山东省胶莱盆地东北缘宋家沟金矿地质特征及其成因初探

山东省宋家沟金矿位于胶莱盆地东北缘 ,产于莱阳群林寺山组断裂破碎带中。牟—即断裂带为切割莱阳群的断裂 ,对金矿起控制作用。早白垩纪晚期的火山—岩浆活动为深部含金热液的运移提供了通道 ,并在其有利的构造部位沉淀成矿。稀土元素特征和氧、硫同位素特征亦说明宋家沟金矿的物质来源以深源为主 (幔源及下地壳中的金 ) ,是早白垩世晚期的火山—岩浆活动作用的结果。     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

Timing of Fracture Formation and Duration of Mineralization at the Hishikari Deposit, Southern Kyushu, Japan

Abstract. The Hishikari epithermal gold deposit consists of the Honko-Sanjin zone and Yamada zone. On the basis of observed crosscutting relationships of veins, vein system in the Hishikari deposit was classified into the early and late veins. They differ from orientation, width, control by unconformity, the amount of displacement and structural features, but have similarity in gold grade and Au/Ag ratios. K-Ar ages are presented for the classified veins to clarify timing of fracturing and duration of mineralization.
Age determination revealed that the early veins in the Honko-Sanjin zone range from 0.86 to 1.11 Ma and that the late veins range from 0.73 to 0. 84 Ma. The economically most important mineralization in the Hishikari deposit occurred around 0.90 Ma in a very short period (about 0.05 million years).
The distribution of mineralization age in the whole Hishikari deposit, occurrences of slickensides and ground water temperatures imply that mineralization lasted longer in the southern part of the deposit. As compared the early veins with late veins, structural changes including width, strike, dip and vein characteristics occurred at around 0.85 Ma.     

Geochronology of Gold Deposits and Its Implication for Metallogenesis in the Fengxian-Lixian Area, Qinling Orogenic Belt, China

Abstract: A series of super large‐scale and large‐scale Pb and Zn, and Au deposits are distributed in the Qinling orogenic belt, China. Gold deposits were generally ascribed to Carlin‐type originated from circular meteoric water. Visible and coarse‐grained gold (up to over 3mm in grain size) was recently identified in some gold deposits in the Fengxian‐Lixian area, Qinling. Au‐bearing quartz lodes related to magmatism were discovered in the Xiaogouli gold deposit. Two types of Au‐bearing quartz veins, i.e., NW‐trending quartz veins and NE‐trending quartz veins cutting strata are widely present in the Baguamiao gold deposit. Both are spatially associated with each other. The former is generally snake–like, S‐shape or zigzag, which was resulted from plastic deformation by ductile shearing, being generally cut by the latter. The latter is generally linear with widely developed bleaching alteration zones in its adjacent wall rocks, which symbolizes the superimposition of brittle deformation and filling and metasomatism of magmatic hydrothermal solution in ductile shear zones after uplifting of the shear zones near the surface. The NW‐trending quartz veins contain Au of lower than 3ppm. The NE‐trending quartz veins contain Au of more than 3 ppm, so that NE‐trending quartz veins and the adjoining altered rocks are important ores. The NW‐trending Au–bearing quartz vein was dated as 210.61.26 to 232.581.59 Ma by ⁴⁰Ar–³⁹Ar method, i.e., late Indosinian epoch (Triassic). The NE‐trending Au–bearing quartz vein was dated as 131.910.89 to 197.451.13 Ma by ⁴⁰Ar–³⁹Ar method, i.e., Yanshanian epoch (Jurassic). The ⁴⁰Ar–³⁹Ar age of the NW‐trending Au–bearing quartz veins represents the age of the ductile shear formation. The isotope data of the NE‐trending quartz veins indicate that gold mineralization was closely related to Indosinian and Yanshanian granite intrusives not only in time and space, but also in origin.     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.     

Caractérisation des paragenèses et des paléocirculations fluides dans l'indice d'or de Bleı̈da (Anti-Atlas,Maroc)Characterization of the paragenesis and the fluid palaeo-circulations in the gold showings of Bleida (Anti-Atlas,Morocco)

The gold showings at Bleida are hosted in Late Pan-African N50–80 °E quartz–hematite–chlorite 1 tension lenses that are related to the activity of major sinistral sub-east–west thrusts. Ores result from three superimposed stages of fluid migration. Gold occurs in microcracks offsetting the earlier minerals. Fluids evolved from COHN compositions with a saline component to boiling aqueous fluids. Pressure and temperature decreased from 50 MPa and 300 °C to less than 4 MPa and 150 °C. Thus, the gold showings at Bleida were formed in a typical geothermal (epithermal) setting, likely controlled by the Late Pan-African magmatism. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 35–41     

华北地台北缘地球物理场特征与金属矿床预测

对华北地台北缘的地球物理场特征进行了探讨,根据重、磁异常数据反演计算了该地区的莫霍界面、居里界面、磁性界面的起伏.利用地球物理场资料和反演计算结果对该地区的构造格架和断裂进行了推断,同时预测了9个成矿远景区:(1)集宁一呼和浩特金成矿区;(2)张家口一赤城金、银多金属成矿区;(3)密云一高岭金、铜成矿区;(4)青龙一马兰庄金成矿区;(5)秦皇岛、金多金属成矿区;(6)郝家营多金属成矿区;(7)承德地区金、多金属成矿区;(8)赤峰一喀喇沁旗金成矿区;(9)宁城东金、多金属成矿区.     

The environmental impact of small-scale gold mining in Ghana: identifying problems and possible solutions

This paper examines the environmental impacts of small-scale gold mining in Ghana, and prescribes a series of recommendations for improving environmental performance in the industry. Since the enactment of the Small Scale Gold Mining Law in 1989, which effectively legalized small-scale gold mining in the country, industrial operations, collectively, have made important contributions to national gold output, foreign exchange earnings and employment. Accompanying this pattern of socio-economic growth, however, have been increased environmental complications – namely, mercury pollution and land degradation. The Ghanaian Minerals Commission has been burdened with most of the jurisdictional responsibilities related to small-scale mining, but with a staff of only 35–40 people working with a pool of highly obsolete research resources, it is clearly incapable of facilitating sufficient environmental improvement on its own. It is concluded that marked environmental improvements can only be achieved if: (1) assistance is provided to the Minerals Commission from local governmental bodies and academic units; (2) industry-specific environmental management tools and strategies are designed and implemented; (3) concerted effort is made to prospect for deposits suitable for small-scale gold mining, a key to preventing unnecessary exploration; and (4) a nation-wide industrial mercury study is commissioned, and a mercury retorting programme is implemented.     

Use of Noise to Augment Training Data: A Neural Network Method of Mineral–Potential Mapping in Regions of Limited Known Deposit Examples

One of the main factors that affects the performance of MLP neural networks trained using the backpropagation algorithm in mineral-potential mapping isthe paucity of deposit relative to barren training patterns. To overcome this problem, random noise is added to the original training patterns in order to create additional synthetic deposit training data. Experiments on the effect of the number of deposits available for training in the Kalgoorlie Terrane orogenic gold province show that both the classification performance of a trained network and the quality of the resultant prospectivity map increasesignificantly with increased numbers of deposit patterns. Experiments are conducted to determine the optimum amount of noise using both uniform and normally distributed random noise. Through the addition of noise to the original deposit training data, the number of deposit training patterns is increased from approximately 50 to 1000. The percentage of correct classifications significantly improves for the independent test set as well as for deposit patterns in the test set. For example, using ±40% uniform random noise, the test-set classification performance increases from 67.9% and 68.0% to 72.8% and 77.1% (for test-set overall and test-set deposit patterns, respectively). Indices for the quality of the resultant prospectivity map, (i.e. D/A, D × (D/A), where D is the percentage of deposits and A is the percentage of the total area for the highest prospectivity map-class, and area under an ROC curve) also increase from 8.2, 105, 0.79 to 17.9, 226, 0.87, respectively. Increasing the size of the training-stop data set results in a further increase in classification performance to 73.5%, 77.4%, 14.7, 296, 0.87 for test-set overall and test-set deposit patterns, D/A, D × (D/A), and area under the ROC curve, respectively.     

Use of Fuzzy Membership Input Layers to Combine Subjective Geological Knowledge and Empirical Data in a Neural Network Method for Mineral-Potential Mapping

Use of GIS layers, in which the cell values represent fuzzy membership variables, is an effective method of combining subjective geological knowledge with empirical data in a neural network approach to mineral-prospectivity mapping. In this study, multilayer perceptron (MLP), neural networks are used to combine up to 17 regional exploration variables to predict the potential for orogenic gold deposits in the form of prospectivity maps in the Archean Kalgoorlie Terrane of Western Australia. Two types of fuzzy membership layers are used. In the first type of layer, the statistical relationships between known gold deposits and variables in the GIS thematic layer are used to determine fuzzy membership values. For example, GIS layers depicting solid geology and rock-type combinations of categorical data at the nearest lithological boundary for each cell are converted to fuzzy membership layers representing favorable lithologies and favorable lithological boundaries, respectively. This type of fuzzy-membership input is a useful alternative to the 1-of-N coding used for categorical inputs, particularly if there are a large number of classes. Rheological contrast at lithological boundaries is modeled using a second type of fuzzy membership layer, in which the assignment of fuzzy membership value, although based on geological field data, is subjective. The methods used here could be applied to a large range of subjective data (e.g., favorability of tectonic environment, host stratigraphy, or reactivation along major faults) currently used in regional exploration programs, but which normally would not be included as inputs in an empirical neural network approach.