Upper mantle seismic anisotropy beneath a convergent boundary: SKS waveform modeling in central Tibet

This study used SKS waveforms from the International Deep Profiling of Tibet and the Himalayas (INDEPTH) III dataset and a new 2D method for modeling seismic waves in anisotropic media to construct an image of anisotropic structures beneath central Tibet. A preferred model revealed three-segment anisotropic structures in the upper mantle beneath the study region. Waveform modeling demonstrated that the anisotropy was mainly generated by the lithosphere but not the asthenosphere, and that an anisotropic model with a flatter axis of symmetry provides a more consistent interpretation of the observations than models having steeply dipping symmetry axes. A relatively low velocity zone may underlie or intermingle with the anisotropic structures in the northern portion of the region. Synthetic tests also indicate that variations in the elastic constants and depth extent of the anisotropy assumed by the calculations do not affect the general conclusions, although trade-offs exist among certain model parameters. The modeling results suggest that the complex seismic structures in central Tibet were associated with underthrusting of the Indian lithosphere beneath the Asian lithosphere; the inferred flat symmetry axis of the anisotropy was likely generated during this collision process. If this were not the case, the inherited anisotropy would exhibit a steeply dipping axis of symmetry, parallel to the direction of underthrusting.     

Effects of fabric anisotropy on elastic shear modulus of granular soils

The fabric anisotropy of a granular soil deposit can strongly infl uence its engineering properties and behavior. This paper presents the results of a novel experimental study designed to examine the effects of fabric anisotropy on smallstrain stiffness and its evolution with loading on the elastic shear modulus of granular materials under a K0 condition. Two primary categories of fabric anisotropy, i.e., deposition-induced and particle shape-induced, are investigated. Toyoura sand deposits with relative densities of 40% and 80% were prepared using deposition angles oriented at 0o and 90o. Piezoelectric transducers were used to obtain the elastic shear modulus in the vertical and horizontal directions(Gvh and Ghh). The measurements indicate distinct differences in the values of G with respect to the different deposition angles. Particle shapeinduced fabric anisotropy was examined using four selected sands. It was concluded that sphericity is a controlling factor dominating the small-strain stiffness of granular materials. The degree of fabric anisotropy proves to be a good indicatorin the characterization of stress-induced fabric evolution during loading and unloading stress cycles. The experimental data were used to calibrate an existing micromechanical model, which was able to represent the behavior of the granular material and the degree of fabric anisotropy reasonably well.     

Incidence, reflection and transmission angles in anisotropic media

IntroductionGenerallyspeaking,theinclusionofanisotropy(exceptdeclaration,anisotropyreferstohomogenousanisotropy)rendersthemathematicalformulationquitecomplicated.Snell'Slawisnotanexceptionandthecalculationofreflectionandtransmissionanglesisnotatrivialtask.ThegraphicalapproachestocalculatingreflectionandtransmissionanglesforanisotropicmediawerepresentedbyAuld(1973)andRokhlin,etal(1986).DaleyandHorn(1977,1979)andSlawinski(1996)deriveSnell'slawintheparticularcasesoftransverselyisotropicandelli…     

Non-invasive lab test in the monitoring of vadose zone contaminated by light non-aqueous phase liquid

We discuss a strategy capable of a quantitative long-term monitoring of water saturation and volume variation of light non-aqueous phase liquids in the soil. The goal was reached monitoring a controlled sand cell contaminated with classical gasoline over 124 days, using geophysical methods such as electrical resistivity tomography, induced polarization and ground penetrating radar. We show that empirical relations, linking the water saturation to the physical parameters measured as resistivity from electrical resistivity tomography and travel time from georadar with advanced processing, are good tools for this purpose. The consistence of the proposed process is validated by both good overlap of results carried out from electrical resistivity tomography and georadar and theoretical models simulating the actual experiment.     

Seismic amplitude inversion for the transversely isotropic media with vertical axis of symmetry

Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data.     

Seismic identification of channel sandbodies in the Fuyang oil layer in North Songliao Basin, China

The Fuyang oil-layer in North Songliao Basin is characterized by thin interbedded sands and shales, strong lateral variation, strong reservoir heterogeniety, and so on. The thickness of individual sand layers is generally 3 - 5 m. Identifying the channel sand-bodies of the Fuyang oil layer using seismic techniques is very difficult due to the low seismic resolution. Taking the GTZ area as an example, we discuss the genetic characteristics of the channel sand-bodies and point out the real difficulty in using seismic techniques to predict the channel sand-bodies. Two methods for the identification of channels are presented： frequency spectrum imaging and pre-stack azimuthal anisotropy. Identifying the channel sand-bodies in Fuyu oil-layer using the two seismic methods results in a success rate up to 80% compared with well data.     

含泥质低孔渗各向异性黏弹性介质中的波频散和衰减研究

本文定义了各向异性黏弹性参数修正因子,并将其引入到黏弹性模型中以体现泥质含量对黏弹性机制的影响,同时将波传播过程中孔隙介质骨架黏弹性力学机制与两种孔隙流体流动力学机制（Biot流动和喷射流动机制）有机地统一起来处理,从而给出了描述含泥质低孔渗孔隙各向异性介质中波传播规律的黏弹性Biot/squirt (BISQ)模型.数值计算结果表明,入射波的方位角、各向异性渗透率以及泥质含量等对含流体复杂孔隙介质中波频散和衰减的影响具有显著的方位各向异性特征,在低频范围内（地震波勘探频率）黏弹性力学机制对波传播能量的衰减起主导作用.     

火星感应磁场模型及其磁力线分布

本文利用火星具有电离层而无内禀磁场的特点以及它与太阳风相互作用的性质,通过适当的假设,建立了火星感应磁场模型.此模型建立如下,利用电流连续的特性: Δ·j=0 (j为感应电流)以及对火星磁层中的电流体系分布的合理假设给出电流,并由毕奥—萨伐尔定理得到火星周围的磁场强度的表达式;利用我们自编的磁力线跟踪程序由求得的磁场强度得到火星周围的磁力线分布.我们发现:利用此火星磁场模型得到的火星周围的磁力线分布与卫星观测的结果以及其他方法得到的结果符合的很好.     

Origin of layering in cumulate gabbros in the Oman ophiolite: Insights from magnetic susceptibility measurements in the Wadi Sadm area

Abstract   Magnetic susceptibility and the anisotropy of magnetic susceptibility were measured on an 800-cm-thick succession of cumulate gabbro in the Sadm area of the Oman ophiolite. The section contained three distinct cumulate units. The susceptibility tends to decrease upward in each from a melanocratic layer (several tens of centimeters thick) to a leucocratic layer (a few meters thick). The susceptibility decreases in accordance with the decreasing number of magnetite grains, which are the alteration product mainly of olivine minerals. This suggests the cyclic downward accumulation of olivine in the cumulate gabbro. The apparent strain deduced from the patterns of magnetic and grain fabrics was the result mostly of simple shear, so that the layering of gabbro is understood to be formed primarily by a crystal cumulus process followed by simple shear deformation.     

地震各向异性——多组裂隙对横波偏振的影响

通过对多分量地震资料的分析,我们发现随着频率的增加横波分裂时差减小.对于深部接收的VSP数据来说快横波的偏振方向保持不变,而对于浅层接收的VSP数据来说偏振方向却存在一个最大可以达到20°的旋转.尽管多尺度随机分布微裂隙岩石物理模型已经成功地模拟并解释了横波分裂时差随频率变化的现象,却不能解释与频率相关的横波分裂.据推测,如果微裂隙的排列方向和大裂隙的排列方向不同,利用低频信息获得的偏振方向将指示裂隙主方向,而利用高频信息获得的偏振方向则指示微裂隙方向.在背景多孔隙介质中存在多组裂隙的情况下,推导出垂直入射条件下横波偏振方向的解析式,给出了系统研究横波在介质中传播的方法.研究结果表明,横波偏振方向会随着频率的变化而变化,并且在入射方位、角度一定的条件下,是裂隙方位和密度的函数,这些认识可能有助于揭示观测到的、依赖频率变化的横波偏振现象.