Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.     

2020年新疆于田Ms6.4地震前热红外亮温异常研究

获取了2020年4-7月新疆于田Ms6.4地震区周边约400 km范围内连续的中国气象卫星FY-2G遥感热红外资料,选取北京时间凌晨1:00～5:00时的分钟值数据,经过小波变换和功率谱估计法进行处理,得到研究区地震前后相对功率谱异常演化过程,对比分析了 2019年相同频率同期的相对功率谱幅值,并讨论了异常时间演化过程...     

2022年1月8日门源6.9级地震山东地震台网测定面波震级对比分析

通过对山东地震台网记录的2022年1月8日门源M_S 6.9地震原始波形进行分析,测算出88个测震台站的M_S、M_S7、M₍S(BB))等3种面波震级,并与中国地震台网速报和青海区域地震台网编目测定结果进行对比分析。结果表明：①山东地震台网测定门源M_S 6.9地震的面波震级M_S、M_S7、M₍S(BB))分别为7.20、7.16、6.96;②M₍S(BB))震级的测定方法简单,不同台站之间的偏差较小,一致性较好,适合在地震台网的地震速报中使用。这与震级国家标准GB 17740—2017的规定相一致。     

2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析

2017年精河M_S6.6地震震前,尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化,经现场落实确认,异常是可靠的。根据这3个台的记录资料计算相对应变的变化,结果表明,地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现,相对应变场异常期间主方向与震源机制解P轴方位较为一致。     

基于MS60的BIM放样与施工结果精度分析

随着各种异形建筑的不断出现,传统施工放样方法及检测技术已不能完全满足施工要求,因此需要引进新的施工放样及检测技术。本文结合重庆仙桃数据谷金融大楼项目,运用MS60的BIM放样与三维激光扫描技术,探究其在异形建筑施工放样及结果检测中的高效性、可靠性。在施工放样过程中,首先通过在BIM模型上选取放样点,利用MS60全站扫描仪自动搜索与追踪,简化施工放样流程;然后运用BIM模型与点云数据相结合的表面偏差分析对施工结果进行高精度分析,从而为后续施工提供参考。     

内蒙古中东部上侏罗统满克头鄂博组划分及时代

内蒙古自治区中东部满克头鄂博组以流纹质火山碎屑岩为主夹山间湖盆相陆相碎屑岩及少量流纹岩或英安岩.沉积岩中产叶肢介Magumbonia paramecia,Nestoria reticulate,N.xishunjingensis,N.cf.pissoui,Lioestheria sp.;双壳类Ferganoconcha...     

与澜沧大震可能相关的震磁效应——小波分析一例

用小波法分析了与1988年澜沧大震相关的通海台地磁Z分量资料。小波分析结果显示地震前“日变幅差”ΔTg(24)存在可能的异常变化;异常为正异常,异常幅度很大,异常结束后立即发生了地震。     

一种由粗到精的地面激光点云多层级配准方法

提出了一种综合利用快速点特征直方图(FPFH)描述符和同名点引导ICP优化的地面激光扫描(TLS)点云配准方法。该方法包括3个步骤:1)点云金字塔构建;2)基于FPFH的粗配准;3)同名点引导的ICP精配准。首先使用体素网格滤波器构造点云的金字塔结构,在粗配准时,FPFH描述符用于金字塔顶层上点云的鲁棒匹配,在此基础上,再进行两层级同名点引导的ICP精配准优化,使用3组典型TLS点云对进行实验,结果表明本文方法可以高效地完成TLS点云的配准。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

广西苍梧贺街-夏郢断裂遥感影像和小震分布

采用遥感影像解译、小震精定位等方法,结合野外地震地质调查,分析了贺街-夏郢断裂附近的遥感影像特征和小震分布特征,并据此将贺街-夏郢断裂从南到北分为南段(夏郢镇毓秀-石桥镇新塘)、中段(石桥镇新塘-步头镇白石口)、北段(步头镇白石口以北).结果显示,贺街-夏郢断裂中段卫星影像上线性特征明显,控制石桥-沙头盆地的发育,局部...