Holocene evolution of mud depocentres on a high-energy, low-accumulation shelf (NW Iberia)

The high-energy, low-accumulation NW Iberian shelf features three confined Holocene mud depocentres. Here, we show that the evolution of such depocentres follows successive steps. The flooding of inner shelf zones and river catchment areas by the late deglacial sea-level rise provided the precondition for shelf mud deposition. Following this, the Holocene deceleration of the sea-level rise caused a rapid refill of the accommodation space within river valleys. Subsequently, the export of major amounts of fines was initiated. The initial onset and loci of shelf mud deposition were related to deposition-favouring conditions in mid-shelf position or to the presence of morphological highs, which act as sediment traps by providing protection against stronger hydrodynamic energy. The detailed reconstruction of the Holocene depocentre evolution shows for the first time that the expansion of such shelf mud deposits cannot only occur by linear growth off the associated sediment source. Rather, they might develop around centres that are fully disconnected from the source of original sediment supply, and expand later into specific directions. Based on these differences and on the connection of the individual mud depocentres to the material source we propose a conceptual subdivision of the group “mid-shelf mud depocentres”.     

Thermal impact of the break-up of Pangea on the Iberian Peninsula, assessed by thermochronological dating and numerical modelling

Thermochronological studies of Variscan basement in Iberia yield cooling ages typically younger than ~ 200 Ma. In this paper, we explore the regional implications of this recurrent age maximum by examination of low and high temperature thermochronological datasets from all over Iberia. Based on these results, we show that in general the lack of cooling ages older than 200 Ma is the result of several important regional periods of thermal resetting. Resetting took place in areas of extension and burial during the Mesozoic break-up of Pangea. Evidence for large scale magmatism and mineralisation is found in Iberia during the Mesozoic, since at that time Iberia formed part of the Central Atlantic Magmatic Province and a large mineralization province extending from North Africa to Western Europe. Numerical modelling allows us to assess the conditions under which rocks in the upper crust may have been thermally reset and the mechanisms likely involved. Results show that active rifting combined with shallow magmatism, and to a lesser extent deep sedimentary burial, could have led to an increase of the geothermal gradient up to ~ 73 °C/km and the reset of thermochronometers with closure temperatures up to 200 °C. Yet, we suggest that also hydrothermal activity, associated to extensional basins, played an important role to the increase of temperatures of some basement rocks above 300 °C.     

Late Quaternary deposition and facies model for karstic Lake Estanya (North-eastern Spain)

Lake Estanya is a small (19 ha), freshwater to brackish, monomictic lake formed by the coalescence of two karstic sinkholes with maximum water depths of 12 and 20 m, located in the Pre‐Pyrenean Ranges (North‐eastern Spain). The lake is hydrologically closed and the water balance is controlled mostly by groundwater input and evaporation. Three main modern depositional sub‐environments can be recognized as: (i) a carbonate‐producing ‘littoral platform’; (ii) a steep ‘talus’ dominated by reworking of littoral sediments and mass‐wasting processes; and (iii) an ‘offshore, distal area’, seasonally affected by anoxia with fine‐grained, clastic sediment deposition. A seismic survey identified up to 15 m thick sedimentary infill comprising: (i) a ‘basal unit’, seismically transparent and restricted to the depocentres of both sub‐basins; (ii) an ‘intermediate unit’ characterized by continuous high‐amplitude reflections; and (iii) an ‘upper unit’ with strong parallel reflectors. Several mass‐wasting deposits occur in both sub‐basins. Five sediment cores were analysed using sedimentological, microscopic, geochemical and physical techniques. The chronological model for the sediment sequence is based on 17 accelerator mass spectrometry ¹⁴C dates. Five depositional environments were characterized by their respective sedimentary facies associations. The depositional history of Lake Estanya during the last ca 21 kyr comprises five stages: (i) a brackish, shallow, calcite‐producing lake during full glacial times (21 to 17·3 kyr bp ); (ii) a saline, permanent, relatively deep lake during the late glacial (17·3 to 11·6 kyr bp ); (iii) an ephemeral, saline lake and saline mudflat complex during the transition to the Holocene (11·6 to 9·4 kyr bp ); (iv) a saline lake with gypsum‐rich, laminated facies and abundant microbial mats punctuated by periods of more frequent flooding episodes and clastic‐dominated deposition during the Holocene (9·4 to 0·8 kyr bp ); and (v) a deep, freshwater to brackish lake with high clastic input during the last 800 years. Climate‐driven hydrological fluctuations are the main internal control in the evolution of the lake during the last 21 kyr, affecting water salinity, lake‐level changes and water stratification. However, external factors, such as karstic processes, clastic input and the occurrence of mass‐flows, are also significant. The facies model defined for Lake Estanya is an essential tool for deciphering the main factors influencing lake deposition and to evaluate the most suitable proxies for lake level, climate and environmental reconstructions, and it is applicable to modern karstic lakes and to ancient lacustrine formations.     

Late Precambrian series and structures in the Navalpino Variscan Anticline (Central Iberian Peninsula)

The Navalpino Anticline is a major Variscan structure in the Central Iberian Zone of Spain. Three lithological groups are defined in the pre-Ordovician rocks of this anticline. The Rifean or Lower Vendian Extremeño Dome Group is unconformably overlain by the Upper Vendian Ibor-Navalpino Group. This latter group presents two different facies separated by a NW-SE trending synsedimentary fault. The Lower Cambrian Valdelacasa Group unconformably overlies both the Extremeno Dome and the Ibor-Navalpino Groups.Three pre-Variscan episodes of deformation have been defined in the area of the Navalpino Anticline. A major asymmetrical fold with a subvertical east-west-striking limb is the result of the first deformation event of pre-Late Vendian age. The second deformation event is of Cadomian (Late Precambrian) age and is composed of two stages; (i) an early extensional stage including NW - SE trending extensional fault and basin development in the north-eastern block; and (ii) a second compressive stage giving rise to north-south trending upright folds. This second compressive stage possibly inverted the basin. A final pre-Variscan deformation event took place between the Early Cambrian and the Early Ordovician resulting in a 5–10° tilting to the north-east.There are two main phases of Variscan deformation in the area. The first deformation event (D_v1) gave rise to a upright WNW - ESE trending folds on all scales, whereas the second (D_v2) gave rise to a brittle—ductile sinistral strike-slip shear zone tending subparallel to the axial trace of the D_v1 folds.     

Effective elastic thicknesses of the lithosphere in the Central Iberian Peninsula from heat flow: Implications for the rheology of the continental lithospheric mantle

The traditional view of the rheology of the continental lithosphere, sometimes known as the “jelly sandwich model”, consists of a strong upper crust, a weak lower crust, and a strong upper lithospheric mantle. Some authors argue, however, that the lithospheric mantle is weak and contributes little to the total strength and the effective elastic thickness of the lithosphere; this weakness is claimed to be due to the mantle being wet or subjected to temperatures higher than usually believed. This paper uses the relationship between rheology of the lithosphere and heat flow to calculate theoretical effective elastic thicknesses for three regions of the central Iberian Peninsula (the Duero Basin, the Spanish Central System and the Tajo Basin), taking into account the contribution of the crust and the lithospheric mantle, for dry and wet rheologies. We found that a wet peridotite rheology for the lithospheric mantle is generally consistent with independent (based on Bouguer coherence or flexural modeling) estimates of the effective elastic thickness for the study area, whereas a dry peridotite rheology cannot be reconciled with them. Moreover, the contribution of the mantle to the bending moment of the lithosphere, and therefore to both the effective elastic thickness and the total strength of the lithosphere, is important, and it may even be the dominant contribution. Therefore, the jelly sandwich model may be considered valid for the central Iberian Peninsula.     

伊比利亚型——一种新类型块状硫化物矿床地质地球化学及成因

块状硫化物矿床主要有两种类型：火山岩容矿型（如日本黑矿）和沉积岩容矿型（如加拿大苏利文矿床）。近年来,在西班牙和葡萄牙的伊比利亚区发现了一条长２５０ｋｍ,宽２５～７０ｋｍ的黄铁矿带,其中产有若干世界级的超大型锡多金属块状硫化物矿床。根据对这些矿床的地质特征、成矿流体包裹体、Ｈ、Ｏ、Ｓ、Ｐｂ同位素及成矿环境和成矿模式的研究表明,它们具有明显不同于火山岩深矿型沉积岩容矿型块状硫化物矿床的特征,而一种新     

Avalonia,get bent!–Paleomagnetism from SW Iberia confirms the Greater Cantabrian Orocline

The amalgamation of Pangea formed the contorted Variscan-Alleghanian orogen,suturing Gondwana and Laurussia during the Carboniferous.From all swirls of this orogen,a double curve in Iberia stands out,the coupled Cantabrian Orocline and Central Iberian curve.The Cantabrian Orocline formed at ca.315–290 Ma subsequent to the Variscan orogeny.The formation mechanism of the Cantabrian Orocline is disputed,the most commonly proposed mechanisms include either(1)that south-westernmost Iberia would be an Avalonian(Laurussian)indenter or(2)that the stress field changed,buckling the orogen.In contrast,the geometry and kinematics of the Central Iberian curve are largely unknown.Whereas some authors defend both curvatures are genetically linked,others support they are distinct and formed at different times.Such uncertainty adds an extra layer of complexity to our understanding of the final stages of Pangea’s amalgamation.To solve these issues,we study the late Carboniferous–early Permian vertical-axis rotations of SW Iberia with paleomagnetism.Our results show up to 70
counterclockwise vertical-axis rotations during late Carboniferous times,concurring with the anticipated kinematics if SW Iberia was part of the southern limb of the Cantabrian Orocline.Our results do not allow the necessary penecontemporaneous clockwise rotations in Central Iberia to support a concomitant formation of both Cantabrian and Central Iberian curvature.The coherent rotation of both Gondwanan and Avalonian pieces of SW Iberia discards the Laurussian indenter hypothesis as a formation mechanism of the Cantabrian Orocline and confirms the Greater Cantabrian Orocline hypothesis.The Greater Cantabrian Orocline likely formed as a consequence of a change in the stress field during the late Carboniferous and extended beyond the Rheic Ocean suture affecting the margins of both Laurussia and Gondwana.     

Fry and Rf/ϕ strain methods constraints and fold transection mechanisms in the NW Iberian Variscides

Apúlia is a small Portuguese sector in NW of Central-Iberian Zone, that have been deformed in a non-coaxial sinistral transpressive regime during the first and main Variscan tectonic event (D₁). This deformation give rise to a major NW–SE anticline, where the S₁ N–S cleavage transect the inverted short NE limb; two and three-dimensional strains analysis have been done in the low metamorphic grade Ordovician quartzites of this limb using Fry and Rf/ϕ methods. The data show that most deformation was due to intergranular deformation mechanisms. The intragranular deformation leading to the distortion of strain markers and to cleavage was very incipient and a latter event in the D₁ phase. The apparent plane strain ellipsoids (if no volume change is assumed) related to the intragranular mechanisms contrast with the more prolate strain ellipsoids related to the bulk deformation of Apúlia Quartzites. This constrictional bulk strain fabrics are characteristic of the sinistral transpressive regimes dominant in the northern sectors of the Central-Iberian Zone.     

Cenozoic tectonic activity in a Variscan basement: Evidence from geomorphological markers and structural mapping (NW Iberian Massif)

The NW Iberian Massif is part of an ancient basement that has been considered a seismically stable area with no outstanding Cenozoic tectonics. However, recent seismic activity revealed the need for better knowledge of the Cenozoic structures in the area. Because of the lack of Mesozoic deposits and the scarcity of Cenozoic sediments, as well as the intense deformation of the Pre-Mesozoic Variscan basement, it is difficult to study the Cenozoic tectonic structures. In this work, the combination of detailed structural mapping and study of geomorphological markers in the Variscan basement has allowed recognition of Cenozoic tectonic structures, kinematics and processes that otherwise would not have been identified. The identified structures have been gathered into three groups: a) NE–SW-trending strike-slip faults, mainly sinistral, b) NNW-vergent thrusts that uplift the Caurel Mountains and Galaico-Leoneses Mountains, and c) E–W and ENE–WSW thrusts that uplift the Ancares Mountains in a pop-up structure. The structures cut the Pre-Cenozoic erosion surface and affect the drainage network that shows patterns characteristic of tectonic activity. The three groups of structures define sectors with different relief showing a strong link between geomorphological elements and tectonic structures. The intense drainage reorganisations observed in the area and the deformation of Miocene–Pliocene deposits, point out to a significant Late Miocene tectonic activity in the region. Thus, the Cenozoic tectonic activity in the northwest of the Iberian Peninsula takes place during an extensive period of time which started with the episodes of compression in the Cantabrian Margin and it is identified nowadays by the recent seismic activity recorded in the north-western Iberian Peninsula (1995 and 1997 Lugo events). The seismicity is related to the Cenozoic structures identified in the area, which move under the present SE–NW horizontal maximum compression and coincide with the proposed seismogenic faults.