地震各向异性——多组裂隙对横波偏振的影响

通过对多分量地震资料的分析,我们发现随着频率的增加横波分裂时差减小.对于深部接收的VSP数据来说快横波的偏振方向保持不变,而对于浅层接收的VSP数据来说偏振方向却存在一个最大可以达到20°的旋转.尽管多尺度随机分布微裂隙岩石物理模型已经成功地模拟并解释了横波分裂时差随频率变化的现象,却不能解释与频率相关的横波分裂.据推测,如果微裂隙的排列方向和大裂隙的排列方向不同,利用低频信息获得的偏振方向将指示裂隙主方向,而利用高频信息获得的偏振方向则指示微裂隙方向.在背景多孔隙介质中存在多组裂隙的情况下,推导出垂直入射条件下横波偏振方向的解析式,给出了系统研究横波在介质中传播的方法.研究结果表明,横波偏振方向会随着频率的变化而变化,并且在入射方位、角度一定的条件下,是裂隙方位和密度的函数,这些认识可能有助于揭示观测到的、依赖频率变化的横波偏振现象.     

多分量地震资料处理解释技术研究

随着油田勘探开发的不断深入,多波多分量地震资料的应用也越来越广泛.本文结合实际资料,对多波多分量地震资料的处理和解释方法进行了探讨和研究,主要针对多波资料的静校正、叠加成像、转换波资料的共转换点的求取方法等技术进行了分析研究,开发了综合利用多波资料进行地震属性和各向异性研究的方法,形成了一套较完善的多分量地震资料的处理、解释技术系列.经过在胜利油田罗家地区的初步应用,表明了预测结果与钻井资料相吻合.     

方位各向异性粘弹性介质波场数值模拟

当地震信号通过复杂地球介质时,地层除了表现为各向异性,还表现为内在的粘弹性特征.因此,为准确描述地震波在地球介质中的传播特征,理想的地球介质模型应该能够模拟岩石的各向异性特征和衰减特征.本文给出了各向异性粘弹性介质模型的波动方程及其差分格式,并利用有限差分法实现了地震波波场数值模拟.结果表明了该介质模型中地震波场特征与各向异性主轴方位和介质的粘滞性参数之间的关系.     

各向异性介质中扭转波分裂的实验观测

实验室可以产生两种振动模式的横波,一种是剪切振动,另一种是扭转振动,在各向同性介质中两模式的横波速度是相同的,但它们的振动特性不一样,前者表现出很强的偏振特性,后者为无偏振特性.实验测试表明无偏振特性的扭转波在各向异性介质中传播时也会出现两种速度不同的扭转波,速度值与剪切横波的快慢横波速度值一致.用扭转波换能器接收时,这快慢扭转波的波形振幅不受各向异性方位影响.通过两块均匀的各向异性样品,用实验观测揭示了各向异性介质中扭转波的一些传播特征.     

各向异性介质中的弹性阻抗及其反演

地震反演已成为油藏描述中的重要组成部分.绝大多数的常规地震反演是叠后地震数据体上进行,很少考虑各向异性存在的情况.随着勘探开发的发展,地震各向异性和叠前地震波阻抗反演引起了人们极大关注.本文在各向同性介质中弹性阻抗研究基础上,推导出了各向异性介质中的弹性阻抗方程,提出了地震各向异性介质中用弹性阻抗进行储层参数描述的技术路线和框架,并对反演过程中存在的问题进行了有益探讨.     

Preliminary seismic anisotropy in the upper crust of the south segment of Xiaojiang faults and its tectonic implications

The Xiaojiang faults,striking north-to-south(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern part of the Sichuan-Yunnan rhombic block(SYB).It is also a crucial zone for material escaping from the Tibetan Plateau(TP)due to the collision between the Indian Plate and the Eurasian Plate.In December 2017,the Institute of Earthquake Forecasting of the China Earthquake Administration(CEA)deployed a linear temporary seismic broadband array,the Honghe-Xiaojiang temporary Seismic Array(HX Array),across first-order block boundaries in the southern SYB.By using the waveform data of small earthquakes recorded by stations in the HX Array across Xiaojiang faults from 2017 to 2019,and by permanent seismic stations of the China National Earthquake Networks from 2012 to 2019,this paper adopts the systematic analysis method of shear-wave splitting(SWS),SAM method,to obtain preliminary results for seismic anisotropy in the upper crust.The study area can be divided into two subzones according to the spatial distribution of the directions of polarization of the fast shear-wave(PFS)at the stations:the northern zone(zone A,where the HX Array is located)and the southern zone(zone B,to the south of the HX Array).The results show that the directions of the PFS at stations in zone A were highly consistent,dominant in the NE direction,correlated with the in-situ principal compressive stress,and were seemingly unaffected by the Xiaojiang faults.The directions of the PFS as recorded at stations in zone B were more complicated,and were dominant in the NS direction parallel to that of the regional principal compressive stress.This suggests the joint influence of complex tectonics and regional stress in this narrow wedge area.By referring to the azimuthal anisotropy derived from seismic ambient noise in the southeast margin of the TP,the NS direction of the PFS in the middle and lower crust,and its EW direction in the upper mantle,this paper concludes that azimuthal anisotropy in the upper crust differed from that in the lower crust in the south segment of Xiaojiang faults,at least beneath the observation area,and azimuthal anisotropy in the crust was different from that in the upper mantle.The results support the pattern of deformation of ductile flow in the lower crust,and the decoupling between the upper and lower crusts as well as that between the crust and the mantle in the study area.The crustal directions of the PFS appeared to be independent of the Xiaojiang faults,suggesting that the influence of the South China block on the SYB passed through the Xiaojiang faults to the Yimen region.The results of this study indicate that anisotropic studies based on data on the dense temporary seismic array can yield clearer tectonic information,and reveal the complex spatial distribution of stress and deformation in the upper crust of the south segment of Xiaojiang faults.     

藏南拉康温泉地质特征及雄曲河谷两岸地热分布不均成因分析

西藏山南地区洛扎县雄曲河拉康段在600 m距离内出露温泉4处,仅1处位于河谷右岸;平硐勘查显示两岸岩性、产状、构造一致,地热异常却仅在左岸平硐内部显著,右岸平硐地热异常不明显.本次研究以此异常为出发点,通过片麻状花岗岩不同切面导热实验、片麻状花岗岩与板岩相同切面导热实验,温泉水δ2H,δ18O同位素测试分析等方法,探究...     

中国明对虾(Fenneropenaeus chinensis)血细胞中一氧化氮合成酶的鉴定及其在白斑综合症病毒感染过程中的变化

诱导型一氧化氮合成酶(iNOS)在生物机体免疫，特别在无脊椎动物免疫中的作用近来得到了广泛的关注，由其催化产生的一氧化氯(NO)除具有已知的神经传导、松弛平滑肌等功能外，还具有抗菌、抗病毒、抗寄生虫等作用。作者通过硝基四氯唑蓝(NBT)法和血细胞形态观察等方法，对中国明对虾(Fenneropenaeus chinensis)血细胞中存在的诱导型一氧化氮合成酶进行了初步鉴定。在此基础上，通过亚硝酸盐法和L-瓜氨酸法对比，研究了感染白斑综合症病毒(WSSV)后中国明对虾血细胞中一氧化氯合成酶的变化情况。结果显示，中国明对虾在感染WSSV后，iNOS活性在12h内有上升趋势，实验36h后酶活性显著下降，至60h后酶活性降至对照组的一半左右。同时，被脂多糖(LPS)诱导的一氧化氮合成酶活性与对照相比也有显著下降。与此对应的是，核酸探针斑点杂交法检测病毒的结果显示：实验36h后在对虾体内能够检测到白斑综合症病毒。对照组中国明对虾血细胞的iNOS在实验过程中基本保持稳定。这说明WSSV在感染中国明对虾初期可以诱导血细胞产生iNOS，但随着WSSV在中国明对虾体内的大量增殖及其对血细胞的破坏，使得iNOS活性显著降低，对虾也趋于死亡。因此，iNOS能够作为反映对虾在病毒感染过程中健康状况的有效指标。     

Cavity expansion in cross‐anisotropic rock

Schistous rock can be considered—in a first approximation—as cross‐anisotropic linear elastic material. The determination of the corresponding material constants on the basis of the laboratory investigation of rock samples often fails, as the extraction of appropriate cores proves to be unfeasible (the cores disintegrate if the schistosity is pronounced). In this paper a new method is presented to determine the material constants of a linear elastic cross‐anisotropic rock on the basis of cavity expansion field tests, e.g. with a radial jack. To this purpose, an analytic approximation for the deformation of a hydrostatically loaded cylindrical cavity in cross‐anisotropic rock is derived which serves to the inverse analysis of the material parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Description of deformation process in inherently anisotropic granular materials

The main focus in this work is on modeling of mechanical response of granular materials that display inherent anisotropy. Both the experimental and numerical investigations are described. First, the results of direct shear as well as drained/undrained triaxial tests that involve crushed limestone with elongated angular‐shaped particles are reviewed. Afterward, a mathematical framework is presented for modeling of elastic/ inelastic deformation that incorporates the multi‐laminate approach. The deformation is monitored on a set of randomly oriented planes, and the formulation incorporates the thickness of the shear band that is associated with sliding/separation process. A systematic procedure for identification of material functions/ parameters is outlined that is based on the results of direct shear tests, and the framework is later applied to simulate the behavior under triaxial conditions. The results of numerical simulations are compared with the experimental data. Copyright © 2011 John Wiley & Sons, Ltd.