Distribution Characteristics of Effective Source Rocks and Their Control on Hydrocarbon Accumulation: A Case Study from the Dongying Sag, Eastern China

The exploration conducted in the Bohai Bay basin, eastern China has demonstrated that the abundant petroleum resources have close affinities to the hydrocarbon kitchen with rich organic matter. A number of oil-generating associations with various characteristics of organic geochemistry and assemblages of multiple reservoir facies are developed due to the multi-center sedimentation, multi-source supply and multi-cycle evolution of filling, which have resulted in the formation of multiple oil and gas accumulation zones of various layers and trap styles. Among them the Paleogene Shahejie Formation is the most important hydrocarbon accumulation combination in the Dongying sag. Heretofore, its proved reserve has reached nearly 1.8×109t, which accounts for more than 90% of the total proved reserves of the Dongying sag. Based on previous studies, more than 600 source rock samples and 186 crude oil samples of the Shahejie Formation, collected from 30 oilfields, have been treated with organic geochemical testing     

凤太矿集区金铅锌矿地球化学特征及找矿方向

通过对金、铅锌矿成矿规律和地球化学特征的研究,讨论陕西凤太矿集区今后的找矿方向,并初步圈定了4处找矿靶区.     

西藏冈底斯西段狮多地区火山岩的地质地球化学特征

西藏冈底斯西段狮多地区火山岩为一套高钾钙碱性和钙碱性系列岩石,分为古新世(59 7Ma)和中新世(17 2Ma)两个活动时期,早期的时代和层位大致相当于冈底斯东段的林子宗群典中组。与典中组火山岩相比较,该期火山岩的稀土元素总量(w(∑REE)=58 83×10-6)低得多,轻、重稀土分馏程度(w(La)N/w(Yb)N=3 44)较弱,分布曲线更为平缓;N(143Nd)/N(144Nd)的现在值(0 512275～0 512420)和初始值εNd(t)(-6 7～-4 0)也明显偏低,这反映冈底斯东、西段同一时期的火山活动及演化各具特色。根据Pb、Nd、Sr同位素的组成特征和微量元素构造环境判别推断,狮多地区火山岩形成于陆缘弧—陆 陆碰撞造山的发展演化环境,是新特提斯洋壳向大陆下俯冲作用过渡到陆 陆碰撞造山作用的产物。狮多铁 铜矿与古新世火山岩有成因联系。     

大坪金矿床石英的标型特征及其地质意义

文章论述石英的物理性质、化学成分、包裹体特征及同位素组成,从而提供了有关大坪金矿床的成矿作用、矿床成因及找矿远景等方面的矿物学标志.     

滇中地区铝土矿床地质特征及成矿规律

通过对滇中地区典型铝土矿(老煤山铝土矿)成矿地质特征研究, 认为该区铝土矿为古风化壳沉积型铝土矿, 主要受地层层位、岩性古地理条件、褶皱构造及后期抬升改造影响。研究认为该区具有一定勘探潜力。     

福建尤溪山头顶银金多金属矿土壤异常特征及找矿效果

尤溪山头顶矿区通过土壤测量,分析多元素衬度累加异常特征、异常元素组合特征,优选异常进行查证,经地表探槽揭露及深部钻孔验证,发现2个规模较大的银金多金属矿（化）带,新发现银金多金属矿体12个,取得较好的找矿效果.     

辽宁东胜铅金矿床地质地球化学特征

东胜铅金矿产于NE向板石沟断裂中,赋矿围岩为大石桥组大理岩.矿床地质特征和矿床地球化学特征表明,矿床为岩浆热液产物,成矿物质部分来自于地层,成矿热液中有大气降水的渗入,成矿温度为205～286℃,成矿流体密度为0.95～1.02 g/cm3,成矿压力为40～55MPa.     

东昆仑阿克楚克塞地区辉长岩地球化学特征、锆石U-Pb年龄及其构造意义

东昆仑地区基性-超基性岩石的研究较薄弱,缺乏对东昆仑幔源岩浆活动及岩浆演化的整体认识。对阿克楚克塞辉长岩进行了地球化学、锆石U-Pb年代学及Hf同位素研究,结果显示,该岩石形成于晚三叠世早期(219.3±1.1Ma,MSWD=0.80);岩石SiO2含量为49.03%~57.26%,Mg#值为49~57,属于钙碱性系列岩石;稀土元素配分曲线为轻稀土元素富集的右倾型,富集大离子亲石元素Rb、Ba、K,相对亏损高场强元素Nb、Ta、Ti;εHf(t)=-1.81~3.25,锆石Hf模式年龄大于锆石结晶年龄。地球化学特征显示,阿克楚克塞辉长岩岩浆源区应为受俯冲板片流体交代的岩石圈地幔。结合区域构造背景分析,阿克楚克塞辉长岩形成于印支期造山后伸展的构造环境,继承了早期板片俯冲改造的地幔源区特征。     

随钻测量、随钻测井与录井工具

摆动阀泥浆脉冲器本身可以产生较高频率的载波,成为高速泥浆脉冲传输的较好选择。由于工作时负载力矩复杂,影响因素众多,为电机输出特性研究带来较大困难。利用在井下工作时的动力学平衡方程,通过水循环实验方式测量得到摆动阀电机在最大转矩比电流控制方式下的位置角度和输出电流数据,进而计算井下工作时电机输出转矩和输出功率,并对其影响因素进行综合分析。结果表明,受惯性转矩、弹性转矩和动态水力转矩的影响,电机输出转矩在不同工作频段表现为不同特征;低频段时,电机输出转矩的变化幅度随载波频率的增大而减小,输出功率随载波频率的增大而缓慢增大;中低频段时,电机输出转矩和输出功率在该频段幅度变化较小,相对比较稳定;高频段时,电机输出转矩和输出功率均随频率的增大而快速增大。可以通过增大扭杆刚度系数和降低摆动阀转子轴系转动惯量的方式降低电机在高频段的输出,以保证电机在额定转矩和额定功率下可以控制摆动阀在井下实现高频快速的摆动,产生稳定高载波频率下的泥浆脉冲压力波形,实现高频载波的目的,为随钻测井数据的高速传输提供了保障。

     

Centrifuge modelling of landslides and landslide hazard mitigation: A review

Landslides are serious geohazards that occur under a variety of climatic conditions and can cause many casualties and significant economic losses. Centrifuge modelling, as a representative type of physical modelling, provides a realistic simulation of the stress level in a small-scale model and has been applied over the last 50 years to develop a better understanding of landslides. With recent developments in this technology, the application of centrifuge modelling in landslide science has significantly increased. Here, we present an overview of physical models that can capture landslide processes during centrifuge modelling. This review focuses on (i) the experimental principles and considerations, (ii) landslide models subjected to various triggering factors, including centrifugal acceleration, rainfall, earthquakes, water level changes, thawing permafrost, excavation, external loading and miscellaneous conditions, and (iii) different methods for mitigating landslides modelled in centrifuge, such as the application of nails, piles, geotextiles, vegetation, etc. The behaviors of all the centrifuge models are discussed, with emphasis on the deformation and failure mechanisms and experimental techniques. Based on this review, we provide a best-practice methodology for preparing a centrifuge landslide test and propose further efforts in terms of the seven aspects of model materials, testing design and equipment, measurement methods, scaling laws, full-scale test applications, landslide early warning, and 3D modelling to better understand the complex behaviour of landslides.