Sedimentary characteristics and the implications of cobalt-rich crusts resources at Caiwei Guyot in the Western Pacific Ocean

Abstract

Cobalt-rich crust has attracted increased attention due to their economic value. Studies have indicated that seamounts in the Western Pacific Ocean are rich in cobalt-rich crust resources. The Caiwei Guyot in Western Pacific Ocean is one of the cobalt-rich crust exploration areas contracted between China and the International Seabed Authority. A large volume of research has been conducted to elucidate the tectonic evolution, basement type, sediment type, gravity and magnetic anomaly characteristics, and geochemical characteristics of shallow surface sediments at Caiwei Guyot. However, a research gap exists on the sedimentary strata below the pelagic deposits and above the volcanic basement of the Caiwei Guyot. This paper summarizes that two main types of sediments existing on the top of Caiwei Guyot. The deposition thickness on the top of Caiwei Guyot is characterized by three sedimentary centers and exposed periphery. Pelagic sediments are difficult to form at the northeastern portion and edge area of Caiwei Guyot due to the strong bottom current environment, which makes these areas suitable for crust growth. This paper delineated three cobalt-rich crust prospective areas at the Caiwei Guyot with of significant implications for exploration and mining-lease-block selections at Caiwei Guyot.     

水平孔钻渣运移机理研究

有效地排除钻渣是钻井液的主要功能之一。本文结合实验及相关工程情况,从力学角度对水平孔中钻渣的运移机理及相关影响因素进行分析,采用牛顿力学定律对钻渣在钻井液中的运移速度进行了解析建模。     

泥浆性能对定向钻进铺管孔壁稳定性的影响

本文通过对泥浆性能的分析,特别是对泥浆流变参数的控制与调节在定向钻进非开挖铺管中的作用及其护壁原理的分析,简要阐述了泥浆性能对定向钻进铺管孔壁稳定性的影响,对非开挖定向钻进铺管施工有一定的指导意义。     

Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

Mirdita Zone ophiolites and associated sediments in Albania reveal Neotethys Ocean origin

The Mirdita Ophiolite Zone in Albania is associated with widespread mélanges containing components of up to nappe-size. We dated matrix and components of the mélange by radiolarians, conodonts, and other taxa. The components consist of radiolarites, pelagic limestones and shallow-water limestones, all of Triassic age, as well as ophiolites. Triassic radiolarite as a primary cover of ophiolite material proves Middle Triassic onset of Mirdita ocean-floor formation. The mélange contains a turbiditic radiolarite-rich matrix (“radiolaritic flysch”), dated as Late Bajocian to Early Oxfordian. It formed as a synorogenic sediment during west-directed thrusting of ophiolite and sediment-cover nappes representing ocean floor and underplated fragments of the western continental margin. The tectonic structures formed during these orogenic events (“Younger Kimmeridian or Eohellenic Orogeny”) are sealed by Late Jurassic platform carbonates. The geological history conforms with that of the Inner Dinarides and adjoining areas; we therefore correlate the Mirdita-Pindos Ophiolite Zone with the Vardar Zone and explain its present position by far-distance west-directed thrusting.     

Measurements of peroxyacetylnitrate in the marine boundary layer over the Atlantic

The atmospheric concentration of peroxyacetylnitrate (PAN) was measured during a cruise of the R.S. Polarstern from Bremerhaven (Germany) to Rio Grande do Sul (Brazil) in September/ October 1988. The measurements were made in-situ by a combination of electron capture gaschromatography with a cryogenic preconcentration step. The theoretical lower limit of detection (3) was 0.4 ppt. The mixing ratios of PAN varied by more than three orders of magnitude from 2000 ppt in the English Channel to less than 0.4 ppt south of the Azores (38° N). South of 35° N, PAN levels were below the detection limit, except at 30–31° S off the eastern coast of South America. Here, PAN mixing ratios of 10 to 100 ppt were detected in continentally influenced air masses. Detectable levels of PAN were mostly observed in air masses of continental or high northern origin. Changes in the wind directions were usually associated with substantial changes in the PAN mixing ratios.     

Seasonal variation of atmospheric dimethylsulfide at Amsterdam Island in the southern Indian Ocean

Daily measurements of atmospheric concentrations of dimethylsulfide (DMS) were carried out for two years in a marine site at remote area: the Amsterdam Island (37°50S–77°31E) located in the southern Indian Ocean. DMS concentrations were also measured in seawater. A seasonal variation is observed for both DMS in the atmosphere and in the sea-surface. The monthly averages of DMS concentrations in the surface coastal seawater and in the atmosphere ranged, respectively, from 0.3 to 2.0 nmol l^-1 and from 1.4 to 11.3 nmol m^-3 (34 to 274 pptv), with the highest values in summer. The monthly variation of sea-to-air flux of DMS from the southern Indian Ocean ranges from 0.7 to 4.4 mol m^-2 d^-1. A factor of 2.3 is observed between summer and winter with mean DMS fluxes of 3.0 and 1.3 mol m^-2 d^-1, respectively.     

Spatial and temporal variability of Holocene temperature in the North Atlantic region

The early Holocene climate of the North Atlantic region was influenced by two boundary conditions that were fundamentally different from the present: the presence of the decaying Laurentide Ice Sheet (LIS) and higher than present summer solar insolation. In order to assess spatial and temporal patterns of Holocene climate evolution across this region, we collated quantitative paleotemperature records at sub-millennial resolution and synthesized their temporal variability using principal components analysis (PCA). The analysis reveals considerable spatial variability, most notably in the time-transgressive expression of the Holocene thermal maximum (HTM). Most of the region, but especially areas peripheral to the Labrador Sea and hence closest to the locus of LIS disintegration, experienced maximum Holocene temperatures that lagged peak summer insolation by 1000-3000 years. Many sites from the northeastern North Atlantic sector, including the Nordic Seas and Scandinavia, either warmed in phase with maximum summer insolation (11,000-9000 years ago) or were less strongly lagged than the Baffin Bay-Labrador Sea region. These spatially complex patterns of Holocene climate development, which are defined by the PCA, resulted from the interplay between final decay of the LIS and solar insolation forcing.     

Abrupt climate change: An alternative view

Hypotheses and inferences concerning the nature of abrupt climate change, exemplified by the Dansgaard-Oeschger (D-O) events, are reviewed. There is little concrete evidence that these events are more than a regional Greenland phenomenon. The partial coherence of ice core δ¹⁸O and CH₄ is a possible exception. Claims, however, of D-O presence in most remote locations cannot be distinguished from the hypothesis that many regions are just exhibiting temporal variability in climate proxies with approximately similar frequency content. Further suggestions that D-O events in Greenland are generated by shifts in the North Atlantic ocean circulation seem highly implausible, given the weak contribution of the high latitude ocean to the meridional flux of heat. A more likely scenario is that changes in the ocean circulation are a consequence of wind shifts. The disappearance of D-O events in the Holocene coincides with the disappearance also of the Laurentide and Fennoscandian ice sheets. It is thus suggested that D-O events are a consequence of interactions of the windfield with the continental ice sheets and that better understanding of the wind field in the glacial periods is the highest priority. Wind fields are capable of great volatility and very rapid global-scale teleconnections, and they are efficient generators of oceanic circulation changes and (more speculatively) of multiple states relative to great ice sheets. Connection of D-O events to the possibility of modern abrupt climate change rests on a very weak chain of assumptions.     

Powder factors in asymmetric blast patterns

A cell powder factor defines the local powder factor in a simple geometric procedure that accounts for the charge in each blast hole and the triangulation formed by blast hole collars in a blast pattern. In the case of asymmetric blast patterns, the cell powder factor deviates from the global powder factor. Poor drilling of blast hole collars produces significant variation in the cell powder factor, more so, than does poor blast hole charging. The cell powder factor does not account for timing within a blast and does not easily handle non-parallel blast hole configurations. The cell powder factor is best used as a design or audit tool before blast holes are loaded. It gives the opportunity to correct for poor drilling and/or poor charging practices prior to firing a blast.