Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

旧路改建高速公路中地基强夯效应测试与工艺参数分析

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。     

嵌入式态势显示系统的设计与开发

嵌入式态势显示系统在机动武器平台上具有重要的应用价值。本文在分析态势显示系统常用的三种开发模式优缺点基础上,改进并设计了一种适合VxWorks特点的开发模式,论述了系统的逻辑结构和功能部件,并以态势符号库管理、态势档案管理等功能模块为重点,介绍了系统的详细设计思想和实现方法。     

浅层SH反射波法和多道瞬态面波法 进行联合工程勘察的讨论

针对目前单一工程物探方法调查浅部地质结构的局限性,提出采用弹性波法勘察中研究浅部地质结构的SH波反射勘察和多道瞬态面波法勘察这2种有效手段进行联合勘探,提高其可靠性和精度,并给出了3个实例,指出了在数据采集和处理时应注意的问题。     

土钉抗拔承载力的原位试验研究

根据土钉现场抗拔试验数据,分析了钉材、浆液龄期等因素对土钉抗拔承载力的影响,建议了合理的下层土钉开挖时间。最后通过试验土钉抗拔力反算土体与锚固体的极限粘结强度,并与规范推荐值进行了比较。     

斜坡应力分布的系统测试与反演分析

采用简易、快速、经济的洞壁应力恢复法对某工程边坡勘探平硐洞壁应力场作了系统测试, 并采用FLAC2D软件对测试成果作了斜坡初始应力的反演分析。结果表明, 斜坡应力场随深度变化具有明显分带性, 应力量值随硐深曲线具有典型的驼峰式特征, 与理论分析结果相符, 表明该方法能较好地应用于斜坡应力场的系统测试和研究。成果对认识斜坡岩体的变形破裂及卸荷特征等具有重要意义。     

下一代互联网协议（IPv6）的概念及原理

IPv6是下一代互联网采用的核心协议。本文介绍了IPv6技术发展背景、新特性、地址空间、地址格式、地址表示方法、地址类型、地址范围、IPv4到IPv6的过渡技术,以及在国土资源部的具体应用。     

UKF算法及其在GPS卫星轨道短期预报中的应用

分析了GPS卫星预报星历,在比较分析EKF和UKF优缺点的基础上,将UKF引入GPS卫星轨道预报研究中.数值模拟和结果分析表明,UKF方法预报更稳定,能有效地提高轨道预报精度和稳定性.     

Time-dependent stress change during failure of rocks

The energy balance of a solid subject to fracture has been explored using heat and mass transfer equations with regard to the volumetric and superficial components. In the suggested model, brittle fracture of a cracked solid considered as a heterogeneous two-phase medium is described by an equation analogous to the Griffith’s criterion for propagation of a single crack. The derived equation is used, together with estimates of relative change in specific interface area, to study the respective change of free strain energy and pressure in rocks associated with failure.     

西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。