Influence of water logging time on the growth of candel seedlings

Influence ofwaterlogging time on the growth ofKandeliacandel(L.) Druce seedlings grown for 70 d in the artificial-tidal tanks' simulated semidiumal tide under greenhouse is studied. Sand and soil act as the substrate and artificial sea-water with salinity of 15 is used in cultivation. Shorter waterlogging time (inundated for about 2 ～ 4 h) promotes thegrowth of K. candel seedlings, while longer time(inundated more than 8 h) or no waterlogging(0 h) inhibits theirgrowth. The number and length of aerating roots increase with the increase ofwaterlogging time. Under existing condi-tions, the optimalwaterlogging time for the growth of K. canoel seedlings is about 2 ～ 4 h in every tide cycle. Com-pared with other treatments, the 2 h sanded treatments obtain the highest biomass of seedlings, have the lowest massloss ofhypocotyl and broaden the photosynthetic area by increasing the area per leaf after 70-d cultivation. And the soiltreatments have the similar tendeney. However, waterlogging for 8 h in every tide cycle is critieal for normal develop-ment of seedlings. K. candel seedlings are highly tolerant to waterlogging and a proper waterlogging is beneficial to thegrowth ofK. candel seedlings.     

Pseudo‐dynamic testing with substructuring at the ELSA Laboratory

The paper describes the distinctive features of the pseudo‐dynamic test method as implemented at the ELSA reaction‐wall facility. Both hardware and software aspects are considered. Particular attention is devoted to the digital control system and to a coupled numerical–experimental substructuring technique allowing realistic earthquake testing of very large structures. Mathematical and implementation details corresponding to this testing technique are given for both synchronous and asynchronous input motion. Selected test results illustrate the advantages of the presented features. Copyright © 2000 John Wiley & Sons, Ltd.     

A response spectrum approach for seismic performance evaluation of actively controlled structures

To evaluate and measure the effectiveness of active control schemes in reducing the response of structures subjected to earthquake excitations, it is common to use recorded or artificially generated earthquakes as input motions. This paper introduces the response spectrum analysis to evaluate linear control systems for seismic inputs defined by code‐prescribed or site‐specific ground response spectra. Using such a method one can evaluate a control system in a single analysis for the ensemble of time histories that are represented by the input response spectra. The response spectrum analysis can also facilitate the implementation of comprehensive parametric studies. A generalized response spectrum method is used to analyse systems with non‐symmetrical matrices that are caused by the general nature of the control actions imposed on the structure. The application of the method is demonstrated on several numerical examples of a building structure where the control force is applied through an active tuned‐mass damper. Copyright © 2000 John Wiley & Sons, Ltd.     

Extending the known distribution of the Younger Dryas Vedde Ash into northwestern Russia

The known distribution of wind‐blown Vedde Ash (ca. 10.3 ka BP) has been extended to the Karelian Isthmus in northwestern Russia. This has been possible as the result of a density separation technique that separates the rhyolitic Vedde Ash shards from the minerogenic host sediment. The Vedde Ash occurs in the middle of a pollen zone with high percentages of, for example, Artemisia and Chenopodiaceae, suggesting that the Younger Dryas (or GS‐I in the GRIP ice‐core event stratigraphy) was cold and dry throughout its duration. This is in agreement with sites in south Sweden where the Vedde Ash also occurs in the middle of a pollen zone dominated by Artemisia, Chenopodiaceae and Cyperaceae. Copyright © 2000 John Wiley & Sons, Ltd.     

The use of caesium‐137 to estimate agricultural erosion on steep slopes in a tropical watershed

The estimation of erosion and sediment delivery rates in tropical mountain watersheds is difficult and most of the methods widely used for estimating soil erosion over large areas have serious limitations. The ¹³⁷Cs approach has potential for quantifying soil erosion because it can provide retrospective estimates of long‐term (since 1963) net sediment redistribution relatively quickly. Despite its great potential, ¹³⁷Cs has not yet been used in an extensive, reconnaissance level survey of erosion in complex tropical mountain environments. The objective of this study was to examine the applicability of the ¹³⁷Cs method to estimate erosion on steep tropical agricultural lands (23 to 80% slopes) in the Nizao watershed, a humid, tropical mountain area of the Dominican Republic. In this study we (i) examine the variation of ¹³⁷Cs in ten reference sites—eight coffee groves and two forested sites—and (ii) estimate erosion from 14 cultivated fields. The soil pool of ¹³⁷Cs ranged from to 150 to 192 mBq cm⁻² on reference sites with minimal erosion. Variability among reference sites was less than expected for such complex mountain terrain. The variability within coffee and forested reference (average CV=28%) sites was similar to the variability found on grassland and forested reference sites in the temperate zone. The estimated annual soil loss from 14 sampled fields ranged from 6 to 61 t ha⁻¹ year⁻¹ with an overall mean of 26 t ha⁻¹ year⁻¹. Overall, the soil erosion estimates found using the ¹³⁷Cs method were much lower than those often assumed for such steep tropical hillsides. These erosion estimates account for soil loss since 1963 only and it seems likely that soil losses may have been much higher in earlier decades immediately after initial forest clearing earlier in the 20th century. Copyright © 2000 John Wiley & Sons, Ltd.     

A data‐based mechanistic modelling (DBM) approach to understanding dynamic sediment transmission through Wyresdale Park Reservoir,Lancashire, UK

This paper outlines the application of a new data‐based mechanistic (DBM) modelling methodology to the characterization of the sediment transmission dynamics in a small upland reservoir, Wyresdale Park, Lancashire. The DBM modelling strategy exploits advanced statistical procedures to infer the dynamic model structure and its associated parameters directly from the instrumented data, producing a parametrically efficient, continuous time, transfer function model which relates suspended sediment load at the reservoir inflow to the outflow at the event scale. The associated differential equation model parameters have physical attributes which can be interpreted in terms of sediment transmission processes and associated reservoir trap efficiency. Sedigraph analysis suggests that wind‐induced resuspension episodically supplies an additional load to the reservoir outlet. The stochastic nature of the DBM model makes it ideal for evaluating the effects of uncertainty through Monte Carlo simulations (MCS) for discharge and sediment transmission. Copyright © 2000 John Wiley & Sons, Ltd.     

Die neue EG‐Wasserrahmenrichtlinie: Bewertung der chemischen und ökologischen Qualität von Oberflächengewässern

The New EC Framework Water Directive: Assessment of the Chemical and Ecological Status of Surface Waters The main objective of the draft EC Framework Water Directive is the good quality of all surface waters. The directive provides for an assessment of the chemical status of surface waters (EU‐wide valid environmental quality standards for approximately 30 priority substances) and a five‐stage ecological classification of waters, comprising the stages high, good, moderate, poor, and bad. The starting point for the assessment are the reference conditions, which are defined as corresponding to high water quality and characterising a water status with no significant anthropogenic impact. The reference sites in the various water body types are to be selected using hydromorphological and physico‐chemical parameters and subsequently characterised by means of biological parameters. For surface waters, three groups of characteristics are provided for, namely: 1. with priority the biology – in the case of surface waters – with the four elements phytoplankton, macrophytes/phytobenthos, benthic invertebrate fauna, and fish fauna; 2. supporting the hydromorphology, e.g. flowing waters with the three elements hydrological regime, river continuity, and morphological conditions and 3. supporting the physico‐chemical conditions with the three elements general conditions, specific synthetic pollutants, and specific non synthetic pollutants (other than the priority substances of the chemical status).     

Non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements

A comprehensive study of non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements has been conducted. A numerical model of contraction joint reinforcements is presented for optimization control of the joint opening. The objective of this control is to reduce the joint opening and expectantly to balance the sustained loads between the horizontal and the vertical components of the dam, thus avoiding an overstress in the cantilever while retaining the release of arch tensile stresses to some extent. Several parameter studies such as critical element size and required number of joints to be simulated for convergence are also performed. As an engineering application, a 292‐m high arch dam (the Xiaowan arch dam) and the Big Tujunga dam are analysed in detail. The results demonstrate that the joint opening and the corresponding load transfer from the arch to cantilever components of the dam during strong earthquakes are substantial. It is also evident that by providing sufficient strength and reinforcement flexibility, the joint opening can be controlled to some extent. However, the stress redistribution due to reinforcement control is not sufficient to avoid the overstress in the cantilever for the Xiaowan arch dam. Thus, alternative measures are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

Modeling of an actively braced full‐scale building considering control–structure interaction

Recently, the application of active control to seismic‐excited buildings has attracted international attention. To demonstrate the practical applicability of active control, we have conducted experimental tests using a full‐scale three‐storey building equipped with active bracing systems on the shake table at the National Center for Research on Earthquake Engineering (NCREE), Taiwan. Experimental results indicate that the control–structure interaction (CSI) effect is significant. A state‐space analytical model of this actively controlled building taking into account the CSI effect is established in this paper using a system identification technique based on curve‐fitting of transfer functions. To verify the accuracy of the analytical model for simulating the controlled response, four sets of linear quadratic Gaussian (LQG) controllers using acceleration feedback are designed and further experimental tests are conducted for comparison. It is demonstrated that the correlations between the simulation and experimental results are remarkable. The construction of an accurate analytical model is important for active control, and such an analytical model can be used for future benchmark studies of different control algorithms based on numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.     

Establishing absorbed energy spectra—an attenuation approach

For energy‐based seismic design, energy demand in the form of absorbed energy spectra was established by an attenuation relationship. The absorbed energy is proposed for evaluating the energy demand in an inelastic system because the absorbed energy is directly related to the pseudo‐velocity in the elastic case. Based on a total of 273 ground motion records from 15 significant earthquakes in California, an attenuation relationship of the absorbed energy was established from a two‐stage non‐linear regression analysis. This relationship was established for a given earthquake magnitude, source‐to‐site distance, site class, and ductility factor. A similar expression for the normalized absorbed energy was also developed. This study showed that the absorbed energy for near‐field ground motions can be significantly larger than that predicted by the attenuation relationship for normal ground motions. Copyright © 2000 John Wiley & Sons, Ltd.