Petrofacies, provenance and diagenesis of the dhosa sandstone member (Chari Formation) at Ler, Kachchh sub-basin, Western India

The sandstones of the Dhosa Sandstone Member of Late Callovian and Early Oxfordian age exposed at Ler have been analyzed for their petrofacies, provenance, tectonic setting and diagenetic history. These sandstones are fine to medium grained and poorly- to well sorted. The constituent mineral grains are subangular to subrounded. These sandstones were derived from a mixed provenance including granites, granite–gneisses, low- and high-grade metamorphic and some basic rocks of the Aravalli Range and Nagarparkar Massif. The petrofacies analysis reveals that these sandstones belong to the continental block-, recycled orogen- and rifted continental margin tectonic regime.The imprints of early and deep burial diagenesis of these sandstones include different stages of compaction, cementation, change in crystal boundaries, cement–cement boundaries, chertification and neomorphism. The sequence of cementation includes precipitation of calcite and its subsequent replacement by Fe calcite and silica cements. The typical intermediate burial (2–3 km depth) diagenetic signatures of these sandstones are reflected in the formation of suture and straight-line boundaries, and triple junctions with straight-line boundaries. The depositional environment, relatively low-energy environment that was below storm wave base but subjected to gentle currents, of the Dhosa Sandstone Member controlled the early diagenesis, which in turn influenced the burial diagenesis of these sandstones.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Preliminary evaluation of hydrochemistry of the Kalambaina Formation, Sokoto Basin, Nigeria

Hydrochemical investigations in the Kalambaina Formation have been initiated to determine potability and suitability of the shallow groundwater for domestic and agricultural uses. This limestone formation is an extensive aquifer supplying water to livestock and domestic wells in its outcrop areas. The aquifer is recharged by rainfall and discharges mainly into the Sokoto–Rima River system and lakes at Kware, Gwadabawa and Kalmalo in Nigeria. Because recharge to the aquifer is mainly from rainfall, the quality of the groundwater is controlled essentially by chemical processes in the vadose zone and locally by human activities. Water samples were taken at 11 sites comprising boreholes, dug wells and a spring and were chemically analysed for their major ion components. Hydrochemical results show water of fairly good quality. It is, however, hard and generally of moderate dissolved solids content. Concentration of the total dissolved solids is between 130 and 2,340 mg/l. Concentrations of ions vary widely but a high concentration of K⁺ is found in places. NO₃⁻ is on the higher side of the World Health Organization (WHO) permissible limits, indicating pollution in such areas. Groundwater chemistry is predominantly of two facies, namely the calcium–magnesium–bicarbonate and calcium–magnesium–sulphate–chloride facies. These facies probably evolved primarily as a result of dissolution of calcium and magnesium carbonates as well as some human/land-use activities.     

Weathering characteristics of arctic islands in northern Norway

The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.¹⁰Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen.     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

A highlight of environmental and engineering geology in Fargo, North Dakota, USA

Several unfavorable environmental and engineering geologic conditions exist in Fargo, North Dakota. Dominantly, the behavior of smectitic clays within the proglacial Lake Agassiz sediments of the Sherack and Brenna Formations creates subsoil instability beneath engineered structures in the Fargo area and slope instability within cutbank meanders of the Red River of the North. Unfavorable engineering geologic conditions encountered include: the elastic deformation of clayey glaciolacustrine soils, shrink-swell properties, inadequate bearing capacities, and mass movements. These conditions are responsible for structural failures including the Fargo Grain Elevator in 1955 and the Northern Pacific railroad grade. Bank failures along the Red River are common due to the inherent instability of Brenna Formation smectitic clays which are subject to plastic deformation in the subsurface, with resultant block failure of overlying Sherack Formation. Recent alluvial sediments due to typical fluvial action and the continued seasonal saturation of cutbank meanders within the floodplain also add to soil instability.     

吉林伊通盆地莫里青断陷古近系双阳组储集层成岩作用研究

古近系双阳组是在吉林省伊通盆地莫里青断陷中，油气赋存的主要层位,储层主要为湖底扇和扇三角洲的砂体。依据双阳组储层的大量薄片、扫描电镜、粘土矿物分析的资料研究了该储集层的成岩作用。研究结果表明双阳组储集层：成岩作用经历了压实、压溶、胶结、交代和溶解6方面的作用。双储集层中的自生粘土矿物蒙皂石向伊利石转化具有明显的特征：主要演化过程经历了蒙皂石渐变带，第一迅速转化带和第二迅速转化带，相应的成岩作用阶段可划分为早成岩阶段B期、晚成岩阶段A1期和晚成岩阶段A2期。依据在垂向上的成岩变化,建立了莫里青断陷双阳组储集层的成岩作用演化序列。在垂向上成岩作用的类型和强度均存在明显的差异，造成了储层物性的垂向分带。     

桂北地区早石炭世杜内期的长身贝类的发现及其生物古地理意义

在广西北部兴安县高尚镇金子山剖面下石炭统鹿寨组底部，新发现了长身贝类腕足化石，包括1新种、1个相似种、6个未定种和2个属种未定类型。这些长身贝类以Productellidae和Productidae科的分子为主，另有少量Echinoconchidae和Monticuliferidae科的分子。这些长身贝类全部属于生活在静水环境中的薄壳类型，无一与华南同期地层中已知类型相同。它们之间的差异可能反映了不同沉积环境条件对腕足动物群属种的控制。在鹿寨组底部发现的长身贝类以及近年在桂林南边村和黔南睦化剖面腕足动物群的发现显示出华南台缘斜坡―盆地相区杜内阶中的腕足动物群具有极高的属种分异度，不但有大量见于世界其他地方同期动物群中的分子，也包含有不少原本认为只在维宪阶或更高层位出现的类型或全新的类型，说明华南台缘斜坡―盆地相区不但与世界其他地区的腕足动物群之间存在密切的生物地理区系联系，而且华南台缘斜坡―盆地相区是杜内期腕足动物起源和辐射演化的重要策源地之一。许多属种可能是在这里起源，并迁移扩散到其他地方。     

福建省大田县广平含煤区推覆构造特征及找煤预测

通过对区内推覆构造及地层等的研究，认为广平含煤区推覆体下蕴藏着丰富的煤炭资源，童子岩组煤系地层埋藏深度主要受发育于童子岩组上部的F1、F2推覆断层控制，并圈定出煤炭资源预测前景较好的3个区作为煤炭勘查后备基地。     

裂缝性岩石裂缝扩展的光弹构造物理模拟——以南华北盆地户部寨沙河阶组为例

以南华北盆地户部寨第三系沙河阶组粉砂岩低渗透储层为例,总结了其中发育的5种类型构造裂缝组合,即:①南北向雁形张节理组成的共轭剪节理带;②东西向雁形张节理组成的共轭剪节理带;③缠结状多组剪切构造裂缝;④组合状交切的多组剪切构造裂缝及张裂缝;⑤散状无序排列的构造裂缝。在此基础上,建立光弹性试验构造物理模型,沿现应力场96°方向,均匀地对该模型逐步增加外载力。结果表明,沿各组合裂缝尖端分别形成对称于裂缝走向、且主轴垂直于裂缝的Ⅰ型等色线条纹;对称于裂缝走向、且主轴平行于裂缝走向的Ⅱ型条纹和斜交于裂缝走向的复合型(Ⅲ型)条纹。第①类组合裂缝尖端以Ⅰ型等色线条纹的拉张应力和张剪应力为主;第②类组合裂缝尖端以复合型(Ⅲ型)等色线条纹的挤压应力为主;第③、④和⑤类组合裂缝尖端的应力分布较为复杂。当模型外载荷接近1000kg时,裂缝尖端起裂,并开始发育显微裂缝,而当外载荷达1100-1200 kg时,沿裂缝尖端部位形成宏观裂缝,并开始扩展。5种类型的裂缝组合扩展发育程度由强至弱依次为:①,③,⑤,②,④。其中第①类共轭裂缝组合起裂最早,扩展最快,裂缝间的连通趋势最好,说明规则分布的构造裂缝组合,在垂直于外施加载衙时更易达到连通的目的。