活树桩固坡对边坡稳定性影响的数值分析

作为一种经济、环保的植物固坡方法,活树桩在发达国家得到了较为广泛的应用.笔者介绍了活树桩固坡方法的应用和施工方法,讨论了其加固机理.采用弹塑性有限元分析活树桩固坡对边坡稳定性的影响,研究了活树桩的入土长度、加固位置、数量、角度及其根系发展等因素对边坡安全系数影响的规律.     

人工土层冻结法加固在盾构出洞施工中的应用

软土地区盾构出洞施工中洞口土体易失稳、渗水,上海明珠线二期工程浦东大道站至张扬路站区间,隧道在盾构出洞施工中,为确保地面建筑及地下管线的安全及正常使用,首次采用了人工土层冻结加固,取得了良好的效果;本文介绍了该工程出洞口土体加固的方案选择、关键技术处理及实际取得的效果,并探讨了人工土层冻结加固在含水松软土层的地下工程中的应用前景.     

增量位移反分析在水电地下洞室工程中的应用

反分析是确定计算模型参数的有效方法.通常多采用量测所得全量位移进行反演计算.但地下工程中许多量测数据为增量位移,且实际施工过程可以通过建立分步开挖的有限元模型来模拟.据此,结合某水电站地下洞室工程中地下厂房的开挖,建立了模拟动态施工的有限元模型,利用某一开挖步施工前后量测值之差,采用增量位移优化反分析方法对洞室附近初始地应力场及围岩弹性模量进行了反演.计算所得增量位移与实测值符合较好,表明了这种方法的可行性.同时,根据分析结果对该方法进行了评价.     

A time-space based approach for mapping rainfall-induced shallow landslide hazard

A rainfall-induced shallow landslide is a major hazard in mountainous terrain, but a time-space based approach is still an unsettled issue for mapping rainfall-induced shallow landslide hazards. Rain induces a rise of the groundwater level and an increase in pore water pressure that results in slope failures. In this study, an integrated infinite slope analysis model has been developed to evaluate the influence of infiltration on surficial stability of slopes by the limit equilibrium method. Based on this new integrated infinite slope analysis model, a time-space based approach has been implemented to map the distributed landslide hazard in a GIS (Geographic Information Systems) and to evaluate the shallow slope failure induced by a particular rainfall event that accounts for the rainfall intensity and duration. The case study results in a comprehensive time-space landslide hazard map that illustrates the change of the safety factor and the depth of the wetting front over time.     

The Significance of Multiple Saturation Points in the Context of Polybaric Near-fractional Melting

Experimental petrologists have successfully located basalticliquid compositions parental to mid-ocean ridge basalt thatare, within experimental resolution, multiply saturated withthree-phase harzburgite or four-phase lherzolite assemblageson their liquidus at some elevated pressure. Such an experimentalresult is a necessary consequence of any paradigm in which eruptedbasalts derive from single-batch primary liquids that equilibratewith a mantle residue and undergo no subsequent magma mixingbefore differentiation and eruption. Here we investigate whether,conversely, such evidence of multiple saturation is sufficientto exclude dynamic melting models wherein increments of meltare mixed after segregation from residues, during melt transportor in magma chambers. Using two independent models of crystal–liquidequilibria to simulate polybaric near-fractional peridotitemelting, we find that aggregate liquids from such melting processescan display near-intersections of liquidus surfaces too closeto distinguish experimentally from exact multiple saturationpoints. Given uncertainties in glass compositions, fractionationcorrections, experimental temperature and pressure conditions,and achievement of equilibrium, these results suggest that polybaricmixtures can in fact masquerade as mantle-equilibrated single-batchprimary liquids. Multiple saturation points on the liquidussurfaces of primitive basalts do, however, preserve informationabout the average pressure of extraction of their constituentincrements of liquid. KEY WORDS: mantle melting; basaltic volcanism; experimental igneous petrology; thermodynamic modelling; inverse method     

Nuclear Waste Disposal Simulations: Couplex Test Cases

We give some results obtained for the Couplex test cases proposed by the ANDRA. In this paper our aim is twofold. Firstly, to compute the release of nuclides out of the repository by concentrating on the 3D near field (Couplex 2). The simulation of the transport phenomena takes into account the dissolution of the glass containers and congruent emissions of the radio-nuclides including filiation chains and some simplified chemistry. Secondly, it is to use the near field computations in order to simulate the nuclide migrations in a 2D far field (Couplex 3). Coupling in between the two simulations takes into consideration the periodicity of the disposal modules and the geometry of the repository described in Couplex 1. The mixed finite element and discontinuous Galerkin methods are used to solve the convection–diffusion equations. In order to handle the nonlinear precipitation/dissolution term, we developed a new iterative technique that combines Picard and Newton–Raphson methods.     

Asymptotic Analysis and Layer Decomposition for the Couplex Exercise

This document explores the possibilities of multiscale expansions and domain decomposition to solve part of the Couplex 1 exercise. We concentrate on the hydrostatic pressure and show that the slenderness of the domain and the large variations of the Darcy constants allows an analytical approximation which our test reveals to be true to relative errors smaller than 10^–3. The numerical tests are done in 2D with freefem+ and in 3D with freefem3D. Some considerations are also given for Iodine transport.     

鹅湖岩体岩石谱系单位的建立及其就位机制分析

鹅湖岩体为S型花岗岩 ,具有结构和成分演化序列。运用岩石结构序列法 ,将其划分为 5个单元 ,归并为 1个超单元。按侵入体空间展布形式、岩体地质学、岩石学、构造等资料 ,探讨了岩体就位机制     

Proposed support design, Kaletepe tunnel, Turkey

In this paper, preliminary support design of Kaletepe tunnel, located on Bilecik-Istanbul highway, Turkey, was analyzed by empirical and numerical methods. The rock mass rating (RMR) and rock mass quality (Q) systems were employed for empirical rock mass quality determination. Numerical analysis for the stress–strain distribution of the tunnel excavation and support systems was also carried out. The applied support performance was investigated at different sections of the tunnel route. It was seen that empirical and numerical approaches showed similar results. This indicates that when the empirical method is supported by numerical method, the preliminary support design will be more reliable.     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.