Vertical velocity distributions through and above submerged,flexible vegetation

Abstract

A one-dimensional steady-state model was constructed and used to study vertical profiles of longitudinalvelocities in open channel flows through, and above, submerged vegetation. The eddy viscosity was evaluated by using the analogue of the mixing length theory. The model of water velocity profiles takes into account the surface roughness of the channel bottom and the drag exerted by submerged flexible stems. The verification of the calculated velocity profiles was carried out based on data obtained in laboratory experiments. The proportionality coefficients for the analogue of the mixing length formulae in both layers—within homogenous flexible stems and above them—were determined.     

Transpiration and plant water relations of evergreen woody vegetation on a recently constructed artificial ecosystem under seasonally dry conditions in Western Australia

Understanding transpiration and plant physiological responses to environmental conditions is crucial for the design and management of vegetated engineered covers. Engineered covers rely on sustained transpiration to reduce the risk of deep drainage into potentially hazardous wastes, thereby minimizing contamination of water resources. This study quantified temporal trends of plant water potential (ψ_p), stomatal conductance (g_s), and transpiration in a 4‐year‐old evergreen woody vegetation growing on an artificial sandy substrate at a mine waste disposal facility. Transpiration averaged 0.7 mm day^?1 in winter, when rainfall was frequent, but declined to 0.2 mm day^?1 in the dry summer, when the plants were quite stressed. In winter, the mean ψ_p was ?0.6 MPa at predawn and ?1.5 MPa at midday, which were much higher than the corresponding summer values of ?2.0 MPa and ?4.8 MPa, respectively. The g_s was also higher in winter (72.1–95.0 mmol m^?2 s^?1) than in summer (<30 mmol m^?2 s^?1), and negatively correlated with ψ_p (p < 0.05, r² = 0.71–0.75), indicating strong stomatal control of transpiration in response to moisture stress. Total annual transpiration (147.2 mm) accounted for only 22% of the annual rainfall (673 mm), compared with 77% to 99% for woody vegetation in Western Australia. The low annual transpiration was attributed to the collective effects of a sparse and young vegetation, low moisture retention of the sandy substrate, and a superficial root system constrained by high subsoil pH. Amending the substrate with fine‐textured materials should improve water storage of the substrate and enhance canopy growth and deep rooting, while further reducing the risk of deep drainage during the early stages of vegetation establishment and in the long term. Overall, this study highlights the need to understand substrate properties, vegetation characteristics, and rainfall patterns when designing artificial ecosystems to achieve specific hydrological functions. Copyright © 2011 John Wiley & Sons, Ltd.     

A note on the measurement of travel times using bender and extender elements

By using the bender and extender elements tests, the travel times of the shear (S) and the primary (P) waves were measured for dry sand samples at different relative densities and effective confining pressures. Three methods of interpretations, namely, (i) the first time of arrival, (ii) the first peak to peak, and (iii) the cross-correlation method, were employed. All the methods provide almost a unique answer associated with the P-wave measurements. On contrary, a difference was noted in the arrival times obtained from the different methods for the S-wave due to the near field effect. The resonant column tests in the torsional mode were also performed to check indirectly the travel time of the shear wave. The study reveals that as compared to the S-wave, it is more reliable to depend on the arrival times’ measurement for the P-wave.     

On the use of microtremor recordings in seismic microzonation

Experimental methods involving microtremor recordings are useful for determining site effects in regions of moderate seismic activity where ground motion records are few, and in urban or industrial contexts where the noise level is high. The aim of this study is to establish a microzonation by using the Nogoshi–Nakamura method,[1, 2] a simple experimental technique based on microtremor recordings. Since the physical phenomena underlying the method are only partially understood, the spectral responses obtained cannot be used alone. We, therefore, complete our experimental results by comparing them with the solutions of a one-dimensional numerical simulation (SHAKE91).[3, 4] The experimental programme was carried out on a plain near the Rhone Delta (South of France). H/V spectral ratios were calculated at 137 noise measurement points. In addition, we were able to compute the numerical transfer functions from soil columns defined by geotechnical characteristics inside the studied region. A comparison of the results obtained by the experimental and numerical methods showed that the fundamental frequencies are in good agreement, but that the amplitudes obtained by the two techniques are sometimes different. The analysis of H/V spectral ratios enabled us to establish maps to characterize the region: a resonance frequency map and maps of amplification levels as a function of frequency range, leading to a seismic microzonation for the whole of the region.     

Spatial controls on the distribution and dynamics of a marginal snowpack in the Australian Alps

Seasonal snowpacks in marginal snow environments are typically warm and nearly isothermal, exhibiting high inter‐ and intra‐annual variability. Measurements of snow depth and snow water equivalent were made across a small subalpine catchment in the Australian Alps over two snow seasons in order to investigate the extent and implications of snowpack spatial variability in this marginal setting. The distribution and dynamics of the snowpack were found to be influenced by upwind terrain, vegetation, solar radiation, and slope. The role of upwind vegetation was quantified using a novel parameter based on gridded vegetation height. The elevation range of the catchment was relatively modest (185 m), and elevation impacted distribution but not dynamics. Two characteristic features of marginal snowpack behaviour are presented. Firstly, the evolution of the snowpack is described in terms of a relatively unstable accumulation state and a highly stable ablation state, as revealed by temporal variations in the mean and standard deviation of snow water equivalent. Secondly, the validity of partitioning the snow season into distinct accumulation and ablation phases is shown to be compromised in such a setting. Snow at the most marginal locations may undergo complete melt several times during a season and, even where snow cover is more persistent, ablation processes begin to have an effect on the distribution of the snowpack early in the season. Our results are consistent with previous research showing that individual point measurements are unable to fully represent the variability in the snowpack across a catchment, and we show that recognising and addressing this variability are particularly important for studies in marginal snow environments.     

Modeling coseismic displacements resulting from SAR interferometry and GPS measurements during the 1997 Umbria-Marche seismic sequence

In this study we analyse coseismic GPS displacements and DInSAR data to constrain a dislocation model for the three largest earthquakes of the 1997 Umbria-Marche seismic sequence. The first two events, which occurred on September 26 at 00:33 GMT (Mw 5.7) and 09:40 GMT (Mw 6.0) respectively, are investigated using both GPS displacements and DInSAR interferograms. We discuss and compare the results of previous studies which separately modeled a smaller subset of geodetic data. We provide a dislocation model for these two earthquakes which fits well both GPS and DInSAR data and agrees with the results of seismological and geological investigations. The first event consists of a unilateral rupture towards the southeast with a uniform dislocation. The strike, rake and dip angles are those resulting from the CMT solution. The second event consists of an unilateral rupture towards the northwest and a variable slip distribution on the fault plane. The strike and the rake are consistent with the CMT solution, but the dip angle has been slightly modified to improve the simultaneous fit of GPS and DInSAR data. While the second rupture (09:40 GMT) arrived very close to the surface, the fit to geodetic data shows that the first rupture (00:33 GMT) is deeper (2 km), despite the more evident surface geological effects. The analysis of new SAR interferograms allows the identification of a 5–6 cm additional displacement caused by the October 3 (Mw 5.2) and 6 (Mw 5.4) seismic events.We use data from a new DInSAR interferogram to model the displacement field of the Sellano earthquake of October 14, 1997. For this event significant GPS measurements were not available. We tested two different fault plane geometries: a blind, planar fault (top depth = 2.4 km), and a curved (listric) fault reaching the surface. The two models provide a generally similar fit to the data, and show that most of the slip was released at depths greater than 2.4 km along a gently dipping (40^°–45^°) fault surface. They also show that a unilateral rupture does not allow fitting the interferometric fringes since there is evident surface deformation to the northwest of the hypocenter. Moreover, we suggest that the concentration of high residuals in the southern part of our uniform slip model may in fact indicate a certain slip variability in this area.We conclude that, despite the moderate magnitudes and the lack of significant surface faulting, the space geodetic data allowed to constrain dislocation models giving new insights in the rupture process of the three largest events of the sequence.     

Evaluation of wind effects on a supertall building based on full‐scale measurements

This paper describes the results obtained from the full‐scale measurements of wind effects on a 70‐storey building in Hong Kong. The building which has a height of approximately 370 m is the second tallest structure in Hong Kong. The field data such as wind speed, wind direction and wind‐induced acceleration responses have been measured since 1995 including the close passage of two typhoons; typhoon Sally and typhoon Kent. Detailed analysis of the field data is conducted. The full‐scale measurements are compared with the wind tunnel results obtained in the Boundary Layer Wind Tunnel Laboratory at Western Ontario University. The amplitude‐dependent characteristics of damping and natural frequency that were obtained by using the random decrement technique are investigated. Copyright © 2000 John Wiley & Sons, Ltd.     

钻孔应变,应力测量区域特征初探

我国钻孔应变、应力测量依不同时段区域变化形态有明显差异;短期(一月内)、中期(一年内)区域变化特征不显著。正常形态显示平稳、应变测量显示固体潮形态、应力测量显示年变形态。震前异常多呈现突升、突降式的应变阶跃、固体潮畸变、年变形态改变。长期(10年内)与其构造部位、地震活动性及区域构造运动,矢量速率有一定的相关性,因而存在着明显的区域变化特征。识别不同区域的曲线变化特征,对判定震兆信息有一定的指导作用,从而提高了应变、应力测量资料的应用价值。     

A method of searching for radial velocity anomalies in the lower mantle using interfering signals

Radial velocity anomalies in the lower mantle that give rise to triplications in the travel-time curve for short-periodP waves will produce arrivals havingdT/d values that differe by roughly 0.2–0.5 s/deg. The first two arrivals associated with such triplications will be separated by less than one second over a distance range of 4°–10° they may not, therefore, be separable visually on single seismograms, so that their presence can only be inferred from some measurable property that depends on their mutual interference. If there are lateral variations in the regions of anomalous velocity gradients, the interfering signals will also have different azimuths of arrival. Using two synthetic wavelets we have investigated the effect of interference on bothdT/d and azimuth measurements at the Yellowknife Array. We found that if the interfering pulses have a dominant frequencyv, there is a range of time separations (0.30/v0.55/v) over which the measureddT/d and azimuth values may fluctuate by much more than the differences indT/d and azimuth between the interfering signals. We have evaluated the following empirically defined functions for three different primary signals, and for three different relative amplitudes of the interfering signals:f (t), the drift function, which expresses how the measured slownesses,p, and azimuths, , differ from the slownesses and azimuths of the primary wavelets; f(), the range function, which describes the behaviour of the upper and lower bounds ofp and as a function of the difference in arrival times of the signals, andf , studied the properties of these functions, and have outlined how these properties provide criteria based on the numerical and statistical characteristics of the arrival vectors, and on the waveform of the signal that will enable small radial velocity anomalies to be more clearly delineated.Contribution No. 863 from the Earth Physics Branch.