Hydrothermal Metalliferous Sediments and Waters Off the Lesser Antilles

Considerable metal enrichments have been found in hydrothermal fluids and metalliferous sediments off the central Lesser Antilles Volcanic Arc. The elements variably enriched in the fluids as a result of the hydrothermal activity are Fe, Mn, As, Si, B, Li and in the sediments, Fe, P, Mo, As, Sb, Hg, Cu and Pb. Variations in the concentrations of these elements in both fluids and sediments along the arc result from a number of factors, the most important of which is the stage that each island's volcano has reached in its eruptive cycle. Although hydrothermal mineralization on the sea floor off the islands is only low grade, phase separation in the hydrothermal fluids at depth could be leading to higher grade stockwork mineralization below the vent fields or the discharge of metal rich brines on the lower flanks of the volcanic islands.     

冲绳海槽热流机制浅析

冲绳海槽是一个高热流区，平均热流值极高，但不均匀，实测最小值与最大值相差三个数量级以上，结合海槽地区的构造和地球物理特征，探讨了导致这一高而分散热流特征的多种因素。包括异常壳幔结构。海底热液循环以及地下水对流等，并分析了相应的控制机制。     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

云南永胜宝坪浅源热液改造型铜矿地质及成因

宝坪铜矿赋存于三叠系下统腊美组中。矿体呈似层状,少量脉状,严格受北北西-北西向构造控制。矿床成因类型属浅源热液改造型铜矿床。     

Low temperature volatile production at the Lost City Hydrothermal Field, evidence from a hydrogen stable isotope geothermometer

Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH₄ and δD-H₂ values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.     

Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.     

Conceptual hydrodynamic model of the Pamukkale hydrothermal field, southwestern Turkey, based on hydrochemical and isotopic data

The results of study on the hydrochemical and isotope characteristics of shallow and deep waters at Pamukkale hydrothermal field Turkey are described in order to obtain a better understanding of the hydrological circulation. The field can be grouped into two groundwater sub-systems; cold water springs of Ca–HCO₃ type (10–12 °C), and CO₂-rich thermal waters of Ca–HCO₃–SO₄ type (25–58 °C). The occurrence of these water types is closely related to the morphology of the region, where intense tectonism formed horst and graben structures. Hence, two hydrogeological systems were defined: a deep geothermal system which is related to extensive and deep circulation of meteoric water in the regional flow system, and a shallow system which is related to local groundwater flow through sedimentary strata. The meteoric water falling at higher elevations percolates to the local groundwater system at a shallow level and flows to the deep geothermal system. During a deep convection cycle from a recharge to discharge area, the cold water attains heat from the asthenospheric intrusions, causing it to ascend. Variations of chemical and isotopic composition of thermal waters result from their mixing with cool groundwater in a shallow aquifer during their ascent to the surface.

---

Résumé Les résultats d'une étude portant sur les caractéristiques hydrochimiques et isotopiques de puits phréatiques et profonds situés dans le champ hydrothermal de Pamukkale, sont décrits de telle manière à éclairer le fonctionnement des circulations hydrologiques. Le champ peut étre divisé en deux sous-systèmes d'eaux souterraines, l'un avec des eaux de sources froides (10–12 °C) de type Ca–HCO3, et les eaux thermales (25–58 °C) riches en CO₂ et de type Ca–HCO₃–SO4. L'occurrence de ces types d'eaux est fermement liée à la morphologie de la région, oùne tectonique intense a engendré des structures en horsts et en grabens. Dés lors deux systèmes hydrogéologiques ont été définis : un système profond, qui est lié à la circulation extensive et profonde des eaux météoritiques dans le système régional d'écoulement, et un système phréatique lié aux écoulements locaux des eaux souterraines à travers les strates sédimentaires. Les eaux météoritiques aux altitudes élevées, percolent jusqu'aux systèmes locaux phréatiques, puis coulent jusqu'aux systèmes géothermaux plus profonds. Durant le cycle de convection profond des zones de recharge jusqu'aux zones de décharge, l'eau froide atteint les zones chaudes liées aux intrusions athenosphériques, provoquant la remontée. Les variations de la composition chimique et isotopique des eaux thermales résultent dans leurs mélanges avec des eaux souterraines froides dans les aquifères phréatiques durant leur remontée jusqu'à la surface.

---

Resumen Se describen los resultados del estudio de las características isotópicas e hidroquímicas de las aguas someras y profundas para obtener un mejor entendimiento de la circulación hidrológica del campo hidrotermal Pamukkale. El campo puede agruparse en dos sub-sistemas de agua subterránea: manantiales de agua fría del tipo Ca–HCO₃ (10–12°C) y aguas termales ricas en CO₂ del tipo Ca–HCO₃–SO₄(25–58°C). El ambiente de estos tipos de aguas se relaciona estrechamente con la morfología de la región donde el tectonismo intenso ha formado estructuras extensionales tipo graben y horst. Se definieron dos sistemas hidrogeológicos: un sistema geotermal profundo que se relaciona con la circulación profunda y extensa de agua meteórica en el sistema regional de flujo y un sistema somero el cual se relaciona con flujo local de agua subterránea a través de estratos sedimentarios. El agua meteórica que cae en altas elevaciones percola al sistema local de agua subterránea en un nivel somero y fluye hacia el sistema geotermal profundo. Durante un ciclo de convección del área de recarga hacia la zona de descarga, el agua fría se calienta a partir de los intrusivos astenosféricos lo que ocasiona que asciendan. Como resultado de la mezcla de las aguas recalentadas, con agua subterránea fría en un acuífero somero durante el ascenso hacia la superficie, se derivan variaciones en la composición química e isotópica de las aguas termales.

     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.     

早涝碱咸综合治理与生态环境良性循环

华北平原东部淡水资源短缺，旱涝碱成灾害限制了农业生产的可持续发展。海河的治理，解决了排洪排涝排咸出路。春季开发利用地下水包括微咸水和半咸水抗旱灌溉。夏季利用伏雨洗盐排咸，增大降雨入渗，减少径流流失，防治渍涝灾害，把降雨转化为地下水资源。秋冬引蓄河水，回灌地下水补源。以土壤与潜水的地层空间作为调节大气降水、土壤水、地下水、地表水的地下水库，以调控地下水埋深在临界动态为指标，最大限度地把时空分布不均的天然降雨转化为可持续利用的水资源。地表水地下水联合运用，促使水资源采补平衡，降雨灌溉淋洗脱盐强于干旱蒸发积盐过程，地下水淡化强于矿化过程。实现旱涝碱咸综合治理，水土资源可持续利用，经济社会可持续发展，生态环境良性循环。