隐伏煤田的TM信息提取及地质效果

在遥感图像上,被巨厚第四系冲积层覆盖的煤田区隐伏地质构造和火成岩分布信息是一种非直接的、微弱的隐伏信息,本文以淮北煤田为实例,探讨了从TM图像上提取这种信息的可行性与方法,并分析了其地质效果。     

用几何光学模型对方向变化和直方图建模(英文)

森林和林地的图象二向性反射函数是一个统计函数，较之小尺度的树冠，它更多地用于大尺度的均匀覆盖的地块。用航空象片和高空间分辨率扫描仪数据作的图象热点影响研究在小尺度下显示出很大方差，而且，太阳和观测角度的交互变化进一步增加了这种反射各向异性变化的方差并有规律地继续呈现在分辨率低的图象中，这被称作ＢＲＶＦ或二向性反射方差函数。近年来，作为一种解释结构的手段，高分辨率图象的方向性方差和直方图结构越来越受到重视，这方面的数据也越来越多。这项工作是利用图象方差来解释结构问题（Ｓｔｒａｈｌｅｒ和李小文倡导）的一种延伸，并在过去１５年中由众多人员作了大量工作。在树冠尺度下，森林的直方图和二向反射方差函数可以计算出来，这里利用了近似迭代函数来处理这些数据并和数值积分模拟进行了对比，结果显示可对二向性反射方差函数的测量和引入直方图的各向异性进行准确建模。     

机载模拟POLDER多角度图象配准(英文)

多角度成象对于获取多角度遥感数据是非常重要的。在对多角度数据进行分析之前，首先要对多角度图象进行配准。经过配准，可以识别出相同的地面目标。在配准过程中，一个主要的困难是由于观察角度的不同、双向反射变化及大气的影响造成的图象灰度变化。如何解决灰度变化的影响关系到图象的配准精度。我们在该文中介绍一种多角度图象配准过程，包括预处理、基于层次结构的图象灰度相关配准。为了去掉大角度造成的灰度变化，我们用改进的模板匹配进行配准。这种方法的优点是与配准模板灰度均值无关，只与灰度变化程度有关。配准过程中也同时考虑到纹理的变化。整个配准过程是沿着观测角度增大的方向进行的序列图象配准，以提高大角度图象配准精度。最后，图象的纠正采用局部自适应几何纠正以获得较满意的结果。我们用法国ＣＮＥＳ提供的ＰＯＬＤＥＲ飞机模拟多角度图象进行配准，并提取了小麦和水稻等植被的多角度信息。     

利用TM数据快速提取含矿蚀变带方法研究

热液蚀变岩类是在含矿热液作用下引起原岩化学成分和物理性质发生变化的结果，因此蚀变岩类往往与内生产矿产伴生，有时其本身就是含矿体。不同蚀变矿特级组合具有独特的光谱响应，但是光谱的反射和吸收产特征较弱称为遥感找矿弱信息标志。     

CT技术用于激光等离子体成象研究

本文研究适用于ＩＣＦ实验的ＣＴ技术，并已用于“星光Ⅱ”装置的激光等离子体的实验Ｘ光测量，重建出Ｘ光的三维分布，获得了有意义的结果，表明该技术在ＩＣＦ实验中的应用的可能性。     

综合信息解译图件智能化处理模型

解译过程的智能化实现，一直是综合信息矿产预测理论与实践中所关注的问题。本文根据综合信息解译的特点，分析了实现智能化过程的基本方法，设计了开发智能解译系统的模型。本模型集图像分析与处理技术和专家系统技术为一体，体现了解译过程的本质特征。文中论述了它们的基本任务和要求。本模型对建造不同研究内容、不同解译任务的智能化系统具有指导作用     

黄土微结构图像处理的方法

本介绍了对黄土微结构电镜图像进行图像处理的常用方法。这些方法可以去除图像噪声，提高图像的对比度，使得图像便于进行人工解译或借助软件的图像分析。     

利用SPOT和ETM+影像进行县级土地利用调查--以河北省万全县为例

本文以SPOT和ETM 影像作为主要信息源，经过对图像进行几何纠正、配准、增强和融合等一系列处理后，在ARCVIEW GIS基础上，成功完成了对河北省万全县土地资源利用情况的调查分析。同时还对应用遥感技术成功获取土地资源利用信息的方法和技术进行了探讨。     

Sequence of faulting and deformation during the 2000 eruptions of the Usu Volcano, Hokkaido, Japan—interpretation and image analyses of aerial photographs

Significant faulting and deformation of the ground surface has been rarely known during volcanic eruptions. Usu Volcano, Hokkaido, Japan, is a unique example of deformation due to felsic magma intrusion. Usu Volcano has a history of such types of eruptions as phreatic, pumice eruption (Plinian type), pyroclastic flowing and lava doming since 1663. On March 31, 2000, phreatomagmatic to phreatic eruptions took place after 23 years of dormancy in the western piedmont, followed by explosions on the western flank of Usu Volcano. They were associated with significant deformation including faulting and uplift. The eruptions and deformation were continuing up to the end of May 2000.We identified the faulting using total nine sets of aerial photographs taken from before the eruption (March 31, 2000) to more than 1 year (April 27, 2001) after the end of the activity, and traced deformation processes through image processing using aerial photographs. We found that some of the new faults and the associated phreatic eruptions were related to old faults formed during the 1977–1981 eruptive episode.The image processing has revealed that the surface deformation is coincident with the area of faulting forming small grabens and the phreatic explosion vents. However, the faulting and main explosive eruptions did not take place in the highest uplift area, but along the margin. This suggests that the faulting and explosive activities were affected by small feeder channels diverging from the main magma body which caused the highest uplift.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.