库鲁克塔格地区古元古界磁铁石英岩型铁矿的发现及找矿意义

通过塔里木地台北缘找矿研究,在库鲁克塔格地区首次发现磁铁石英岩型铁矿床,铁矿赋存于前寒武系兴地塔格群沙依提组地层中。对该矿床含矿岩系特征、岩矿石化学组成、微量元素、稀土元素组成与矿床地质特征的调查与研究表明,鲁克塔格地区古元古界兴地塔格群沙依提组含铁石英岩主要分布于兴地河—辛格尔一带,含铁建造呈东西向展布。在兴地河-辛格尔地区发现含铁石英岩建造出露长约160km,找矿前景可观。     

煤矿区地质灾害对新农村建设的影响

河南省煤炭资源丰富,分布于六大煤矿区,主要煤矿119个。煤矿区地质灾害主要有地面塌陷、地裂缝、崩塌、滑坡、不稳定斜坡等。各类灾害造成居民住房、学校、道路、水利、电力等设施和土地资源的破坏。煤矿区地质灾害已成为阻碍农村经济持续发展的重要因素。在论述煤矿区地质灾害对新农村建设影响的基础上,初步制定地质灾害防治措施,提出煤矿塌陷区新农村建设中村庄选址对策。     

吉林辽源市矿山地质环境问题及对策建议

辽源市是我国典型的矿业城市,具有悠久的矿业开发历史,煤炭为主要矿产资源集中分布于市区,近50年来的开采遗留下大量的矿山地质环境问题。本文在资料收集和调查的基础上,分析总结了吉林辽源市矿山环境地质问题及其危害,提出辽源市矿山地质环境保护与综合治理对策建议,为资源枯竭城市转型,提供了基础数据和技术支撑。     

沂水县杏山官庄铁矿地质特征

在汞丹山凸起中分布的基性一超基性岩体,其磁铁矿含量高者可构成矿体。利用高精度磁测、钻探等方法开展了沂水县杏山官庄铁矿的普查工作,大致查明了该矿体的规模、形态和产状,认为该矿床具有低品位、工程地质条件简单的特点,综合分析矿床成因属岩浆分异型磁铁矿矿床。     

内蒙古自治区翁牛特旗姚家店铅锌矿地质特征

内蒙古自治区翁牛特旗姚家店铅锌矿矿床为一受NW向断裂带构造控制的中低温岩浆热液充填交代型铅锌矿床,形成于燕山晚期,矿体呈脉状产于二叠世额里图组安山质凝灰岩之构造破碎带内,形态产状严格受断裂构造控制。矿石为硅化、黄铁矿化碎裂岩型铅锌矿石。     

济宁市露天矿山开采现状及保护治理措施

根据济宁市露天矿山开发利用现状,以及矿山开采引发的环境地质问题,按照资源开发与环境保护相协调的原则,对其进行了现状评估,同时,结合济宁实际情况,针对新建矿山、生产矿山和闭坑矿山,提出相应的矿山地质环境保护与恢复治理措施。     

沂源煤田鲁村井田山西组层位的发现及其地质意义

通过采用地面物探、钻探和井下巷探、钻探相结合的综合勘探方法,对鲁村井田深部进行了补充勘探,并对井田以往地质资料进行了重新对比分析,发现该井田-400～-1 300 m的埋深范围内不但存在以往认为已被剥蚀缺失的太原组上部地层,还保存了较完整的山西组,尤其是在该段地层中新发现了5个局部可采煤层,为井田增加了资源储量、延长了服务年限。填补了沂源煤田太原组上部和山西组含煤地层资料的空白。     

济宁岩群大量变质碎屑岩和碳质岩的发现及地层划分

在详细研究济宁市颜店铁矿区报告和以往资料的基础上,对济宁颜店铁矿部分钻孔济宁岩群的岩矿心进行了编录和系统取样工作,发现济宁岩群存在大量变碎屑岩和首次在钻孔中辨别出碳质岩,这对济宁岩群地层的研究和铁矿成矿作用的研究都提供了重要最新资料。对于铁矿的成因研究和原岩及沉积环境的恢复都有重大的意义。依据岩石组合特征和含矿性,济宁岩群自下而上可划分为翟村组、颜店组和洪福寺组。     

单县煤田张集井田地质特征与成煤环境分析

区域性张性断裂把鲁西地区分割成凸起、凹陷相间排列的构造格局,控制着该区含煤地层及煤炭资源的分布。山东省单县煤田张集井田位于青崮集凸起（潜）北侧,单县断层以南,含煤地层盖层为第四系、新近系和古近系,厚度约500～700 m,沉积基底为奥陶系,含煤地层为石炭-二叠纪月门沟群,其中山西组是该区最重要的含煤地层。石炭-二叠纪是海相到陆相的过渡时期,在古气候、古环境和古构造的共同作用下,形成了煤层;同时,该区所处的特殊构造位置为煤层的保存提供了有利条件。     

Application of Chlorite Geothermometry to Hydrothermal Alteration in Toyoha Geothermal System, Southwestern Hokkaido, Japan

In this study, we applied chemical geothermometers to the estimation of formation temperatures of chlorites from various types of hydrothermally altered rocks in the Toyoha geothermal field, using core samples from six drill holes (TH-2 to TH-7) together with wasted ore samples from Toyoha vein-type ore deposit. Based on the preliminary examination of mineral assemblages by X-ray powder diffraction and optical microscopy, hydrothermal alteration observed through the drill holes was classified into four types of alteration zones: propylitic, mixed-layer minerals, kaolin minerals, and ore mineralized zones. The mineral assemblage of the ore mineralized zone observed through TH-2, TH-4, and TH-6 is similar to those of Toyoha ore veins reported previously. The Fe³⁺/ΣFe ratios of chlorites were determined by X-ray photoelectron spectroscopy (XPS), in addition to the usual microprobe analyses. The ratios ranged from 0.20–0.26 for chlorites from the propylitic alteration zone and from 0.13 to 0.17 for those from the ore mineralized zone associated with sulfide minerals. After correcting the Fe³⁺ contents in the octahedral sites of chlorite structures, we obtained acceptable temperatures of the chlorite formation by application of geothermometers, for instance, a similar range of 150–300°C for chlorites from either the propylitic zone or the ore mineralized zone developed through TH-2, TH-4, and TH-6. Chlorites from the ore mineralized zone proximal to the Toyoha deposit are characterized by high Fe and Mn contents compared to the propylitic chlorites, which is similar to the Toyoha vein-filling chlorites; the formation temperatures were close to both the homogenization temperatures of fluid inclusions and the present subsurface temperatures measured through drill holes. Chlorites from the Toyoha ore veins, however, gave slightly higher formation temperatures (180–350°C) than those of chlorites from the ore mineralized zone in the drill cores. This suggests that several types of hydrothermal alteration occurred at different stages in the Toyoha geothermal field and the composition of product chlorite was controlled not only by the temperature but also the composition of fluid related to the formation. Reliable estimation of temperature for the chlorite formation provides basic information on evaluating correctly other physicochemical conditions prevalent at the formation.