A search for the optical and near-infrared counterpart of the accreting millisecond X-ray pulsar XTE J1751−305

We have obtained optical and near-infrared images of the field of the accreting millisecond X-ray pulsar XTE J1751−305. There are no stars in the 0.7-arcsec error circle (0.7 arcsec is the overall uncertainty arising from tying the optical and X-ray images and from the intrinsic uncertainty in the Chandra X-ray astrometric solution). We derive limiting magnitudes for the counterpart of   R > 23.1, I > 21.6, Z > 20.6, J > 19.6  and   K > 19.2  . We compare these upper limits with the magnitudes one would expect for simple models for the possible donor stars and the accretion disc subject to the reddening observed in X-rays for XTE J1751−305 and when put at the distance of the Galactic Centre (8.5 kpc). We conclude that our non-detection does not constrain any of the models for the accretion disc or possible donor stars. Deep, near-infrared images obtained during quiescence will, however, constrain possible models for the donor stars in this ultracompact system.     

A weak outburst of the millisecond X-ray pulsar SAX J1808.4-3658 in October 1996 as detected from RXTE slew data

Analysis of the RXTE slew data in October 1996 revealed a weak X-ray burst from the millisecond pulsar SAX J 1808.4-3658. The 3–20-keV energy spectrum of the source can be described by a power law with an index of 2.0 and a(3-to 20 keV) luminosity of ～1.4×10³⁵ erg s^?1 (the distance to the source was taken to be 2.5 kpc). Because of the short exposure time, we failed to detect weak pulsations at a frequency of 401 Hz in the source. The (2σ) upper limit of the pulse fraction is ～13%.     

鹧鸪菜组织和细胞培养的研究Ⅳ.藻体任意碎片的培养与损伤藻体再生的观察

把鹧鸪菜藻体切成大小不同的切段、以及任意切碎,培养于添加氮、磷素的消毒海水中,后者分10℃、15℃、20℃、25℃四种不同温度条件培养,结果全部切段、切碎片都很快再生出假根附着于基质,并再生出一至多个叶状体;叶状体长大后从基部长出新的假根成为完整的幼苗(再生苗)。试验表明,大的切段其再生苗生长快、长度大,但出苗率(一定长度的藻体长出再生苗数量)低。培养温度较高时(20—25℃),藻体任意切碎片再生速度快、附着速度快、数量多且较牢固。利用藻体切碎片来培养鹧鸪菜幼苗是可行的;培养的适宜温度为20℃以上、海水比重为1.010左右。本文还对鹧鸪菜损伤藻体再生的情况(繁殖生殖学)进行一些观察和描述。     

Methodical series tests for fuller ship hull forms

In recent years many fuller ship hull forms have been designed and constructed in various shipbuilding countries, but the data available for the development of the fuller forms are inadequate from the point of view of preliminary ship design. In this paper the authors describe how they have systematically tested vessel forms of block coefficients ranging from 0.80 to 0.90. The analysis and presentation of the test results have been made in such a manner that designers can produce hull forms like those of tankers and other bulk carriers quickly and reliably.     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

政府办公自动化系统建设和应用浅谈

本文简要地介绍了办公自动化的发展过程,分析了其常用的功能、特点,以及内容分类,论述了目前办公自动化系统的技术支撑和实现,并指出政府办公自动化系统在开发和应用中存在的问题和解决思路。对系统的推广使用具有一定的参考意义。     

水化学指标表示裘布依公式的应用

从多矿物溶解化学动力学方程出发,推演并建立了由水化学指标表示的承压二维井流裘布依公式。结合水文地质、水文地球化学特征,列举了水文地质单元内不同区带、各种代表性矿物及相应组分化学指标的基本表达式。以山西省太原西峪煤矿所需解决的水文地质问题为例进行了定量研究与评价,其结果与已有的抽水试验资料接近,为矿井涌水量的评价开辟了一条新的道路。从事实上进一步论证了水化学指标表示裘布依公式的理论概括是正确的。     

基于J2EE的分布式WebGIS研究

在对比分析传统的WebGIS各种实现模式优缺点的基础上，探讨了利用企业级J2EE技术实现分布式WebGIS的解决方案，使WebGIS更好地满足企业级应用的需要。     

成岩作用与油气侵位对砂岩铀成矿的约束--以准南硫磺沟地区头屯河组砂岩铀成矿为例

为了解准噶尔盆地南缘硫磺沟地区中侏罗统头屯河组砂岩成岩-流体演化与铀成矿响应,进而客观评价其成矿潜力。通过光薄片鉴定、X衍射、扫描电镜分析得出:目的层主要为岩屑细砂岩,依次经历了浅埋藏、深埋藏和表生-热液成岩阶段,遭受较强的机械压实、胶结及溶蚀作用。其黏土矿物以高岭石为主,碳酸盐矿物有细亮晶和泥晶两类,硅质胶结微弱,局部见细晶黄铁矿及其褐铁矿氧化产物。成岩环境可能经历了由酸性到弱碱性再到酸性,由同生期氧化-浅埋期还原-短暂抬升期氧化还原过渡-缓慢沉降期还原增强-快速抬升期氧化的演化过程。砂岩中存在较多油气包裹体;酸解总烃为5.72~449.14 μL/kg,以CH₄为主;方解石脉δ13C_V-PDB为-25‰~-6.7‰,δ18O_V-SMOW为11.1‰~18.9‰;结合野外调查认为目的层存在一期中等偏弱的后生油气侵位,从而影响了砂体的Eh及pH值。以上成岩过程及烃类流体活动使得目的层早期形成了小型层间氧化带型铀矿并得以局部保存,晚期形成了一定规模的地表潜水氧化带型铀矿体。