A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

2002年CT扫描和三维成像学术年会评述

由CT理论与应用研究编辑部和北京信息工程学院主办、有中国体视学学会多位理事和会员参加的“2002年CT扫描和三维成像研讨会（CT科技学术年会）”于2002年10月18－20日，在北京大学逸夫苑理科楼学术报告厅举行。中国体视学学会副理事长刘国权教授出席致辞，对于这次CT科技年会的召开表示祝贺，并介绍了2003年在美国圣迭戈和北京将要召开第11届国际体视学会大会的有关情况，希望有关专家准备论文出席，来自全国各地48位专家，教授出席了会议，本次会议涉及CT理论、计算方法和软件及硬件技术；医学CT扫描成像和疾病诊断；工业CT和三维成像：地球层析和工程CT。美国爱荷华大学王革教授，纽约罗彻斯特大学宁若拉教授专程到会，分别做了精彩的特邀主题报告：显微CT的锥束重建新方法和近年来在这方面的进展和展望”，“锥光束三维CT技术在美国的过去、现在和未来”“国内专家也报告了前沿研究的新成果，在会前，CT理论与应用研究编辑部，根据收到的论文和摘要汇编和印制了专集，在会议最后一天，召开了“CT理论与应用研究”期刊编委会，传达了中国科协对于办好科技期刊的新要求，会议开得很成功。     

汾河口傍河水源地激发补给量研究

该文阐述傍河水源地地下水资源构成和补给特性。利用野外试验与室内数值模拟相结合方法，分析汾河口傍河水源地可采水资源量，数值模型刻画黄河实际摆动边界，考虑潜水延迟给水和极端干旱气候条件等多种方案；利用环境同位素技术追踪傍河水源地开采条件下的河水激发补给过程和补给强度。研究表明，在渗透性较好的常年性河流旁建立的水源地，具有抵御极端气象、水文环境以丰补歉的能力，枯水年动用的含水层储存量。丰水年恢复性强。     

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal     

地震前兆观测仪器标定问题的探讨

标定工作，在地震前兆观测仪器的研究，使用及所得数据的处理中均已成为一个不可少的环节，但缺少有关标定问题的基石性研究和讨论。本文就标定的定义、种类、目的、要求、存在的问题等做一粗线的讨论，以期今后加强这一工作的深入研究。     

碎石桩加固冷却塔地基效果的检测技术与质量评价

介绍了安阳电厂冷却塔碎石桩复合地基静载、动力触探、瑞利波法系列原位试验。根据试验结果，对冷却塔地基加固与改良效果及施工质量进行了评价。     

Windows95下帮助系统的开发策略和技巧

Ｈｅｌｐ是能够为用户提供快捷访问的联机帮助信息。现在，研制联机Ｈｅｌｐ帮助系统已成为软件开发过程中必不可少的项目之一。正如其它的任何工程项目一样，Ｈｅｌｐ的制作也需要精心地策划和编排，需要充分发挥Ｈｅｌｐ开发软件的功能，以制作出满足用户要求的高水平的联机帮助系统。笔者就这些方面的内容，论述了开发Ｗｉｎｄｏｗｓ９５下的联机帮助系统的基本原则及使用Ｈｅｌｐ开发工具的一些技巧。     

高岭土深加工产品开发

当前世界上煅烧高岭土产品已瞄准高档化、专用化、精细化和功能化，深加工系列产品已应用于高档汽车、船舶、乳胶、颜料、化工、造纸、涂料等方面。内蒙古自治区有丰富的高岭土资源，我们应依托优势资源，尽快掌握高新技术，开发高岭土系列产品，争取在较短的时间内在国内外激烈的市场竞争中立于不败之地，为自治区的经济繁荣起到积极的推动作用。