Three orders of regional sea-level changes control facies and stacking patterns of shallow platform carbonates in the Maestrat Basin (Tithonian-Berriasian,NE Spain)

Middle Tithonian-Berriasian shallow platform carbonates of the Maestrat Basin (Salzedella and Montanejos sections, NE Spain) are stacked in sequence stratigraphic units of different orders. Higher-order sequences (parasequences and subunits) have a shallowing or deepening-shallowing evolution. They have been related to the short-term eccentricity and precession cycles. Major facies changes and stacking pattern of parasequences reveal the presence of two 2nd-order sequences. The Lower Sequence is middle Tithonian-mid early Berriasian in age. The Upper Sequence extends up to the mid-late Berriasian. It is suggested that local subsidence changes along with regional sea-level changes controlled the long-term evolution of accommodation in the Maestrat Basin. Facies evolution, stacking pattern and sharp lithological changes have allowed the definition of five 3rd-order sequences in the Lower Sequence in Montanejos. The transgressive deposits are characterised by the progressive absence of the restricted lagoon facies, and the presence of deepening-upward intervals in the parasequences. The highstand deposits display an increase in siliciclastics and a progressive predominance of restricted lagoon facies. Some of the 3rd-order sequence boundaries match the sequence boundaries identified in other European basins and may be related to sea-level falls (induced by the long-term eccentricity cycle) enhanced during periods of long-term loss of accommodation.     

An environmental snapshot of the Bølling interstadial in Southern Iberia

The Bølling–Allerød interstadial is the closest warm time period to the Holocene. The study of the climate variability during this most recent warm scenario provides a natural record of potential environmental changes related with global temperature variations. Little is known about this interstadial in the Southern Iberian Peninsula. Therefore, the exceptional climatic record of the Otiñar paleo-lake (ca. 14.5–14.0 cal ka BP), provides environmental information about the first part of this interstadial (Bølling) in this key region. Although the studied high-resolution isotopic record point to almost invariant hydrological conditions in the paleo-lake, with little change in the carbon budget and important limestone dissolution, the pollen record shows an increase in forest species that can be interpreted as a warming trend and an increase in humidity during the Bølling in the area. This record is one of the few continental archives that show this climatic trend in Southern Iberia, agreeing with many other regional records from the western Mediterranean. This does not agree with higher latitude records that show an opposite trend. This opposite pattern in precipitation between the western Mediterranean and more northern latitudes could be explained by a persistent and increasing negative NAO mode during the Bølling in this area.     

Geoarchaeology of Pleistocene open-air sites in the Vila Nova da Barquinha-Santa Cita area (Lower Tejo River basin, central Portugal)

This paper aims to provide insight into human occupation and landscape change during the Pleistocene in a central area of the Lower Tejo basin (Portugal). Detailed geomorphological mapping, coupled with lithostratigraphy, sedimentology and luminescence dating, supports the identification of a complete terrace staircase sequence. It consists of six gravely terraces located below the culminant (Pliocene) basin unit. A chronological framework for the sedimentary sequences and associated human industries is proposed and correlated with marine oxygen isotope stages (MIS): T1 terrace, not dated; T2, not dated; T3, >300 ka; T4, ∼300-160 ka (MIS8, MIS7 and MIS6); T5, ∼136-75 ka (MIS5); T6, ∼62-30 ka (MIS3); colluvium and aeolian sands, ∼30-14 ka (MIS2); valley fill deposits, ∼14 ka to present (MIS1). The oldest artefacts were found at the base of the T4 terrace, with the local stratigraphic level dated to ≥175 ± 6 ka (Middle Pleistocene). The lithic assemblages collected from distinct stratigraphic levels (T4, T5 top, T6 terraces and colluvium) are characterized by the predominance of opportunistic technological choices, a feature that can be attributed partly to the preferential exploitation of the available raw material, dominated by local-sourced quartzites and quartz pebbles. The adaptation to local raw material (texture and volume), together with subsistence patterns and behaviours, could explain the rarity of Acheulian types (handaxes and cleavers) and picks in the T4 terraces of the Tejo tributaries; this is in contrast to the same terrace of the Tejo valley, in which these types are found. Interpretation of the environmental conditions (controlled by climate and glacio-eustatic sea-level changes) affecting the hunter-gatherer human groups is also presented.     

Refined models of gravitational potential energy compared with stress and strain rate patterns in Iberia

This study examines the role of gravitational potential energy (GPE) in generating second-order (spatial scale ∼10² km) variations in the Iberia stress and strain-rate patterns. We present a new map of present-day strain rate field derived from the secular velocity field computed using all available continuously operating Global Navigation Satellite Systems (GNSS) stations in Iberia. The estimated strain rate field is generally consistent with the tectonic framework of the Iberian region, even though sporadic sharp local variations downgrade its correlation with the regional stress patterns. Many of the sharp spatial variations in the strain rate map are consistent with local changes of deformation style determined by prevailing faults. To obtain a more accurate estimate of GPE we use new data on the structure of the crust and apply a thin sheet approach using a 3-D definition of deviatoric stress. The GPE is derived from two isostatically compensated models (GPEd and GPEe compensated by density and elevation adjustment, respectively) and from the truncated geoid (GPEg). The GPE stresses are then summed with the first-order stress field due to the Eurasia–Nubia (EU–NU) convergence and the results compared with both the stress and strain rate data. In agreement with previous studies, we find that the GPE does not significantly change the NW–SE average direction of the most compressive stress (SHmax) imposed by the EU–NU collision, its main effect being to cause spatially changing stress regimes. From the analysis of the different GPE models we find: (1) in the Pyrenees, the tectonic forces have a secondary role when compared to the GPE. In this region, the model that best correlates with observations is the one emphasizing the role of surface elevation as a source of GPE (GPEe); (2) in the Iberian Chain and the Betics, the GPE imposes NE–SW extension consistent with a strike-slip regime and is equally (GPEe) or more (GPEg) important than the tectonic forces. In these regions, both deep heterogeneities associated with mantle convection and elevation are important sources of GPE; (3) in western Iberia, the GPE differences work against dominant tectonic forces by reducing the SHmax magnitude. The GPEg model is the one that best predicts the average strike-slip regime in Galicia; and finally (4) in the Gulf of Cadiz the gravitational potential stresses have a minor role and the style of deformation is clearly controlled by the tectonic forces.     

Evidence for coupled reverse and normal active faulting in W Iberia: The Vidigueira–Moura and Alqueva faults (SE Portugal)

The Vidigueira–Moura fault (VMF) is a 65 km long, E–W trending, N dipping reverse left-lateral late Variscan structure located in SE Portugal (W Iberia), which has been reactivated during the Cenozoic with reverse right-lateral slip. It is intersected by, and interferes with the NE–SW trending Alentejo–Plasencia fault. East of this intersection, for a length of 40 km the VMF borders an intracratonic tectonic basin on its northern side, thrusting Paleozoic schists, meta-volcanics and granites, on the north, over Cenozoic continental sediments preserved in the basin, on the south. West of the faults intersection, evidence of Cenozoic reactivation is scarce. In the eastern sector, Plio-Quaternary VMF reactivation is indicated by geomorphologic, stratigraphic, and structural data, showing reverse movement with a right-lateral strike-slip component, in response to a NW–SE trending compressive stress. An average vertical displacement rate of 0.06 to 0.08 mm/yr since late Pliocene (roughly the last 2.5 Ma) is estimated. The Alqueva fault (AF) is a subparallel, northward dipping, 7.5 km long anastomosing fault zone that affects Palaeozoic basement rocks, and is located 2.5 km north and on the hanging block of the VMF. The AF is also a reverse left-lateral late Variscan structure, which has been reactivated during the Tertiary with reverse right-lateral slip; however, Plio-Quaternary reactivation was normal left-lateral, as shown by abundant kinematical criteria (slickensides) and geomorphic evidence. It shows an average displacement rate of 0.02 mm/yr for the vertical component of movement in the approximately last 2.5 Ma. It is proposed that the normal displacements on the AF result from tangential longitudinal strain on the upthrown block of the VMF above a convex ramp of this main reverse structure. According to this model of faults interaction, the AF is interpreted to work as a bending-moment fault sited above the VMF thrust ramp. Consequently, it is expected that the displacements on the AF increase towards the topographic surface with the increase in the imposed extension, declining downwards until they vanish above or at the VMF ramp. In order to constrain the proposed scheme, numerical modeling was performed, aiming at the reproduction of the present topography across the faults using different geodynamic models and fault geometries and displacements.     

Deep structure, recent deformation and analog modeling of the Gulf of Cadiz accretionary wedge: Implications for the 1755 Lisbon earthquake

The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E-W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10-15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200-250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E-W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.     

Geodynamic setting and geochemical signatures of Cambrian–Ordovician rift-related igneous rocks (Ossa-Morena Zone, SW Iberia)

An important rifting event, accompanied by massive igneous activity, is recorded in the Ossa-Morena Zone of the SW Iberian Massif (European Variscan Orogen). It likely culminated in the formation of a new oceanic basin (Rheic ocean?), remnants of which appear presently accreted at the southern margin of the Ossa-Morena Zone. Rifting propagated diachronously across the zone from the Early Cambrian to the Late Ordovician, but by Early Ordovician time, the existence of a significant tract of new ocean is evidenced by a breakup unconformity. Although early stages of rifting were not accompanied by mantle-derived igneous activity, a pronounced increase of the geothermal gradient is indicated by partial melting of metasedimentary protoliths in the upper and middle crust, and by coeval core-complex formation. Geochemistry of the main volume of igneous rocks, emplaced some million years later during more mature stages of rifting, suggests an origin in a variably enriched asthenospheric source, similar to that of many OIB, from which subsequent petrogenetic processes produced a wide range of compositions, from basalt to rhyolite. A tectonic model involving collision with, and subsequent overriding of, a MOR is proposed to account for the overall evolution, a present-day analogue for which lies in the overriding of the East Pacific Rise by North America and the rifting of Baja California.     

Fry and Rf/ϕ strain methods constraints and fold transection mechanisms in the NW Iberian Variscides

Apúlia is a small Portuguese sector in NW of Central-Iberian Zone, that have been deformed in a non-coaxial sinistral transpressive regime during the first and main Variscan tectonic event (D₁). This deformation give rise to a major NW–SE anticline, where the S₁ N–S cleavage transect the inverted short NE limb; two and three-dimensional strains analysis have been done in the low metamorphic grade Ordovician quartzites of this limb using Fry and Rf/ϕ methods. The data show that most deformation was due to intergranular deformation mechanisms. The intragranular deformation leading to the distortion of strain markers and to cleavage was very incipient and a latter event in the D₁ phase. The apparent plane strain ellipsoids (if no volume change is assumed) related to the intragranular mechanisms contrast with the more prolate strain ellipsoids related to the bulk deformation of Apúlia Quartzites. This constrictional bulk strain fabrics are characteristic of the sinistral transpressive regimes dominant in the northern sectors of the Central-Iberian Zone.