The application of range of variability approach to the assessment of a check dam on riverine habitat alteration

This report uses the intermediate disturbance hypothesis to assess the influence of constructing a check dam on river environment. HEC-HMS and HEC-RAS programs were used to generate hydraulic parameters such as flow discharge, water depth, velocity, water surface width and sediment discharge. Indicators of hydrologic alteration (IHA) and indicator of habitat alteration (IHabA) were used to evaluate the flow and habitat conditions before and after check dam construction. The range of variability approach was used to calculate the degree of hydrologic alteration for each IHA, degree of habitat alteration and overall alteration for IHabA. Variability of river habitats before and after check dam construction was contrasted. Alteration became larger the closer to the dam body. An assessment method for check dam construction is offered which does not require ecological investigation data and combines ecology concepts and hydraulics.     

Yerranderie a Late Devonian Silver–Gold–Lead Intermediate Sulfidation Epithermal District, Eastern Lachlan Orogen, New South Wales, Australia

Felsic volcanic units of the Early Devonian Bindook Volcanic Complex host the Yerranderie epithermal silver–gold–lead district 94 km west–southwest of Sydney. Mineralization in the district forms part of a fault‐controlled, intermediate sulfidation, epithermal silver–gold–base metal vein system that has significant mineral and alteration zonation. Stage 1 of the mineral paragenesis in the veins developed quartz and carbonate with early pyrite, whereas stage 2 is a crustiform banded quartz–pyrite–arsenopyrite assemblage. Stage 3, the main stage of sulfide deposition, comprises early sphalerite, followed by a tetrahedrite–tennantite–gold assemblage, then a galena–chalcopyrite–native silver–pyrite assemblage, and finally a pyrargyrite–polybasite–pearceite assemblage. Stage 4 involves the deposition of quartz veins with minor (late) pyrite and stage 5 is characterized by siderite that infilled remaining voids. Mineral zonation occurs along the Yerranderie Fault, with bornite being restricted to the Colon Peaks–Silver Peak mine area, whereas arsenopyrite, which is present in both the Colon Peaks–Silver Peak and Wollondilly mine areas, is absent in other lodes along the Yerranderie Fault. The Yerranderie Fault, which hosts the major lodes, is surrounded by a zoned alteration system. With increasing proximity to the fault the intensity of alteration increases and the alteration assemblage changes from an outer quartz–muscovite–illite–(ankerite) assemblage to a quartz–illite–(pyrite–carbonate) assemblage within meters of the fault. ⁴⁰Ar/³⁹Ar dating of muscovite from the alteration zone gave a 372.1 ± 1.9 Ma (Late Devonian) age, which is interpreted to be the timing of the quartz–sulfide vein formation. Sulfur isotope values for sulfides range from 0.1 to 6.2‰ with one outlier of ?5.6 δ³⁴S‰. The results indicate that the initial ore‐forming fluids were reduced, and that sulfur was probably sourced from a magmatic reservoir, either as a direct magmatic contribution or indirectly through dissolution and recycling of sulfur from the host volcanic sequence. The sulfur isotope data suggest the system is isotopically zoned.     

Behavior of Major and Trace Elements during Ore Deposition: Example from the Low-Sulfidation Pantingan Gold System, Mount Mariveles, Bataan, Philippines

The evaluation of the relatively fresh host rock and altered rock samples associated with the Pantingan Gold System exposed in Mount Mariveles, Bataan yield several notable observations that are useful in pinpointing potential gold pathfinder elements. Geochemical and petrologic analysis showed that the altered rocks can be subdivided into rocks that underwent propylitic alteration (group 1), argillized rocks with silica contents similar to those of the fresh host rocks (group 2), argillized but not strongly silicified rocks (group 3) and argillized and strongly silicified rocks (group 4). Selected element ratio patterns in the altered rocks and gold concentrations in gold‐bearing quartz veins vary between the rock groups. Moreover, mass balance calculation also reflected the geochemical observations pertaining to the gains and losses of SiO_2, Fe₂O₃+ MgO, CaO + Na₂O and K₂O, which are believed to be chemical reactions (i.e. breakdown of plagioclase, silica inundation or leaching, sulfide and calcite formation) caused by the influx of hydrothermal fluids.     

Impact of the Late Triassic Dashtak intermediate detachment horizon on anticline geometry in the Central Frontal Fars,SE Zagros fold belt,Iran

Integration of 2-D seismic lines, well data and field studies allow us to determine the geometry variations of anticlines in the highly prolific Central Frontal Fars region in the SE Zagros fold belt. These variations are directly related to changes in thickness of the principal evaporitic intermediate detachment level, located along the Late Triassic Dashtak Formation. Anticlines of short wavelength contain a significant over-thickening of the evaporitic detachment level in their crestal domain that may reach 1900 m (from an original thickness of 550–800 m). Folds containing thick Dashtak evaporites show decoupling across the detachment level and, thus, a shift of the anticline crest in the underlying Permo-Triassic carbonates of the Dehram Group, which form the major gas reservoir in the Central Frontal Fars. Four main parameters control the extent and distribution of the decoupled anticlines in the study area: (a) original large thickness of the Late Triassic evaporitic basin; (b) coinciding larger amounts of anhydrites with increasing total thickness of formation; (c) parallel occurrences of abnormally high fluid pressures; and (d) shortening variations across, and along, the strike of specific folds. The present work relating the different parameters of the Dashtak evaporites with the anticline geometry allows a better understanding of the fold geometry variations with depth, which is applicable to oil and gas exploration in the SE Zagros and other similar hydrocarbon provinces characterised by intermediate detachment horizons.     

Porphyry to epithermal transition in the Agua Rica polymetallic deposit, Catamarca, Argentina: An integrated petrologic analysis of ore and alteration parageneses

Agua Rica (27°26′S–66°16′O) is a world class Cu–Au–Mo deposit located in Catamarca, Argentina. In the E–W 6969400 section examined, the Seca Norte and the Trampeadero porphyries that have intruded the metasedimentary rock are cut by interfingered igneous and hydrothermal heterolithic and monolithic breccias, and sandy dikes. Relic biotite and K-feldspar of the early potassic alteration (370° to > 550 °C) with Cu (Mo–Au) mineralization are locally preserved and encapsulated in a widespread, white mica + quartz + rutile or anatase halo (phyllic alteration) with pyrite + covellite that suggests fluids with temperatures ≤ 360 °C and high f(S₂). The Trampeadero porphyry and the surrounding metasedimentary rock with phyllic alteration have molybdenite in stringers and B-type quartz veinlets and the highest Mo grades (> 1000 ppm).Multistage advanced argillic alteration overprinted the earlier stages. Early andalusite ± pyrite ± quartz is preserved in the roots of the argillic halo rimmed by an alumina–silica material and white micas. This alteration assemblage is considered to have been formed at temperatures ≥ 375 °C from condensed magmatic vapor. At higher levels, pyrophyllite replaces muscovite and illite in clasts of hydrothermal breccias in the center and east sector of the study section, suggesting temperatures of 280 to 360 °C. Clasts of vuggy silica in the uppermost levels of the central breccia, indicates that at lower temperatures (< 250 °C), fluids reached very low pH (pH < 2). In this early stage of the advanced argillic alteration, hydrothermal fluids seem to have not precipitated sulfides or sulfosalts.Hydrothermal brecciation was concurrent with fluid exsolution (↑? V), which precipitated intermediate-temperature advanced argillic alunite (svanbergite + woodhouseite) ± diaspore ± zunyite as breccia cement along with abundant covellite + pyrite + enargite ± native sulfur ± kuramite at intermediate depths and in lateral transitional zones to unbrecciated rocks. This mineral assemblage indicates temperatures near 300 °C, oxidized and silica-undersaturated hydrothermal fluids with high sulfur fugacity to prevent gold precipitation. Multiple generations of pyrite, emplectite, colusite, Pb- and Bi-bearing sulfosalts, and native sulfur with Au and Ag, accompanied by alunite introduction in the upper level breccias, probably occurred at lower temperatures, but still high sulfur and oxygen activity. An independent Zn and Pb (as galena) mineralization stage locally coincides with Au–Ag and sulfosalts, and advanced at depth, controlled by fractures and overprinting much of the previous mineralization. A later paragenesis of veinlets of alunite + woodhouseite + svanvergite + pyrite ± enargite that cut the phyllic halo suggests temperatures ~ 250 °C and without woodhouseite + svanvergite, temperatures ~ 200 °C. Kaolinite occurs in the phyllic halo as a late mineral in clots and in veinlets thus, in this zone, the fluid had cooled enough for its formation.     

河南省皇城山高硫化型浅成低温热液型银矿床识别特征及其找矿意义

经过详细的野外勘查和热液蚀变、矿物标型特征研究,并结合稳定同位素研究资料综合分析,首次提出皇城山银矿床为浅成低温热液矿床中的高硫化型矿床。该矿床以发育多孔状石英岩的硅化带和高级泥化带为特征,组成矿石的金属硫化物以黄铁矿、铜蓝和辉铜矿等高硫金属硫化物组合为标志。矿石中闪锌矿的低Fe高T1和强内反射显示低温闪锌矿标型特征。...     

Fluid Inclusion and Stable Isotope Studies at Don Sixto,a Precious Metal Low Sulfidation Deposit in Mendoza Province,Argentina

The Don Sixto mining area in Mendoza province, central‐western Argentina, contains an epithermal low sulfidation Au–Ag deposit. It is a small deposit (～4 km²), with a gold resource of 36 t. In Don Sixto, ore minerals are disseminated in the hydrothermal quartz veins and hydrothermally altered volcanic‐pyroclastic rock units of Permian–Triassic age. On the basis of the texture, ore mineral paragenesis and cross cutting relationship of gangue minerals, seven stages of mineralization were recognized and described. The first six stages are characterized by quartz veins with minor amounts of base metal minerals and the last stage is represented by fluorite veins with minimal quantities of base metal minerals; the precious metal mineralization is mainly related to the fourth stage. The hydrothermal veins exhibit mainly massive, crustiform and comb infilling textures; the presence of bladed quartz replacement textures and quartz veins with adularia crystals are indicative of boiling processes in the system. Fluid inclusion and complementary stable isotope studies were performed in quartz, fluorite, and pyrite samples from the vein systems. The microthermometric data were obtained from primary, biphasic (liquid‐vapor) fluid inclusion assemblages in quartz and fluorite. The maximum values for salinity and homogenization temperature (T_h) came from the stage IV where quartz with petrographic evidence of boiling has average values of 4.96 wt% NaCl_equiv. and 286.9°C respectively. The lower values are related to the last stage of mineralization, where the fluid inclusions in fluorite have average salinities of 1.05 wt% NaCl_equiv. and average homogenization temperatures of 173.1°C. The oxygen and sulfur isotopic fractionation was analyzed in quartz and pyrite. The calculated isotopic fractionation for oxygen in the hydrothermal fluid is in the range of δ¹⁸O_H2O = ?6.92 up to ?3.08‰, which indicates dominance of a meteoric source for the water, while sulfur reaches δ³⁴S_H2S = 1.09‰, which could be reflecting a possible magmatic, or even a mixed source.     

环南澳大利亚太平洋-印度洋海洋间南极中层水环流

On the basis of the salinity distribution of isopycnal(σ_0=27.2 kg/m~3) surface and in salinity minimum, the Antarctic Intermediate Water(AAIW) around South Australia can be classified into five types corresponding to five regions by using in situ CTD observations. Type 1 is the Tasman AAIW, which has consistent hydrographic properties in the South Coral Sea and the North Tasman Sea. Type 2 is the Southern Ocean(SO) AAIW, parallel to and extending from the Subantarctic Front with the freshest and coldest AAIW in the study area. Type 3 is a transition between Type 1 and Type 2. The AAIW transforms from fresh to saline with the latitude declining(equatorward). Type 4, the South Australia AAIW, has relatively uniform AAIW properties due to the semienclosed South Australia Basin. Type 5, the Southeast Indian AAIW, progressively becomes more saline through mixing with the subtropical Indian intermediate water from south to north. In addition to the above hydrographic analysis of AAIW, the newest trajectories of Argo(Array for real-time Geostrophic Oceanography) floats were used to constructed the intermediate(1 000 m water depth) current field, which show the major interocean circulation of AAIW in the study area. Finally, a refined schematic of intermediate circulation shows that several currents get together to complete the connection between the Pacific Ocean and the Indian Ocean. They include the South Equatorial Current and the East Australia Current in the Southwest Pacific Ocean, the Tasman Leakage and the Flinders Current in the South Australia Basin, and the extension of Flinders Current in the southeast Indian Ocean.     

西藏林子宗群火山岩中首次发现低硫化型浅成低温热液型矿床——以斯弄多银多金属矿为例

西藏冈底斯成矿带分布着大面积古近纪(70–40 Ma)林子宗群火山岩。但如此强烈的火山-岩浆作用,与安第斯成矿带相比(如马力昆带(Franja de Maricunga)、印地—帕斯瓜带(Franja El Indio-Pascua)),除了碰撞伸展阶段形成的驱龙、甲玛等斑岩-矽卡岩型铜多金属矿床外(23–13 Ma),"缺位"资源规模大、经济价值高的浅成低温热液型矿床成矿亚系列。该类矿床是剥蚀了,还是没有发现?本文在前人工作基础上,通过详细的地质勘探、地质填图、地质编录、镜下鉴定、能谱和电子探针分析,在南木林盆地斯弄多地区林子宗群陆相火山岩中识别出低硫化浅成低温热液型银铅锌(铟镉金)矿床。矿体由产于流纹斑岩中的隐爆角砾岩型银铅锌矿体、火山机构旁侧的热液脉型银铅锌矿体及断裂上盘的银(铅锌)矿体组成,目前控制Pb+Zn资源量超过30万吨(331+332为主)@Pb+Zn5%,Ag资源量超过400吨@Ag50 g/t。主要金属矿物为方铅矿、闪锌矿、辉银矿、硫砷铜银矿、黄铁矿,微量黄铜矿,主要蚀变组合为:石英-玉髓-碧玉,重晶石-萤石,冰长石-伊利石-绢云母,菱铁矿-菱锰矿;矿石构造以脉状、角砾状、网脉状、条带状、层纹状、皮壳状、块状、浸染状等,发育结晶作用和交代作用形成的矿石结构;近地表发育古热泉喷口,堆积条带状、层纹状硅质沉积物。综合上述地质信息,确定该矿床为典型低硫化浅成低温热液型银多金属矿床。这一重要矿床类型的发现和确定在冈底斯成矿带乃至西藏特提斯成矿省尚属首例,对冈底斯成矿带广泛发育形成于70~40 Ma的林子宗群火山岩地区区域找矿具有积极和重要的指导意义,其重要性不容低估。