Geology and Lead–Sulphur Isotope Compositions of the Tongyu Volcanic-Hosted Massive Sulphide Copper Deposit in the Western Part of the North Qinling Orogen, China

The Tongyu copper deposit, located in the western part of the North Qinling Orogen, China, is one of several volcanic-hosted massive sulphide(VHMS) deposits with industrial value and is also a typical example of mineralization related to the subduction and metallogenesis during the Caledonian orogeny. We conducted systematic lead-sulphur isotope geochemical analyses of the Tongyu deposit to understand the possible ore-forming material sources and tectonic settings. Twenty-six sulphide samples yielded clustered δ~(34)S_(CDT) values of 1.13‰-3.36‰, average 2.22‰, and show a tower-type distribution,implying that the sulphur of the Tongyu copper deposit mainly originated from a mantle source. The Pb isotope compositions of sulphides(~(206)Pb/~(204)Pb = 17.59225-18.56354, average 18.32020; ~(207)Pb/~(204)Pb =15.51770-15.69381, average 15.66217; ~(208)Pb/~(204)Pb= 37.99969-39.06953, average 38.52722) are close to the values of the volcanic host rocks(~(206)Pb/~(204)Pb= 18.10678-18.26293, average 18.21158; ~(207)Pb/~(204)Pb =15.63196-15.68188, average 15.65345; ~(208)Pb/~(204)Pb= 38.43676-38.56360, average 38.49171), thus consistent with the Pb in ores and volcanic host rocks having been derived from a common source that was island-arc Pb related to oceanic crust subduction. The northward subduction of the Palaeo-Qinling oceanic crust triggered dehydration of the slab, which generated a large amount of high-oxygen-fugacity aqueous hydrothermal fluid. The fluid rose into the mantle wedge, activated and extracted metallogenic material and promoted partial melting of the mantle wedge. The magma and ore-forming fluid welled up and precipitated, finally forming the Tongyu VHMS copper deposit.     

柴达木盆地东部烃源岩的生源与沉积环境

用色谱-质谱、稳定同位素质谱等分析测试技术，对柴达木盆地东部地区寒武系、奥陶系、泥盆系、石炭系和侏罗系岩样进行地球化学特征分析。从饱和烃生物标志化合物特征、正构烷烃单体碳同位素分布特征等方面入手，对该区的烃源岩的生源与沉积环境作了详细研究。结果表明，柴达木盆地东部地区古生界有机质多为菌、藻类生源，少数有陆源有机质混入（主要是石炭系）。有机质多为强还原环境的海相沉积，少数为海陆过渡相沉积。侏罗系在一些地区和层段并非典型的成煤环境，而是属于滨浅湖相，少数为半深湖-深湖环境，因此具有一定的生烃能力。     

江汉盆地东部早中生代沉积地层碎屑云母成分:对大别高压-超高压岩石暴露作用的约束

碎屑白云母是碎屑岩中常见的、来自源区的稳定成分,可以用来指示源区性质,多硅白云母是碰撞造山高压-超高压变质岩石的特征矿物。对大别造山带同造山期沉积而成的江汉盆地东部上三叠统-中侏罗统砂岩碎屑白云母化学成分研究表明:上三叠统该区地层砂岩中碎屑白云母多以低硅白云母(Si<3.2)为特征,暗示此时大别造山带高压-超高压岩石很可能没有出露地表;自下侏罗统开始,砂岩中碎屑白云母中多硅白云母(Si>3.3)大量出现,中侏罗统砂岩多硅和低硅白云母发育,表明大别高压-超高压岩石在早侏罗世即已出露地表并经剥蚀搬运至盆地。这一结果从沉积学角度为约束高压-超高压岩石的折返时序和大别造山带演化提供了新的资料。     

Metamorphic evolution of garnet-bearing ultramafic rocks from the Gongen area, Sanbagawa belt, Japan

Garnet‐bearing ultramafic rocks including clinopyroxenite, wehrlite and websterite locally crop out in the Higashi‐akaishi peridotite of the Besshi region in the Cretaceous Sanbagawa metamorphic belt. These rock types occur within dunite as lenses, boudins or layers with a thickness ranging from a few centimetres to 1 metre. The wide and systematic variation of bulk‐rock composition and the overall layered structure imply that the ultramafic complex originated as a cumulate sequence. Garnet and other major silicates contain rare inclusions of edenitic amphibole, chlorite and magnetite, implying equilibrium at relatively low P–T conditions during prograde metamorphism. Orthopyroxene coexisting with garnet shows bell‐shaped Al zoning with a continuous decrease of Al from the core towards the rim, consistent with rims recording peak metamorphic conditions. Estimated P–T conditions using core and rim compositions of orthopyroxene are 1.5–2.4 GPa/700–800 °C and 2.9–3.8 GPa/700–810 °C, respectively, implying a high P/T gradient (> 3.1 GPa/100 °C) during prograde metamorphism. The presence of relatively low P–T conditions at an early stage of metamorphism and the steep P/T gradient together trace a concave upwards P–T path that shows increasing P/T with higher T, similar to P–T paths reported from other UHP metamorphic terranes. These results suggest either (1) down dragging of hydrated mantle cumulate parallel to the slab–wedge interface in the subduction zone by mechanical coupling with the subducting slab or (2) ocean floor metamorphism and/or serpentinization at early stage of subduction of oceanic lithosphere and ensuing HP–UHP prograde metamorphism.     

中国海相碳酸盐岩评价中有关有机质丰度下限的几点讨论

综述了中国海相碳酸盐岩有机质下限研究的若干进展,认为针对不同需求,应提出碳酸盐岩烃源岩最低下限、有效烃源岩下限、战略选区下限3个不同的下限标准。高成熟碳酸盐岩原始有机质丰度恢复一直存在争议,根据生烃动力学,结合热史,可实现原始有机质总量的恢复。碳酸盐岩中泥质与有机质丰度、排烃能力是否相关仍存在争论,认为碳酸盐岩中泥质的作用仍有待进一步研究。     

浑江末前寒武纪丝状藻类及其环境意义

本文初步探讨了吉林浑江晚前寒武纪丝状藻类与沉积环境的关系。这些丝状藻类产自晚前寒武纪不同层位,大多属蓝绿藻类。通过对丝状藻类整体面貌和个体丰度的分析,笔者将其划分为三类即:藻席型、孤立生存型和其间的过渡类型。根据对现代丝状藻类生态及环境的研究,采取比较古生物学的方法,具体讨论了浑江地区晚前寒武纪丝状藻类的指相意义。根据沉积学与事件地层记录分析的沉积环境模式与对丝状藻类环境分析的结果是一致的。     

中国东部断陷湖盆细粒沉积岩岩相划分方案探讨——以渤海湾盆地南部古近系细粒沉积岩为例

细粒沉积岩岩相研究是烃源岩和页岩油、致密油储层研究的重要基础,鉴于我国陆相断陷湖盆环境多变和细粒沉积岩类型多样、岩石组合类型复杂的特点,需要进行细粒沉积岩岩相分类。以渤海湾盆地南部古近系细粒沉积岩发育段为研究对象,通过厘米级岩芯观察描述、岩石薄片鉴定、激光共聚焦显微镜观察分析等技术,研究细粒沉积岩基本特征。陆相断陷湖盆细粒沉积岩岩相划分可以按照(1)宏观岩芯精细观察描述,归纳垂向岩石类型组合;(2)分析沉积微环境;(3)对不同岩石类型组合进行X射线全岩矿物衍射和TOC测试,划分岩石类型和岩相大类;(4)微观镜下剖析纹层叠置关系;(5)分析成因和形成机制,对岩亚类细分等5步进行。岩相大类划分要简洁,是为满足油田勘探工作易于操作、建立与常规测井资料之间关系等要求;亚类细分是便于研究微观源储关系、分析沉积微环境和储层微观结构等。     

The Influence of Chlorine on the Determination of Combined Water: An Investigation of a Correction Procedure

Differential thermal analysis, pH determination and ion chromatography were used to investigate the interference of chlorine in the determination of combined water (H₂O⁺) by the Penfield tube gravimetric method. The magnitude of the chlorine interference was quantified and a correction method was proposed to obtain accurate results for H₂O⁺. The method was applied to the determination of H₂O⁺ in deep sea sediments containing chlorine and certified reference materials of oceanic polymetallic nodules.     

China''''s First Exploration of Chukchi Sea and Its Adjacent Waters in the ArcticA Study on Lead Geochemistry of Atmospheric Aerosol

1ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｒａｐｉｄｄｅｖｅｌｏｐｍｅｎｔｏｆｈｕｍａｎｓｏｃｉｅｔｙ ,ｉｎｄｕｓｔｒｉａｌｉｚａｔｉｏｎｈａｓｂｅｅｎｓｐｅｅｄｅｄｕｐ .Ａｓａｒｅｓｕｌｔ,ｍｅｔａｌｍｉｎｉｎｇａｎｄｍｅｔａｌｌｕｒｇｙ ,ｃｏａｌａｎｄｇａｓｏｌｉｎｅｃｏｍｂｕｓｔｉｏｎａｎｄｃｈｅｍｉｃａｌｓｐｒｏｄｕｃｔｉｏｎｈａｖｅｇｉｖｅｎｏｆｆａｌｏｔｏｆＰｂ ｃｏｎｔａｉｎｉｎｇｉｎｄｕｓｔｒｉａｌｐｏｌｌｕｔａｎｔｓｗｈｉｃｈｈａｖｅｄｏｎｅｇｒｅａｔｈａｒｍｔｏｔｈｅｅｃｏｌｏｇ…     

高精度温度采集系统设计

针对高精度温度采集的需求,设计了一个以低功耗单片机MSP430F149作为核心处理器,以PT100铂电阻为传感器的温度采集系统。为了提高系统的复用性,采用精密电阻法,从硬件设计上消除了恒流源电流漂移以及A/D转换电路参考电压精度对温度测量数据的影响。重点描述了系统设计方案,详细说明了恒流源选择的原则、电流偏差的消除以及AD7792转换器的操作步骤。实验结果表明,温度测量精度优于0.1 ℃。对比试验表明,系统稳定性良好,已应用于业务产品中。