用铀系定年法测定南永1井珊瑚礁年龄

运用铀系定年法首次对南水1井珊瑚礁岩心中的两个层位进行测年,结果与~(14)C测年一致,证实在晚更新世与全新世之间存在沉积间断面。     

海洋沉积样品~(14)C测年差异来源及其结果解释

~(14)C测年已为海洋研究工作广泛应用,但由于时有不合理取样或在运用数据时没有充分考虑各种海洋环境和动力因素,因而产生无法使用数据作合理解释的现象。本文试从海洋样品本身和海洋各种营力作用分析各种数据差异的来源,认为海洋环境特别是海岸带环境的复杂性是造成海洋样品~(14)C测年数据差异的主要原因,它可能影响样品的代表性或使数据解释时得出错误结论.并指出在运用年代结果时一定要充分考虑地质地理和各种营力作用因素。     

石盐的36Cl断代法

讨论了~936)Cl的成因、~(36)Cl断代法的原理及测试方法。自1987年以来,应用该方法测得柴达木盆地尕斯库勒湖和大浪滩湖石盐的沉积年龄,并与~(14)C,~(230)Th和古地磁测年法所测得的年龄数据进行对比,结果均在误差(1δ)范围内相吻合,表明石盐的~(36)Cl断代法是可行的,获得的年龄数据是可靠的。     

珠江口河流输沙、河口沉积与粒度信息之间的联系

河口三角洲地区泥沙供应充分，是现代沉积速率较高的区域。快速沉积的泥沙包含高分辨率的环境信息。采用放射性同位素测年方法研究了珠江口伶仃洋大铲湾海域6个柱样的现代沉积速率，以2mm的间隔分析了其中2个柱样上部的粒度，并对其平均粒径和珠江流域的年输沙量进行了快速傅里叶变换，以期获取河流泥沙供应、河口沉积速率和沉积物垂向粒度变化的对应关系。结果表明，大铲湾海域的沉积速率为1～3cm／a，受动力条件和泥沙供应条件的影响显著。2个柱样的平均粒径的最显著重现周期与珠江年输沙量的周期性有较好的对应关系，并可能反映了季节的、年的和多年的沉积速率信息。对于每年沉积厚度在厘米级的环境，以毫米级的高分辨率进行粒度分析，有可能揭示出沉积物供应的季节变化和年际变化。本研究亦可为其他河口的相关工作提供借鉴。     

应用六氯化苯测年法对厦门港现代沉积速率的测定

岩芯柱样用静力岩芯采样器于1986年采自福建省厦门港一九龙江口海域。通过对这些岩芯柱样中六氯化苯(BHC)的垂直分布状况和生物扰动类型的分析,应用 S_R=D_(BHC-D_(mix)/Y的计算模式,获得了这些岩芯的现代沉积速率数据。将这些数据、方法与原理完全不同的~(210)Pb放射性同位素测年法同岩芯测年数据比较,其结果在数据和数量级上有一定可比性。初步认为,再经进一步探索和改进,BHC测年法有可能应用于近岸河口港湾几十年来现代沉积速率的测定而与其它测年法互为补充。     

Pb and other ore metals in modern seafloor tectonic environments: Evidence from melt inclusions

Many modern seafloor tectonic environments are host to hydrothermal systems and associated polymetallic sulfide deposits. Metal transport and precipitation are controlled by magmatic processes such as pre-eruptive degassing and the hydrothermal cycle. The original availability of Pb and other ore metals in a given setting is dependent on concentrations in the original magmatic source or additional enrichment processes. We have examined the Pb budget of melt inclusions from nine modern seafloor settings representing back-arcs, mid-ocean ridges and seamounts. Melt inclusions provide information on the characteristics of parental magmas, including insights into metal budgets. Trace element data in melt inclusions hosted in plagioclase, olivine and pyroxene were obtained by laser-ablation inductively-coupled mass-spectrometry.Results from back-arcs emphasize the impact of slab-subduction and dehydration processes on the chemical characteristics of generated magmas. Volatile- and fluid-mobile element-rich melt inclusions at Manus basin and Okinawa trough reflect a robust contribution of elements from the subducting slab as evidenced by relatively low Ce/Pb ratios. At Bransfield strait, on the other hand, melt inclusions are volatile poor, and fluid-mobile element ratios are similar to mid-ocean ridge values indicating little or no contribution from the slab. High Cu concentrations at Manus basin and Okinawa trough can be explained by fluxing of ferric iron from the subducting slab benefiting the production of sulfate over sulfide.Metal budgets for seamounts located on and nearby the axis of mid-ocean ridge segments appear to be independent of any input of mantle plume material. Results from the southern Explorer ridge (strong lower mantle influence, transitional- and enriched-MORBs), Pito and Axial seamounts (moderate lower mantle influence, transitional-MORBs) and a Foundation near-ridge seamount (little to no mantle influence, normal-MORB) show that, despite similar tectonic environments and varying contributions of mantle plume material, Cu, Zn and Pb values do not vary significantly between the enriched and non-enriched magma components of a given setting.     

<Superscript>40</Superscript>Ar-<Superscript>39</Superscript>Ar dating of lamprophyre dykes in the Baimazhai nickel deposit,Yunnan Province,China, and its geological significance

The Baimazhai nickel deposit, Yunnan Province, China, is located in the southern part of the Sanjiang （Tri-river） alkali-rich intrusive rock belt （Sanjiang ARIR）. In this paper was conducted ^40Ar-^39Ar dating of two phlogopites in lamprophyres which are, as dikes, widely distributed in the orefield, and two plateau ages were acquired, i.e., 32.46±0.62 Ma and 32.01±0.60 Ma, respectively （averaging 32.23±0.60 Ma）. The ages are obviously younger than those of the ore-hosted complex and mineralization of the Baimazhai nickel deposit. In combination with the characteristics, it is indicated that lamprophyres in the orefield and those in the Sanjiang ARIR are similar in tectonic setting, mineral assemblage and geochemistry. It is considered that lamprophyres in the orefield are the important component of the Sanjiang ARIR, and the lamprophyres and ore-hosted complex in the orefield represent the products of two times of different magmatic activity from different mantle sources. On the other hand, the age of lamprophyres in the orefield is older than that of the strike-slip shearing of the Ailaoshan-Honghe fault belt, suggesting that the strike-slip shearing of the Ailaoshan-Honghe fault belt is not the factor leading to magmatic activity of lamprophyres in the orefield, while it is more possible that magmatic activity of the Sanjiang ARIR promoted strike-slip shearing of the fault belt.     

Mesozoic-Cenozoic tectonics and geodynamics of Altai, Tien Shan, and Northern Kazakhstan, from apatite fission-track data

Apatite fission-track (AFT) thermochronological modeling as a diagnostic tool for periods of stability (peneplanation) and tectonic activity (orogeny) has been broadly used in tectonic studies of Central Asia in recent years. We discuss more than 100 AFT ages of samples from the Kyrgyz Tien Shan and Altai and compare them with AFT data from northern Kazakhstan. Geological, geomorphological, and AFT data indicate intense activity in the Late Cenozoic Eurasian continental interior. The impact from the India-Eurasia collision on the northern Tien Shan, Altai, and northern Kazakhstan regions showed up at 11, 5, and 3 Ma, respectively, as a result of stress propagation into the continent, with the ensuing reactivation and mountain growth. We hypothesize that a distant effect of the Late Cenozoic India-Eurasia collision was to rejuvenate Paleozoic fault zones and to deform the Mesozoic sedimentary cover north of the collision front as far as the West Siberian Plate. The reactivation facilitated formation of tectonic oil and gas traps. The activity in northern Central Asia under the effect of the Indian indentation into Eurasia appears to continue and may evolve to include uplift of southern West Siberian plate with uplift.     

Laser probe Ar/Ar dating: History and development from a technical perspective

The ⁴⁰Ar/³⁹Ar method using a laser probe opened the door to microscale measurements and diffusion profiles frozen in samples. In the first decade since the initial application of a laser for ⁴⁰Ar/³⁹Ar dating in 1973, practical applications have been few. This is due not only to the fact that the laser and vacuum technologies were immature but that mass spectrometry was also in its infancy. In those days, the sensitivity of a mass spectrometer was generally insufficient to measure the small amount of argon degassed from a geological sample by a laser. These problems have subsequently been solved by new technologies. To understand their current status, a brief history of their development is outlined. This outline focuses on the required detection limit in micro scale measurement, practical approaches for accurate measurement are explained through examples in our laboratory specifically relating to the technical aspects of ⁴⁰Ar/³⁹Ar dating.     

U-Pb Age Determination for Seven Standard Zircons using Inductively Coupled Plasma–Mass Spectrometry Coupled with Frequency Quintupled Nd-YAG (λ = 213 nm) Laser Ablation System: Comparison with LA-ICP-MS Zircon Analyses with a NIST Glass Reference Material

This paper evaluates the analytical precision, accuracy and long‐term reliability of the U‐Pb age data obtained using inductively coupled plasma–mass spectrometry (ICP‐MS) with a frequency quintupled Nd‐YAG (λ = 213nm) laser ablation system. The U‐Pb age data for seven standard zircons of various ages, from 28 Ma to 2400 Ma (FCT, SL13, 91500, AS3, FC1, QGNG and PMA7) were obtained with an ablation pit size of 30 μm diameter. For ²⁰⁷Pb/²⁰⁶Pb ratio measurement, the mean isotopic ratio obtained on National Institute of Standards and Technology (NIST) SRM610 over 4 months was 0.9105 ± 0.0014 (n = 280, 95% confidence), which agrees well with the published value of 0.9096. The time‐profile of Pb/U ratios during single spot ablation showed no significant difference in shape from NIST SRM610 and 91500 zircon standards. These results encouraged the use of the glass standard as a calibration standard for the Pb/U ratio determination for zircons with shorter wavelength (λ = 213 nm) laser ablation. But ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages obtained by this method for seven zircon standards are systematically younger than the published U‐Pb ages obtained by both isotope dilution–thermal ionization mass spectrometry (ID‐TIMS) and sensitive high‐resolution ion‐microprobe (SHRIMP). Greater discrepancies (3–4% younger ages) were found for the ²⁰⁶Pb/²³⁸U ages for SL13, AS3 and 91500 zircons. The origin of the differences could be heterogeneity in Pb/U ratio on SRM610 between the different disks, but a matrix effect accuracy either in the ICP ion source or in the ablation‐transport processes of the sample aerosols cannot be neglected. When the ²⁰⁶Pb/²³⁸U (= 0.2302) newly defined in the present study is used, the measured ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages for the seven zircon standards are in good agreement with those from ID‐TIMS and SHRIMP within ±2%. This suggests that SRM610 glass standard is suitable for ICP‐MS with laser ablation sampling (LA‐ICP‐MS) zircon analysis, but it is necessary to determine the correction factor for ²⁰⁶Pb/²³⁸U by measuring several zircon standards in individual laboratories.