水压致裂煤层裂缝发育特点的研究

本文对煤岩基本力学性质、煤层水压致裂缝形成条件、裂缝形态以及裂缝开裂角方位等基本理论进行了研究与探讨，通过大量煤岩力学性质测试，证实了试验区目的层煤岩弹性模量低，泊松比较高，脆性大，易破碎，易压缩。文章还得出了目的层煤岩Ｍｏｈｒ断裂准则二次抛物线型包络线，煤层水压致裂裂缝形式判断，裂缝开裂角方位的计算公式以及有关结论。     

西北太平洋热带气旋路径时间标度律的研究

时间标度计算表明，西北太平洋热带气旋路径是一个无标度性的系统，其关联方差谱遵从频率的－２￣－３次方幂律，不同背景下的路径系统均如此。由此得到的不同季节、不同地域的热带气旋路径可预报时间尺度基本上为３￣４ｄ，但异常热带气旋路径的可预报时间尺度则为１￣２ｄ。     

冬季西北太平洋海表温度异常对太平洋风暴轴影响的数值试验

采用Ｔ２１Ｌ５大气环流模式，详细探讨了冬季西北太平洋海表温度异常对太平洋风暴轴的影响。结果表明：冬季西北太平洋暖海表温度异常能显著增强异常区北侧及下游地区的斜压性，天气尺度扰动方差、扰动动能以及涡动热量通量等也在此风暴轴入口区得到增强，由此揭示出外热源强迫对太平洋风暴轴的维持和发展起重要作用。     

石英裂变径迹蚀刻条件的对比实验研究

通过 40%的 HF溶液、KOH饱和溶液和 19 mol/L的 NaOH溶液这三种常用方法对大、小颗粒石英进行裂变径迹蚀刻实验的对比发现,用环氧树脂固定的小颗粒石英样品,不宜用 KOH饱和溶液(150 ℃)和 19 mol/L的 NaOH溶液(沸点,约 120 ℃)作为裂变径迹的蚀刻剂,宜用 40%的 HF溶液;三种方法均适宜于大颗粒石英,但不同的蚀刻方法蚀刻效率不同, 40%的 HF溶液(29 ℃)的蚀刻效率最高,且操作简单、安全性高.40%的 HF溶液最佳蚀刻时间为: 温度在 4 ℃左右(冬季)时为 40 min,温度在 29 ℃左右(夏季)时为 30 min,可在全年室内常温条件下操作.     

Numerical Simulation of Andhra Severe Cyclone (2003): Model Sensitivity to the Boundary Layer and Convection Parameterization

The Andhra severe cyclonic storm (2003) is simulated to study its evolution, structure, intensity and movement using the Penn State/NCAR non-hydrostatic mesoscale atmospheric model MM5. The model is used with three interactive nested domains at 81, 27 and 9 km resolutions covering the Bay of Bengal and adjoining Indian Peninsula. The performance of the Planetary Boundary Layer (PBL) and convective parameterization on the simulated features of the cyclone is studied by conducting sensitivity experiments. Results indicate that while the boundary layer processes play a significant role in determining both the intensity and movement, the convective processes especially control the movement of the model storm. The Mellor-Yamada scheme is found to yield the most intensive cyclone. While the combination of Mellor-Yamada (MY) PBL and Kain-Fritsch 2 (KF2) convection schemes gives the most intensive storm, the MRF PBL with KF2 convection scheme produces the best simulation in terms of intensity and track. Results of the simulation with the combination of MRF scheme for PBL and KF2 for convection show the evolution and major features of a mature tropical storm. The model has very nearly simulated the intensity of the storm though slightly overpredicted. Simulated core vertical temperature structure, winds at different heights, vertical winds in and around the core, vorticity and divergence fields at the lower and upper levels—all support the characteristics of a mature storm. The model storm has moved towards the west of the observed track during the development phase although the location of the storm in the initial and final phases agreed with the observations. The simulated rainfall distribution associated with the storm agreed reasonably with observations.     

常见砼裂缝成因判定与处理的理论研究

砼的裂缝对于砼结构是一个非常重要的问题,正确判定裂缝的成因是正确处理裂缝的前提。通常的砼裂缝成因判定存在着方法复杂、时间长、代价高等问题。通过对砼裂缝产生的根本原因的分析与研究,并从裂缝的根本特性出发,将常见的砼裂缝简化为应力裂缝和变形裂缝两类,两类裂缝具不同特性。虽然裂缝产生的具体原因不同,但只要其本质特性相同,处理的方法是基本相同的,对于其产生的具体原因可不必深究。因此对裂缝成因判定的主要工作就是判定裂缝属于应力裂缝还是变形裂缝,这大大地简化了对裂缝成因的判定过程,从而以各自适合的方法进行处理。     

近圆轨道遥感卫星星下点轨迹的计算

根据遥感卫星轨道的特点，提出了计算近圆轨道卫星星下点轨迹的算法，并对其进行精度评估。结果表明这种算法是快捷和有效的，能够满足卫星规划阶段对轨道精度的要求。     

新丰江地震S波偏振的初步研究

根据新丰江地震台记录的 2 0 0 1年 2月 6日新丰江小震群数字化资料 ,分析计算了该震群的S波分裂的偏振参数。在与新丰江地区的最大主应力方向和构造、介质特性对比后 ,认为本文所得的S波偏振方向 (NW6 0°)与该区实际的活动断裂分布和主压应力轴方向 (NW6 0°)基本相同。作为该区地壳微裂隙的NW优势取向 ,是应力场作用下裂隙定向排列的结果。因此 ,S波偏振方向可作为研究介质各向异性和区域应力场特性的一种的参数     

Crack-filling clays and weathered cracks in the DPRI 1800 m core near the Nojima Fault, Japan: Evidence for deep surface-water circulation near an active fault

Abstract Crack-filling clays and weathered cracks were observed in the Disaster Prevention Research Institute, Kyoto University (DPRI) 1800 m cores drilled from the Nojima Fault Zone, which was activated during the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake). The crack-filling clays consist mainly of unconsolidated fine-grained materials that fill opening cracks with no shear textures. Most of the cracks observed in the DPRI 1800 m cores are yellow-brown to brown in color due to weathering. Powder X-ray diffraction analyses show that the crack-filling clays are composed mainly of clay minerals and carbonates such as siderite and calcite. Given that the top of the borehole is approximately 45 m above sea level, most of the core is far below the stable groundwater table. Hence, it is suggested that the crack-filling clays and weathered cracks in the cores taken at depths of 1800 m were formed by the flow of surface water down to the deep fractured zone of the Nojima Fault Zone during seismic faulting.     

Scattering of seismic waves by cracks in multi-layered geological regions: II. Numerical results

The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field.