广西难处理金矿固化焙烧氰化提金试验

通过对广西六梅金矿、明山金矿、金牙金矿含高砷高硫难浸金矿石进行固化焙烧—氰化提金的试验研究 ,获得了砷、硫固定率分别为 99.0 3%、97.0 4 % ,金浸出率 92 .35 %的较好指标 ,为这类难浸金矿的开发 ,展示了一种经济有效的途径     

黄金的成色

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。     

中国北西部金矿主要类型,分布规律和成矿带划分

本文较系统地总结了我国北西部金矿主要类型、矿化特征和金矿时空分布规律,在此基础上划分出4个成矿区、12条成矿带、32条成矿亚带,从而指明了找矿方向,为贯彻“以铀为主,综合找矿,多种经营,搞活地质”的方针,提供了较好的参考资料。     

火试金法测定铜精矿中金含量结果的不确定度评定

对火试金法测定铜精矿中金含量的结果进行不确定度评定。分析了铜精矿样品称量、铜精矿样品的不均匀性和配料处理,以及金粒称量等因素对金含量测量结果不确定度的影响,并得出火试金法测量铜精矿中金含量的扩展不确定度。     

豫西前河构造蚀变岩型金矿成矿过程中的流体-岩石反应

前河金矿区位于华北地台南缘,赋存在中元古界熊耳群安山岩和英安岩中,矿体受断裂破碎带控制。含矿热液在迁移过程中与围岩发生了广泛的流体-岩石反应而引起热液蚀变。本区石英中有4种类型的流体包裹体,均一温度范围为145～331℃,其中含CO2包裹体的完全均一温度主要分布在中-高温区。成矿流体的密度和压力变化范围分别是0.68～0.94g/cm3和(367.01～896.55)×105Pa。金大量沉淀成矿时的流体特征为:温度213～260℃、密度0.80～0.89g/cm3和压力(502.86～710.57)×105Pa。流体相为SO42->Na >Cl->K 型,CO2/H2O比值及N2、H2S、Ar、C2H6等挥发分的含量明显增高,f(CO2)、f(H2S)、f(CH4)和Eh值增大;f(O2)、f(H2O)和pH值减小。在青磐岩化安山岩的基础上发生的流体-岩石反应是造成本矿床金沉淀成矿的最主要原因。     

湖南雪峰山地区沈家垭金矿成矿学及年代学研究

湘西沈家垭大型金矿是雪峰山地区颇具代表性的金矿床介绍,矿体分布于新元古界板溪群马底驿组第四岩性段中,矿化作用严格受北东东向沃溪和香草湾等深大断裂和唐浒坪复式背斜的联合控制。本次研究获得该矿床含金石英脉RbSr等时线年龄为90.6±3.2Ma,表明成矿作用发生于晚白垩世,成矿作用可能与燕山期区域性大规模的逆冲推覆作用密切相关,矿床成因类型为构造热液型。     

江西省德兴铜矿矿区重金属元素的环境效应

本文系统研究了德兴铜矿排石场和尾砂库的环境问题,以环境介质（水土植物）中重金属元素含量为研究对象,论述矿区重金属的环境效应。研究结果表明祝家村低品位矿石堆浸场淋滤产生的酸性废水是造成大坞河流域重金属污染的主要来源。大坞河上游水体中Cu元素含量高达14506μg/L,是国家Ⅲ级水标准的14倍之多,Zn元素含量高达2938μg/L,是国家Ⅲ级水标准的2.9倍,同时pH值在3~4范围内;到中下游水体中Cu元素含量减小到几千到几百μg/L,水质有所改善。大坞河沿岸上游和中游土壤重金属含量受河水影响,随着与河岸距离的增加而减小。同时水稻中Pb元素含量是国家粮食标准的2倍。推测4#尾砂库尾砂表层氧化带深度大于80cm;而1#尾砂库库内尾砂中氧化带估计在0~25cm处。推测两个尾砂库产酸能力小于酸中和能力,故坝底水中pH值在7左右,对周围水体影响较小。与4#尾砂库距离近的石墩头村稻田表层土壤中Cu、Mo元素含量较高,远离尾砂库土壤中重金属含量降低。同时4#尾砂库周围土壤中Cd、Pb、Cu元素的吸附态、碳酸盐态比例在20%左右,因而在酸性环境下较容易被植物吸收。1#尾砂库矿建村种植的小白菜中Pb元素含量超过国家蔬菜标准的4倍,Cu、Pb、Zn元素含量严重超过背景值。     

Case history of controlling a landslide at Panluo open-pit mine in China

Controlling of landsides safely and economically is a great challenge to mine operators because landslides are major geological problems especially in open-pit mines. In this paper, a case history at Panluo open-pit mine is presented in detail to share the experiences and lessons with mine operators. Panluo open-pit mine is located in the southwestern Fujian province of China. It is the largest open-pit iron mine in the Fujian province and was planned in 1965 and is in full operation from 1978. In July 1990, an earthquake of magnitude 5.3 in Taiwan Strait and big rainstorms impacted the mine slope, causing tension cracks and rather large-scale failures, and forming a U-shaped landslide. Total potential volume was estimated to be up to 1.0 × 10⁶ m³. This directly threatened the mine production. In order to protect the mine production and the dwellers’ safety around, a dynamic comprehensive method was implemented including geotechnical investigations, in-situ testing and monitoring, stability analysis, and many mitigation and preventive measures. These measures slowed down the development and further occurrence of the landslide. The results showed that the landslides were still active, it was slowed with the control measures and moved rapidly with rainfall and mining down. However, no catastrophic accidents occurred and the pit mining was continued till it was closed at the elevation of 887 m in 2000. As a successful case of landslide control at an open-pit mine for 10 years, this paper reports the controlling measures in details. These experiences of landslide control may be beneficial to other similar mines for landslide control.