A new approach for the development and management of brackish karst springs

A new approach to the method of artificial upraising of the water outlet point, for management and development of brackish karst springs, uses the MODKARST model. Brackish karst springs simulation can be used to estimate the necessary upraising of the spring elevation, so that sea-water intrusion is blocked. The consequent freshwater loss to the sea, due to this upraising, can also be estimated. The method has been applied to the periodically brackish karst Almiros spring at Heraklion of Crete, Greece. The spring simulation showed that the sea-water intrusion could be prevented through an artificial upraising of the water-outlet point, realized by the construction of a dam. The exact upraising has been estimated. Freshwater loss to the sea because of this upraising has also been estimated. The model could also be used as a tool for the management of the spring. For example, it was used to assess management options for the spring during the depletion period of the year 1994. The best scenario for the development of the spring during this period has been estimated.     

Quantification of karst aquifer discharge components during storm events through end-member mixing analysis using natural chemistry and stable isotopes as tracers

Karst aquifer components that contribute to the discharge of a water supply well in the Classical Karst (Kras) region (Italy/Slovenia) were quantitatively estimated during storm events. Results show that water released from storage within the epikarst may comprise as much as two-thirds of conduit flow in a karst aquifer following rainfall. Principal components analysis (PCA) and end-member mixing analysis (EMMA) were performed using major ion chemistry and the stable isotopes of water (δ¹⁸O, δ²H) and of dissolved inorganic carbon (δ¹³C_DIC) to estimate mixing proportions among three sources: (1) allogenic river recharge, (2) autogenic recharge, and (3) an anthropogenic component stored within the epikarst. The sinking river most influences the chemical composition of the water-supply well under low-flow conditions; however, this proportion changes rapidly during recharge events. Autogenic recharge water, released from shallow storage in the epikarst, displaces the river water and is observed at the well within hours after the onset of precipitation. The autogenic recharge end member is the second largest component of the well chemistry, and its contribution increases with higher flow. An anthropogenic component derived from epikarstic storage also impacts the well under conditions of elevated hydraulic head, accounting for the majority of the chemical response at the well during the wettest conditions.     

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

新近沉积粉细砂层地基的试验与评价

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

Dynamics and interaction of organic carbon, turbidity and bacteria in a karst aquifer system

The dynamics of organic carbon (OC), turbidity, faecal indicator bacteria and physicochemical parameters was studied in a karst system near Yverdon, Switzerland. Online measurements and sampling were done at a swallow hole draining an agricultural surface (the input), and two groups of springs (the outputs) that often show bacterial contamination. A fluorescent tracer that was injected into the swallow hole during low-flow conditions first arrived at the springs 10–12 days after injection; the total recovery rate was 29%. Previous tracer tests during high-flow conditions gave shorter travel times. After a major rainfall event, a primary turbidity peak was observed at the springs. It coincides with the rising limb of the hydrograph, indicating remobilisation of autochthonous particles from the aquifer. A secondary turbidity peak occurs several days later, suggesting the arrival of allochthonous particles from the swallow hole. Wider peaks of OC and bacteria were observed simultaneously. Applying methods from molecular microbiology (PCR-DGGE) allowed characterisation of the bacterial communities at the swallow hole and the springs. The results demonstrate that the swallow hole is an important source of groundwater contamination, while its contribution to aquifer recharge is insignificant. OC appears to be a better indicator for bacterial contamination than turbidity.     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

德国岩溶水勘查技术与开发利用

本文介绍德国南部岩溶区的自然地理地质概况、水文地质特征,引入关于岩溶水文地质垂向分带的概念模型。着重评述多电极地电探测、地面穿透雷达、地面核磁共振三种先进的地球物理探测方法。对德国岩溶水开发方式及保护措施进行具体分析,介绍了德国民众对地下水、矿泉水的认识。最后,将德国岩溶水勘查技术与国内现状对比评价,明确应当学习和引进先进技术的思路。     

燕山水库坝基防渗墙优化设计

因现场资料不足或分析手段落后等原因,当前进行水库坝基防渗墙设计,往往存在过于保守的倾向。以河南省燕山水库为例,基于优化设计的思路,采用目前较为成熟的二维有限单元法,对不同防渗条件下的坝基渗流场分别进行了模拟,并将计算所得比降、流量与允许比降、允许流量做了对比,从定量的角度提出了既安全、又经济的防渗方案:防渗墙厚度取0.8m,深度取打入破碎带5m。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中