconformity, the amount of displacement and structural features, but have similarity in gold grade and Au/Ag ratios. K-Ar ages are presented for the classified veins to clarify timing of fracturing and duration of mineralization.
Age determination revealed that the early veins in the Honko-Sanjin zone range from 0.86 to 1.11 Ma and that the late veins range from 0.73 to 0. 84 Ma. The economically most important mineralization in the Hishikari deposit occurred around 0.90 Ma in a very short period (about 0.05 million years).
The distribution of mineralization age in the whole Hishikari deposit, occurrences of slickensides and ground water temperatures imply that mineralization lasted longer in the southern part of the deposit. As compared the early veins with late veins, structural changes including width, strike, dip and vein characteristics occurred at around 0.85 Ma.     

Geochronology of Gold Deposits and Its Implication for Metallogenesis in the Fengxian-Lixian Area, Qinling Orogenic Belt, China

Abstract: A series of super large‐scale and large‐scale Pb and Zn, and Au deposits are distributed in the Qinling orogenic belt, China. Gold deposits were generally ascribed to Carlin‐type originated from circular meteoric water. Visible and coarse‐grained gold (up to over 3mm in grain size) was recently identified in some gold deposits in the Fengxian‐Lixian area, Qinling. Au‐bearing quartz lodes related to magmatism were discovered in the Xiaogouli gold deposit. Two types of Au‐bearing quartz veins, i.e., NW‐trending quartz veins and NE‐trending quartz veins cutting strata are widely present in the Baguamiao gold deposit. Both are spatially associated with each other. The former is generally snake–like, S‐shape or zigzag, which was resulted from plastic deformation by ductile shearing, being generally cut by the latter. The latter is generally linear with widely developed bleaching alteration zones in its adjacent wall rocks, which symbolizes the superimposition of brittle deformation and filling and metasomatism of magmatic hydrothermal solution in ductile shear zones after uplifting of the shear zones near the surface. The NW‐trending quartz veins contain Au of lower than 3ppm. The NE‐trending quartz veins contain Au of more than 3 ppm, so that NE‐trending quartz veins and the adjoining altered rocks are important ores. The NW‐trending Au–bearing quartz vein was dated as 210.61.26 to 232.581.59 Ma by ⁴⁰Ar–³⁹Ar method, i.e., late Indosinian epoch (Triassic). The NE‐trending Au–bearing quartz vein was dated as 131.910.89 to 197.451.13 Ma by ⁴⁰Ar–³⁹Ar method, i.e., Yanshanian epoch (Jurassic). The ⁴⁰Ar–³⁹Ar age of the NW‐trending Au–bearing quartz veins represents the age of the ductile shear formation. The isotope data of the NE‐trending quartz veins indicate that gold mineralization was closely related to Indosinian and Yanshanian granite intrusives not only in time and space, but also in origin.