模拟堆载作用的黄土边坡土体变形机理试验

通过固结不排水剪试验,研究了堆载作用下不同深度、含水量和围压的原状黄土的变形和破坏特征,并从黄土的微观结构角度分析了产生这一现象的原因,结合黄土边坡特殊的工程地质条件,分析了堆载作用下黄土边坡土体的变形破坏过程。试验结果表明,不同深度、含水量和围压的原状黄土的应力应变曲线和抗剪强度具有不同的特征;特殊的工程地质条件,使黄土坡体的某些部位形成了堆载作用下不利于黄土材料强度保持的含水量和围压的组合,导致了这些部位黄土的变形破坏,进而诱发坡体的变形破坏。     

Effects of boundary conditions and partial drainage on cyclic simple shear test results—a numerical study

Owing to imperfect boundary conditions in laboratory soil tests and the possibility of water diffusion inside the soil specimen in undrained tests, the assumption of uniform stress/strain over the sample is not valid. This study presents a qualitative assessment of the effects of non‐uniformities in stresses and strains, as well as effects of water diffusion within the soil sample on the global results of undrained cyclic simple shear tests. The possible implications of those phenomena on the results of liquefaction strength assessment are also discussed. A state‐of‐the‐art finite element code for transient analysis of multi‐phase systems is used to compare results of the so‐called ‘element tests’ (numerical constitutive experiments assuming uniform stress/strain/pore pressure distribution throughout the sample) with results of actual simulations of undrained cyclic simple shear tests using a finite element mesh and realistic boundary conditions. The finite element simulations are performed under various conditions, covering the entire range of practical situations: (1) perfectly drained soil specimen with constant volume, (2) perfectly undrained specimen, and (3) undrained test with possibility of water diffusion within the sample. The results presented here are restricted to strain‐driven tests performed for a loose uniform fine sand with relative density D_r=40%. Effects of system compliance in undrained laboratory simple shear tests are not investigated here. Copyright © 2004 John Wiley & Sons, Ltd.     

Assessing surface water quality of the Yangtze Estuary with genotoxicity data

The present study investigated the genotoxicity of the surface water samples from the Yangtze Estuary with the Ames test in three seasons. Several important chemical parameters, such as COD inorganic nitrogen, active phosphate and heavy metals, were also analyzed at the same time. According the results, surface water samples from the south branch and a few of samples at the seaward end of the Yangtze Estuary show positive genotoxicity in some seasons. Chemical analysis revealed that the Yangtze Estuary was seriously polluted by inorganic nitrogen and by active phosphate. However, chemical parameters could not demonstrate the spatial variation of water quality of the estuary, and they could not assess adverse effects of chemicals in mixtures as well. Therefore, it is recommended that genotoxicity data, mutation rate of the Salmonella typhimurium strain TA98 at the dose of 1 l per plate, be taken as a new parameter assessing surface water quality of the Yangtze Estuary. Our studies also suggested that genetic toxicology assays, such as the Ames test, could be applied as a routine measure to monitoring marine environment in China. The paper proposes a development of the National Seawater Quality Standard of China.     

Experimental and numerical investigations of stresses in a fully grouted rock bolts

Rock bolts are widely used for rock reinforcement in hard-rock mining and civil engineering since a long time. However the use of fully grouted rock bolts and cable bolts is limited in coal mines. In order to improve performance of the rock bolts as a supplementary roof support system for any type of roof condition in coal measured formations, it is necessary to have a good understanding of the behavior of the bolt–grout and grout–rock interactions as well as the mechanism of load transfer in rock bolts.As the performance of grouted bolts depends on bond strength, extensive laboratory pullout as well as pushout tests were conducted in the present investigations with the variations in the bolt diameters, length and cement–water mixing ratios of grout. The load–displacement curves were developed and were verified with the numerical results obtained from finite element analysis using ALGOR software.Numerical models were validated for pushout tests and a detailed analysis was carried out to know the displacement, stress, strain distribution along the bolt.     

A study on the bio-hydro mechanical effects of the tree roots on the Agaclı coal reclaimed – forested land

The research area that is in the north of Istanbul (Turkey) and it is a land of open pit coal mining residuals reclaimed and turned to forest in 1988–1989. The materials that are open pit mine spoils are formed by sandy loam, sandy clay loam, heavy loam and clay (noncalcareous Pliocene I sediments). Pseudoacacia (Robinia pseudoacacia), Maritima Pine (Pinus pinaster) and Stone Pine (Pinus pinea) are planted on these materials. The aims of this research were to determine the strength of the material provided by tree roots and evaluate the performance of the forestation practices at lands especially where open pit coal mining spoil (residual) materials piled up. The research has been performed at two stages. The first one was hydro-mechanical effect concerned about material moisture depletion as a result of transpiration and the second one was bio-mechanical effects due to strength parameters of the roots and their growth pattern within the material. All results were evaluated in relation to tensile strength and displacement curves due to pre and post failure behaviors of materials and root systems. The results showed the increase of the displacement of the material was the significant indicator of the bio-mechanics tensile strength of the material provided by the tree roots. The fast growing type of tree roots have stabilized the material up to a depth for 80–100 cm by covering the coal residual materials within 12 years.     

SDINS/GPS in-flight alignment using GPS carrier phase rate

The alignments of the strapdown inertial navigation system (SDINS) utilizing GPS carrier phase rate measurements is introduced. In this paper, a measurement model of GPS carrier phase rate under two antenna configurations is derived in order to be used for the SDINS alignment process. For in-flight alignment, the performance of the proposed SDINS/GPS integration method is analyzed using the covariance analysis and the overall performance is briefly confirmed by the navigation result of a van test. Furthermore, we find that during in-flight alignment the proposed SDINS/GPS integrated system using GPS carrier phase rate measurements can be implemented in real time because the integer ambiguity problem resulting from carrier phase measurements is avoided.     

Vulnerability assessment in karstic areas: validation by field experiments

Several methods have been developed for vulnerability mapping in karstic areas. These methods need additional validation by field experiments. Several tests have been carried out in the Swiss Jura with natural and artificial tracers. The protective role of some intrinsic properties of the system, such as glacial deposits covering karst, epikarst storage and system dilution effect, have been clearly demonstrated. Use of three tracers in parallel showed the reactivity of the epikarst: all tracers arrived at the same time, but their relative concentration stayed clearly different. A classification of contamination scenarios into four classes is proposed. It is shown that the relevance of some intrinsic properties depends on the considered scenario class. The hydrodynamic state of the aquifer influences greatly flow velocities and can strongly modify contaminant concentrations at the output of the system. The spatial repartition (point vs diffuse) and the quantity of contaminant entering the system will also influence the output response. Hence, results from tracing experiments cannot be used straightforward for obtaining a representative value of flow velocity, dispersion or recovery rate.     

粉煤灰湿陷变形的三轴试验和计算

采用双压力室三轴仪对粉煤灰试样进行了单线法湿陷试验,研究了在静水压力作用以及在不同应力状态和应力水平下粉煤灰湿陷变形的规律,得出了粉煤灰湿陷变形的经验计算公式.提出了计算粉煤灰地基湿陷变形的"全应变曲线"增量有限元法.基于本文的试验结果,对一个粉煤灰地基的湿陷变形进行了有限元计算.     

Recent landslide activity in Manaihan,East Belgium

Past landslides have been recognized in the Battice area in E-Belgium. In contrast to the other inactive landslides, the Manaihan landslide responded immediately to heavy rainfall events in the last two decades. This study aims to map its spatial extent and the dominant surface features; to measure surface displacement using GPS; to investigate subsurface structure with Cone penetration test (CPT) and corings; and to determine the depth of the shear surface by inclinometers. Results show a partial landslide reactivation. Surface velocities range between 20 and 40 cm/year and are strongly dependent on winter rainfall. CPT results give clear boundaries between the landslide mass and the undisturbed bedrock in the head scarp. Distinct shear surfaces have been determined with displacement rates up to 15.8 mm in 21 days. Further research should apply geophysical methods for two-dimensional information on the ground, investigate geotechnical properties of the landslide mass, model slope instability, and determine the influence of a sewage pipe crossing the central landslide mass as a potential cause for landslide activity.     

Undrained dynamic-loading ring-shear apparatus and its application to landslide dynamics

Landslides are gravitational mass movements of rock, debris or earth. Some move very slowly, thus conforming to the field of statics, but some move rapidly. Study of the initiation and motion of rapid landslides needs to develop Landslide Dynamics involving dynamic loading and dynamic generation/dissipation of excess pore-water pressure. New developments in science can be facilitated by new technological advances. This study aimed to develop a new apparatus that can geotechnically simulate the formation of the shear zone and the following long and rapid shear displacement that occurs in high-velocity landslides. Professor K. Sassa and his colleagues at DPRI (Disaster Prevention Research Institute), Kyoto University, have worked to develop an undrained dynamic-loading ring-shear apparatus for this purpose. A series of different types of apparatus (DPRI-3, 4, 5, 6, 7) have been developed from 1992 to the present. This paper describes the development of this apparatus and its application to the study of earthquake-induced landslides and the latest landslide-triggered debris flow in Japan. Also, tests of the latest version (DPRI-7) with a transparent shear box for direct observation of the shear zone during a rapid shearing are described.