镇康芦子园铅锌矿床特征及成因

芦子园铅锌矿产于镇康复背斜核部寒武系沙河厂组大理岩、板岩、片岩地层中，沿背斜轴部产生的断层及层间破碎带是主要的容矿构造，成矿物质来源于地层、酸性及基性岩浆热液，矿床成因为沉积-热液改造叠生型铅锌矿床。     

永平水泄铜钴矿控矿因素

水泄铜钴矿区地质条件较为复杂,控矿因素较多,通过分析认为主要受断层及岩性控制,地层初始富集,构造及区域变质作用提供通道及热源。水的循环、溶解作用形成热卤水成矿。     

易门赵普新沟白钨矿矿床地质及控制因素

新沟白钨矿属典型的接触交代(矽卡岩)变质矿床。晋宁晚期的岩浆活动强烈,黑云二长花岗岩是矿区主要成矿岩体。钨矿体赋存在花岗岩体两侧与昆阳群大龙口组灰岩接触带矽卡岩中,地层、岩石、构造对矽卡岩及矿体都有控制作用。     

Three mechanisms of ore re-mobilisation during amphibolite facies metamorphism at the Montauban Zn–Pb–Au–Ag deposit

The relative importance of mechanical re-mobilisation, hydrothermal dissolution and re-precipitation, and sulphide melting in controlling redistribution of metals during concurrent metamorphism and deformation is evaluated at the middle amphibolite facies Montauban deposit in Canada. As at many other deposits, ductile deformation was important in driving mechanical re-mobilisation of massive sulphides from limb regions into hinge regions of large-scale folds and is thus the most important for controlling the economics of Pb and Zn distribution. Two possible stages of hydrothermally driven re-mobilisation are discussed, each of which produces characteristically different alteration assemblages. Prograde hydrothermal re-mobilisation is driven by pyrite de-sulphidation and concurrent chlorite dehydration and is thus an internally driven process. At Montauban, the H₂S-rich fluid generated through this process allowed re-mobilisation of gold into the wall rock, where it was deposited in response to sulphidation of Fe Mg silicates. Retrograde hydrothermal re-mobilisation is an externally driven process, whereby large volumes of fluids from outside the deposit may dissolve and re-precipitate metals, and cause hydration of silicate minerals. This second hydrothermally driven process is not recognised at Montauban. Sulphide melting occurred as temperatures neared the peak metamorphic conditions. Melting initiated in the massive sulphides through arsenopyrite breakdown, and a small volume of melt was subsequently re-mobilised into the wall rock. Trace element partitioning and fractional crystallisation of this melt generated a precious metal-rich fractionate, which remained mobile until well after peak metamorphism. Thus, prograde hydrothermal re-mobilisation and sulphide melting were the most important mechanisms for controlling the distribution of Au and Ag.     

Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

湘中锡矿山式锑矿成矿地质条件分析

湘中锡矿山式锑矿形成于晚白垩-古新世,空间上与岩脉关系密切,各锑矿床、矿化点都伴有或附近发育有煌斑岩及中-酸性岩脉群,在锑矿成矿同期地质事件中,还有周缘一些中-新生代红色盆地的形成及基性火山岩喷发,据之,提出湘中锡矿山式锑矿成矿与燕山晚期拉张构造-岩浆活化作用有关.锑矿床(点)基本上都产出于两组或两组以上断裂的交汇点附近,3组断裂的交汇部位对应于最主要的锑矿床(点).矿体具体受断裂交汇部位附近的次级短轴背斜轴部、倾伏背斜的倾伏端及其翼部被纵向陡倾角断裂构造所切穿的部位控制,是断裂导矿与背斜构造圈闭的体现.岩性组合控矿表现为易于硅化蚀变交代的砂质碳酸盐岩与隔挡层泥质岩所构成的岩性圈闭.根据包裹体均-温度和盐度测定成果,推算成矿压力为(200～300)×10⁵Pa,成矿深度约为1 km.     

721矿山南铀矿石微生物槽浸的适应性实验研究

以山南铀矿石为研究对象，探讨了微生物槽浸铀实验过程中有关参数（Fe^3 ,Fe^2 ,pH,Eh,U)的变化规律。在此基础上，评价了山南铀矿石微生物槽浸的适应性。     

云南麻栗坡新寨锡矿物化探异常特征

新寨锡矿是物化探扫面发现的大型锡石硫化物矽卡岩型矿床，高磁，高激电率，低电阻率异常，原生晕Sn,W,Cu,Zn,As,B,Ag,Cd,Be,Bi,In,F(Mo,Ge,Co)等元素异常，次生晕Sn,Cu,Zn,As,B等异常，总结地球物理化学特征，对滇东南寻找同类矿床具有重要指导意义。     

地电提取测量法在北衙寻找隐伏矿的可行性

地电化学提取测量法是应生产需要而发展起来的一种轻便，快捷的寻找隐伏矿床的方法，在云南鹤庆县北衙地区进行实验研究，取得较好的效果，并在末知矿区圈定了远景规划区，为进一步探矿提供科学依据。     

上扬子台区下寒武统黑色岩系中的钒矿床

我国南部早寒武世黑色岩系中，蕴藏丰富的金属和非金属矿产。而位于扬子地台东南缘的钒矿床尤其令人瞩目。本文以湘西为例，剖析该类钒矿地质特征和成矿规律。矿床产于下寒武统黑色岩系底产的碳系页岩、硅岩及黑色页岩组合。矿层呈层状、似层状，产权稳定，埋藏浅，储量大。矿石主要由水云母（伊利石）和石英组成，含有机质及藻类化石。成矿受地层、岩性、古构造和古地理条件控制。矿床具有微生物成矿与海底热水沉积双重特征，成因应属生物地球化学积积矿床范畴。