伟晶花岗岩型铀矿石堆浸工艺研究与应用

介绍某低品位伟晶花岗岩型铀矿石矿物特性。研究在混合氧化剂存在条件下的这种难浸矿石的堆浸工艺。500 t半工业结果表明：试验解决了该类型矿石堆浸工艺,达到了工业生产要求的技术指标。     

大别山东南缘侏罗系磨山组沉积环境及地质意义

侏罗纪是大别造山带与周缘盆地盆山关系研究的一个重要时期,分布在大别造山带周缘的侏罗纪地层为大别山的造山过程以及深俯冲岩石的折返、剥蚀提供了很好的约束。本文选取大别造山带东南缘安庆月山地区侏罗系磨山组为研究对象,对磨山组碎屑岩进行了详细的粒度分析、碎屑组分分析、重矿物分析和碎屑锆石年代学分析。碎屑岩岩石、沉积特征和粒度分析都指示早侏罗世磨山组为三角洲前缘水下分流河道沉积。碎屑组分分析、重矿物分析结合碎屑锆石年代学分析指示磨山组碎屑岩物源主要来自南侧的华南板块,大别造山带宿松杂岩可能为其提供了少量物源,但碎屑物源中未见石榴子石和典型的三叠纪变质锆石,说明此时大别高压-超高压榴辉岩可能仍未折返至地表。     

钦-杭结合带南段新元古代俯冲作用:来自粤西贵子混杂岩变基性岩年代学和地球化学的证据

新元古代以来,扬子地块和华夏地块拼贴形成钦-杭结合带。粤西贵子混杂岩为揭示钦-杭结合带南段地质演化提供了一个重要的窗口。贵子混杂岩构造岩块为强烈变形-变质的变基性岩、深海硅质岩,基质为石英岩、云母片岩以及具鲍马序列富锰质硅泥质岩等。对混杂岩中变基性岩年代学和元素地球化学分析显示,锆石U-Pb年龄为948±11Ma,除少部分属低钾(拉斑)外,其余均为钙碱性系列,CIPW标准矿物成分属石英拉斑玄武岩-橄榄拉斑玄武岩组合。变基性岩具有高TiO_2(平均1.85%)、P_2O_5(平均0.21%)的特点;无Eu异常或轻微负异常,配分曲线右倾(球粒陨石标准化(La/Yb)N=2.65~3.89),大离子亲石元素(Rb、Ba、Th、U)富集,高场强元素(Nb、Zr、Hf)轻微亏损,表现为洋壳消减作用下岛弧岩浆岩特征。高的Nb(7.56×10~(-6)~16.11×10~(-6),均大于7×10~(-6))、Nb/U(18.39~25.65)、(Nb/La)N(0.76~0.94,原始地幔标准化)显示为岛弧环境富Nb玄武岩。本研究认为,云开地块出露的这套构造混杂岩,是新元古代古华南洋俯冲在钦-杭结合带南段的记录,可为该带的南东边界提供线索。     

库车前陆冲断带西部却勒盐推覆体变形特征分析

库车前陆冲断带西部发育中国最好的地表盐构造,可作为盐构造研究的天然实验室。前人对本区盐构造的研究主要集中于地下,包括地下盐构造样式的识别、地下盐构造分段性研究及盐构造形成机制研究等,而对于地表盐构造的研究相对较少。文章在前人研究的基础上,通过详细的野外填图,并辅以地震解释、遥感解译等方法,对库车前陆冲断带西部却勒盐推覆体变形特征进行分析,认为却勒盐推覆体的发育受控于却勒逆冲断层,库姆格列木群盐岩随逆冲断层出露地表。盐推覆体在东西向上构造差异较大,具有明显的分段性,在推覆体的中、西部,推覆体上盘地层发育齐全,盐岩仅沿推覆体逆冲前缘出露地表,属于典型的露趾增生型盐席;而在推覆体东部的察尔汗盐席处,盐上地层被剥蚀,盐岩出露地表后在重力的驱动下向周缘流动,属于溢流增生型盐席。察尔汗盐席受地表径流和降水作用影响明显,发育大量溶洞和盐山构造,并以"脉动流"的形式向前增生。盐内能干层的变形特征是反映盐岩流动性强弱的指标,盐推覆体东部察尔汗盐席盐内能干层变形样式更复杂,盐岩的流变性更强。缺少厚层顶板的限制和受降水及地表径流的充分影响是察尔汗盐席盐岩流变性较强的原因。     

Geochronology, Petrology and Geochemistry of Xingdi No. 3 Mafic-Ultramafic Intrusions in the Northeastern Tarim Craton, NW China

The Xingdi mafic-ultramafic intrusions occur in the northeastern margin of the Tarim craton. The Xingdi No. 3 intrusion is the smallest of four intrusions, with an exposed area of 1.7 km~2, and the zircon U-Pb age of the intrusion is 752±4 Ma. The intrusion consists of gabbros, pyroxenites and peridotites, and exhibits a crystallization sequence of the main rock-forming minerals as olivine, orthopyroxene, clinopyroxene and plagioclase. Mineralization occurred at or near the boundaries of the intrusion between pyroxenites and peridotites, and appears as a layered or lenticular shape about 500 m long and 4–15 m wide. The primary sulfides have a relatively simple mineralogy dominated by pyrrhotite-pentlandite-chalcopyrite assemblages, which occur as droplet, star-like and graphic texture and locally sideronitic structures. Geochronological and geochemistry investigations suggest that the Xingdi mafic-ultramafic intrusions and coeval volcanic rock in the Kuluktag area of the Tarim craton formed in an intracontinental breakup environment. Based on the composition of the dominant rockforming minerals and covariant relationships of other oxides versus Mg O, the parental magma of the Xingdi No.3 intrusion belongs to high-Mg tholeiitic basaltic magmas with Mg O of 10.78 wt%. The Xingdi No.3 intrusive rocks are characterized by light REE enrichment relative to heavy REE, negative Nb-Ta anomalies, low ~(143)Nd/~(144)Nd ratios(from 0.511183 to 0.511793) and high initial ~(87)Sr/~(86)Sr ratios(from 0.7051 to 0.7113). The magma was derived from the enriched-lithospheric mantle and was contaminated during emplacement. According to rock assemblages, mineralization, olivine characteristics, geochemical characteristics and mass balance, there are better copper-nickel ore prospects in the Xingdi No.3 intrusion than in the other three intrusions in the area.     

Jurassic Hornblende Gabbros in Dongga, Eastern Gangdese, Tibet: Partial Melting of Mantle Wedge and Implications for Crustal Growth

The Gangdese batholith, more than 2500 km in length, is composed mainly of JurassicMiocene igneous rocks. This batholith is one of the most important constituents of the Tibetan orogenesis and provides an ideal place for study of Neo-Tethyan ocean geodynamic evolution and plateau uplift. Recent studies on the Gangdese Jurassic felsic magmatism highlight its juvenile source. However, important aspects concerning the genesis of the juvenile magmatism and related deep geodynamic evolution are still unclear. Here, we report detailed petrological, geochronological, geochemical, whole-rock Sr-Nd isotopic, and in situ Sr-Hf isotopic data for a recently identified hornblende gabbro in the Dongga area, southern Lhasa sub-block. This hornblende gabbro is dominated by hornblende and plagioclase, dated at Early Jurassic(ca. 180–190 Ma), and characterized by a narrow compositional range in SiO_2(49.38wt%–52.27wt%), MgO(4.08wt%–7.00wt%), FeO(10.43wt%–11.77wt%), Na_2O(2.58wt%–3.51wt%), and K_2O(0.48wt%–1.53wt%). It has depleted isotopic signatures, with whole-rock(~(87)Sr/~(86)Sr)i ratios of 0.7033–0.7043, ε_(Nd)(t) values of +4.90 to +6.99, in situ plagioclase(~(87)Sr/~(86)Sr)i ratios of 0.7034–0.7042, and zircon ε_(Hf)(t) of +12.2 to +16.8. Our results integrated with published data suggest a model of Gangdese juvenile crustal growth by a subduction-related water-enriched mantle wedge. The hydrous partial melting of the lithosphere mantle was triggered by the dehydration of a Neo-Tethyan oceanic slab. This mafic magmatism emplaced in the middle-lower crust of intraoceanic arcs or active continental margins, leading to Jurassic juvenile crustal growth in southern Tibet.     

牟平邓格庄金矿地质特征及找矿方向

邓格庄金矿成因类型为中温热液充填式富硫含金黄铁矿石英脉型金矿床。通过对邓格庄金矿床的地质特征、控矿因素及矿床成因的系统研究,认为矿区NNE向断裂与其他方向断裂交汇部位为金矿的有利成矿部位,在分析找矿标志的基础上,提出应加大矿区深部及外围的找矿力度,进一步查证地球物理、化学异常,以期发现新的金矿远景区,进而指出了深部找矿的方向。     

山东玲珑九曲金矿床地质特征及流体包裹体研究

山东玲珑九曲金矿床位于金矿田的东部,属石英脉--蚀变岩型金矿床,矿化分为4 个阶段,黄铁矿--石英脉阶段,石英--黄铁矿阶段,多金属硫化物阶段和石英--碳酸盐阶段。流体包裹体研究表明,九曲金矿床主成矿阶段石英中发育气液两相和含CO2 三相包裹体,也可见少量的富气相包裹体。气液两相包裹体均一温度范围为133. 5 ℃ ～ 325. 7 ℃,峰值为290 ℃ ～ 310 ℃,盐度为2. 80% ～ 17. 82% NaCl; 含CO2 三相包裹体均一温度范围为236. 5 ℃ ～ 315 ℃,出现两个峰值,为230 ℃ ～ 240 ℃和310 ℃ ～ 320 ℃,盐度为0. 41% ～ 8. 92%NaCl; 富气相包裹体均一温度范围为222. 1 ℃ ～ 236. 4 ℃,峰值为230 ℃ ～ 240 ℃,盐度为7. 71% ～ 9. 98%NaCl。综合地质条件、矿床特征和包裹体显微测温结果认为: 九曲金矿床成矿流体为中温、中低盐度的NaCl --H2O --CO2 型体系,矿床属中温岩浆热液成因类型。     

SYZX绳索取心液动锤在小秦岭金矿田复杂地层深部钻探中的应用

小秦岭金矿田南、北矿带深部找矿钻探施工中,应用SYZX绳索取心液动锤钻进技术,对深孔钻进采取防斜保直钻进,为钻孔的顺利延伸创造了条件,在硬碎地层中钻进,提高回次进尺,提高小时效率,延长钻头寿命,体现出了液动锤技术的优越性,并对液动锤使用中易出现的问题进行了总结。     

绳索取心液动潜孔锤钻进技术在利比里亚邦山铁矿详查中的应用与探索

绳索取心液动锤技术集绳索取心技术与液动潜孔锤技术优势于一体,可比普通绳索取心钻进提高纯钻速30%～150%,在坚硬、脆性、“打滑”地层中钻进效果更为明显。介绍了绳索取心液动潜孔锤钻进技术在利比里亚邦州邦山铁矿详查中的应用情况,并对其应用效果进行了分析讨论。