洋壳深俯冲超高压变质作用研究及其地质意义

洋壳深俯冲经历超高压变质作用的岩石比较稀少,是目前超高压变质作用研究的重要前沿领域,有关这方面的研究对于建立新的冷俯冲带变质作用类型、探讨地幔水流体的成因、建立更广泛的超高压变质岩石的抬升机制具有重要意义。另外,洋壳深俯冲高压变质带往往与低压高温变质带组成双变质带,对双变质带的深入研究对于完整地重塑俯冲碰撞造山带的形成演化过程具有重要意义。简要地介绍了新疆西天山洋壳深俯冲超高压变质带的研究现状和存在的问题。     

P–T paths reconstruction of a collisional event: The example of the Thiviers-Payzac Unit in the Variscan French Massif Central

Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P–T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times (ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P–T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P–T path shows that the regional D2 event corresponds to crustal thickening.     

印度与亚洲板块碰撞及碰撞时限的新证据——日喀则卡堆蓝片岩Ar-Ar定年

几十年来,关于印度板块与亚洲板块碰撞启动和完成碰撞的时间,科学家们从不同的角度给予解释并建立了多种模式。高压变质带是板块碰撞过程中重要的事件记录,高压矿物的变质年龄是确定板块碰撞时间最直接的方法之一。从雅鲁藏布江缝合带南侧卡堆蓝片岩的蓝闪石中获得59.29Ma±0.83Ma的Ar-Ar加权平均年龄,是目前雅鲁藏布江高压变质带唯一的蓝闪石年龄。该年龄与利用海相沉积、最高海相层位、地层古生物、古地磁等研究方法获得的结论相吻合,印度河-雅鲁藏布江缝合带的闭合时间应在59Ma左右,也是洋壳消亡和印度与亚洲板块碰撞的时间约束。     

Age constraints on the evolution of the Austroalpine basement to the south of the Tauern Window

The Austroalpine basement to the south of the Tauern Window once was part of the northern margin of Gondwana. It includes the “Altkristallin” and the phyllitic Thurntaler Complex. In the Altkristallin (AMU, MPU), suites of arc-related metamafic sequences occur together with calc-alkaline metagranite. SHRIMP U–Pb dating of zircon from calc-alkaline metagranite associated with an eclogitic amphibolite give an age of 470 ± 3 Ma interpreted as the age of protolith emplacement. In the Thurntaler Complex, metaporphyroids occur together with tholeiitic as well as alkaline within-plate basalt-type metabasite. The metaryholites of this association give a crystallization SHRIMP age of 477 ± 4 Ma, which suggests contemporaneity of arc-related and extensional settings in the Austroalpine basement units. The age data demonstrate widespread magmatic activity associated with the Early-Ordovician amalgamation at the end of the 550–470 Ma subduction–accretion–collision cycle. The Pb–Pb and U–Pb systematics of step-wise leached staurolite and kyanite from the peak-metamorphic assemblage of the Altkristallin indicate that (1) step-wise leaching of staurolite and kyanite yields the age of inclusions rather than the host; (2) zircon inclusions in staurolite suggest an Ordovician or older age for the precursor of the staurolite-schists; (3) the weighted average of the ²⁰⁶Pb/²³⁸U data of the various leaching steps yields a Variscan age for the inclusions (ilmenite, biotite, and andesine). Since these inclusions are part of the metamorphic mineral assemblage, this age provides a minimum estimate for staurolite growth, i.e., metamorphism. Thus, the Pb–Pb and U–Pb systematics of staurolite provide evidence for a Variscan metamorphism of the Austroalpine basement, e.g., MPU, AMU and Thurntaler Complex, to the south of the Tauern Window.     

Rock relationships in the Mogok metamorphic belt, Tatkon to Mandalay, central Myanmar

The Mogok metamorphic belt (MMB), over 1450 km long and up to 40 km wide, consists of regionally metamorphosed rocks including kyanite and sillimanite schists and granites lying along the Western margin of the Shan Plateau in central Myanmar and continuing northwards to the eastern Himalayan syntaxis. Exposures in quarries allow correlation of Palaeozoic meta-sedimentary, early Mesozoic meta-igneous and late Mesozoic intrusive rocks within a 230 km long northerly-trending segment of the MMB, from Tatkon to Kyanigan north of Mandalay, and with the Mogok gemstone district 100 km to the northeast. Relationships among the metamorphic and intrusive rocks, with sparse published radiometric age controls, indicate at least two metamorphic events, one before and one after the intrusion of Late Jurassic to early Cretaceous calc-alkaline rocks. These relationships can be explained by either of two possible tectonic histories. One, constrained by correlation of mid-Permian limestones across Myanmar, requires early Permian and early Jurassic regional metamorphic events, prior to an early Tertiary metamorphism, in the western part of but within a Shan-Thai – western Myanmar block. The second, not compatible with a single laterally continuous Permian limestone, requires pre-Upper Jurassic regional metamorphism and orogenic gold mineralization in the Mergui Group and western Myanmar, early Cretaceous collision of an east-facing Mergui-western Myanmar island arc with the Shan Plateau, and early Tertiary metamorphism in the MMB related to reversal in tectonic polarity following the arc-Plateau collision.     

Geology of the Gorny Altai subduction–accretion complex, southern Siberia: Tectonic evolution of an Ediacaran–Cambrian intra-oceanic arc-trench system

The Gorny Altai region in southern Siberia is one of the key areas in reconstructing the tectonic evolution of the western segment of the Central Asian Orogenic Belt (CAOB). This region features various orogenic elements of Late Neoproterozoic–Early Paleozoic age, such as an accretionary complex (AC), high-P/T metamorphic (HP) rocks, and ophiolite (OP), all formed by ancient subduction–accretion processes. This study investigated the detailed geology of the Upper Neoproterozoic to Lower Paleozoic rocks in a traverse between Gorno-Altaisk city and Lake Teletskoy in the northern part of the region, and in the Kurai to Chagan-Uzun area in the southern part. The tectonic units of the studied areas consist of (1) the Ediacaran (=Vendian)–Early Cambrian AC, (2) ca. 630 Ma HP complex, (3) the Ediacaran–Early Cambrian OP complex, (4) the Cryogenian–Cambrian island arc complex, and (5) the Middle Paleozoic fore-arc sedimentary rocks. The AC consists mostly of paleo-atoll limestone and underlying oceanic island basalt with minor amount of chert and serpentinite. The basaltic lavas show petrochemistry similar to modern oceanic plateau basalt. The 630 Ma HP complex records a maximum peak metamorphism at 660 °C and 2.0 GPa that corresponds to 60 km-deep burial in a subduction zone, and exhumation at ca. 570 Ma. The Cryogenian island arc complex includes boninitic rocks that suggest an incipient stage of arc development. The Upper Neoproterozoic–Lower Paleozoic complexes in the Gorno-Altaisk city to Lake Teletskoy and the Kurai to Chagan-Uzun areas are totally involved in a subhorizontal piled-nappe structure, and overprinted by Late Paleozoic strike-slip faulting. The HP complex occurs as a nappe tectonically sandwiched between the non- to weakly metamorphosed AC and the OP complex. These lithologic assemblages and geologic structure newly documented in the Gorny Altai region are essentially similar to those of the circum-Pacific (Miyashiro-type) orogenic belts, such as the Japan Islands in East Asia and the Cordillera in western North America. The Cryogenian boninite-bearing arc volcanism indicates that the initial stage of arc development occurred in a transient setting from a transform zone to an incipient subduction zone. The less abundant of terrigenous clastics from mature continental crust and thick deep-sea chert in the Ediacaran–Early Cambrian AC may suggest that the southern Gorny Altai region evolved in an intra-oceanic arc-trench setting like the modern Mariana arc, rather than along the continental arc of a major continental margin. Based on geological, petrochemical, and geochronological data, we synthesize the Late Neoproterozoic to Early Paleozoic tectonic history of the Gorny Altai region in the western CAOB.     

Metamorphism of the Central Anatolian Crystalline Complex, Turkey: influence of orogen-normal collision vs. wrench-dominated tectonics on P–T–t paths

The Central Anatolian Crystalline Complex (CACC) is a microcontinent in the Alpine–Himalayan belt. It has previously been considered as a coherent structural entity, but, although the entire CACC is comprised of similar rocks (primarily metasedimentary rocks and granitoids), it consists of at least four tectonic blocks characterized by different P–T–t paths. These blocks are the K?r?ehir (north‐west), Akda? (north‐east), Ni?de (south) and Aksaray (west) massifs. The northern massifs experienced thrusting and folding during collision and were slowly exhumed by erosion; metamorphic rocks are characterized by clockwise P–T paths at moderate P–T and local low‐P–high‐T (LP–HT) overprinting in the highest grade rocks. Apatite fission track ages are Eocene to Oligocene (47–32 Ma). The Aksaray block represents the hot, shallow mid‐crust of a Late Cretaceous–early Tertiary arc. It is dominated by intrusions; rare metapelitic rocks record low‐P (< 4 kbar) regional metamorphism overprinted by LP–HT contact metamorphism. Apatite fission track ages are 50–45 Ma. The Ni?de massif is different from the other CACC blocks because it evolved as a core complex in a wrench‐dominated setting. It is characterized by clockwise P–T paths at moderate P–T followed by widespread LP–HT metamorphism. Apatite fission track ages are Miocene (12–9 Ma), significantly younger than those in the northern massifs. Ni?de rocks resided in the mid‐crust at a time when the rest of the CACC was at or near the Earth's surface. Variations in P–T–t and tectonic histories — especially timing of exhumation — between the northern and southern CACC reflect the difference between head‐on collision vs. mid‐crustal wrenching.     

The Higo metamorphic complex in Kyushu, Japan as the fragment of Permo–Triassic metamorphic complexes in East Asia

The Higo terrane in west-central Kyushu Island, southwest Japan consists from north to south of the Manotani, Higo and Ryuhozan metamorphic complexes, which are intruded by the Higo plutonic complex (Miyanohara tonalite and Shiraishino granodiorite).The Higo and Manotani metamorphic complexes indicate an imbricate crustal section in which a sequence of metamorphic rocks with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The metamorphic rocks in these complexes can be divided into five metamorphic zones (zone A to zone E) from top to base (i.e., from north to south) on the basis of mineral parageneses of pelitic rocks. Greenschist-facies mineral assemblages in zone A (the Manotani metamorphic complex) give way to amphibolite-facies assemblages in zones B, C and D, which in turn are replaced by granulite-facies assemblages in zone E of the Higo metamorphic complex. The highest-grade part of the complex (zone E) indicates peak P–T conditions of ca. 720 MPa and ca. 870 °C. In addition highly aluminous Spr-bearing granulites and related high-temperature metamorphic rocks occur as blocks in peridotite intrusions and show UHT-metamorphic conditions of ca. 900 MPa and ca. 950 °C. The prograde and retrograde P–T evolution paths of the Higo and Manotani metamorphic complexes are estimated using reaction textures, mineral inclusion analyses and mineral chemistries, especially in zones A and D, which show a clockwise P–T path from Lws-including Pmp–Act field to Act–Chl–Epi field in zone A and St–Ky field to And field through Sil field in zone D.The Higo metamorphic complex has been traditionally considered to be the western-end of the Ryoke metamorphic belt in the Japanese Islands or part of the Kurosegawa–Paleo Ryoke terrane in south-west Japan. However, recent detailed studies including Permo–Triassic age (ca. 250 Ma) determinations from this complex indicate a close relationship with the high-grade metamorphic terranes in eastern-most Asia (e.g., north Dabie terrane) with similar metamorphic and igneous characteristics, protolith assembly, and metamorphic and igneous ages. The north Dabie high-grade terrane as a collisional metamorphic zone between the North China and the South China cratons could be extended to the N-NE along the transcurrent fault (Tan-Lu Fault) as the Sulu belt in Shandong Peninsula and the Imjingang belt in Korean Peninsula. The Higo and Manotani metamorphic complexes as well as the Hida–Oki terrane in Japan would also have belonged to this type of collisional terrane and then experienced a top-to-the-south displacement with forming a regional nappe structure before the intrusion of younger Shiraishino granodiorite (ca. 120 Ma).     

Deformation-enhanced metamorphic reactions and the rheology of high-pressure shear zones, Western Gneiss Region, Norway

Microstructural and petrological analysis of samples with increasing strain in high‐pressure (HP) shear zones from the Haram garnet corona gabbro give insights into the deformation mechanisms of minerals, rheological properties of the shear zone and the role of deformation in enhancing metamorphic reactions. Scanning electron microscopy with electron backscattering diffraction (SEM–EBSD), compositional mapping and petrographic analysis were used to evaluate the nature of deformation in both reactants and products associated with eclogitization. Plagioclase with a shape‐preferred orientation that occurs in the interior part of layers in the mylonitic sample deformed by intracrystalline glide on the (0 0 1)[1 0 0] slip system. In omphacite, crystallographic preferred orientations indicate slip on (1 0 0)[0 0 1] and (1 1 0)[0 0 1] during deformation. Fine‐grained garnet deformed by diffusion creep and grain‐boundary sliding. Ilmenite deformed by dislocation glide on the basal and, at higher strains, prism planes in the a direction. Relationships among the minerals present and petrological analysis indicate that deformation and metamorphism in the shear zones began at 500–650 °C and 0.5–1.4 GPa and continued during prograde metamorphism to ultra‐high‐pressure (UHP) conditions. Both products and reactants show evidence of syn‐ and post‐kinematic growth indicating that prograde reactions continued after strain was partitioned away. The restriction of post‐kinematic growth to narrow regions at the interface of garnet and plagioclase and preservation of earlier syn‐kinematic microstructures in older parts layers that were involved in reactions during deformation show that diffusion distances were significantly shortened when strain was partitioned away, demonstrating that deformation played an important role in enhancing metamorphic reactions. Two important consequences of deformation observed in these shear zones are: (i) the homogenization of chemical composition gradients occurred by mixing and grain‐boundary migration and (ii) composition changes in zoned metamorphic garnet by lengthening diffusion distances. The application of experimental flow laws to the main phases present in nearly monomineralic layers yield upper limits for stresses of 100–150 MPa and lower limits for strain rates of 10^?12 to 10^?13 s^?1 as deformation conditions for the shear zones in the Haram gabbro that were produced during subduction of the Baltica craton and resulted in the production of HP and UHP metamorphic rocks.