The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.     

Geological control factors of micro oil distribution in tight reservoirs

Understanding the oil distribution characteristics in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil distribution characteristics are mostly concerned with the basin scale. Based on Lucaogou core samples, geochemical approaches including Soxhlet extraction, total organic carbon (TOC), and Rock-Eval are combined with reservoir physical approaches including mercury injection capillary pressure (MICP) and porosity-permeability analysis, to quantitatively evaluate oil distribution of tight reservoirs on micro scale. The emphasis is to identify the key geological control factors of micro oil distribution in such tight reservoirs. Dolomicrites and non-detrital mudstones have excellent hydrocarbon generation capacity while detritus-containing dolomites, siltstones, and silty mudstones have higher porosity and oil content, and coarser pore throat radius. Oil content is mainly controlled by porosity, pore throat radius, and hydrocarbon generation capacity. Porosity is positively correlated with oil content in almost all samples including various lithologies, indicating that it is a primary constraint for providing storage space. Pore throat radius is also an important factor, as oil migration is inhibited by the capillary pressure which must be overcome. If the reservoir rock with suitable porosity has no hydrocarbon generation capacity, pore throat radius will be decisive. As tight reservoirs are generally characterized by widely distributed nanoscale pore throats and high capillary pressure, hydrocarbon generation capacity plays an important role in reservoir rocks with suitable porosity and fine pore throats. Because such reservoir rocks cannot be charged completely. The positive correlation between hydrocarbon generation capacity and oil content in three types of high porosity lithologies (detritus-containing dolomites, siltstones, and silty mudstones) supports this assertion.     

东非鲁伍马盆地深水区构造-沉积演化过程及油气地质特征

利用深水区的二维、三维地震资料开展构造-沉积演化研究,鲁伍马盆地二叠纪—早侏罗世为冈瓦纳陆内—陆间裂谷活动期,发育河流—湖泊沉积;中侏罗世—早白垩世为马达加斯加漂移期,位于剪切型大陆边缘,发育海陆过渡相沉积;晚白垩世—渐新世为被动大陆边缘期,深水沉积广泛发育,重力流沉积延伸至戴维隆起带;中新世—第四纪为东非裂谷海域分支活动期,陆坡和凯瑞巴斯地堑发育深水重力流沉积。盆地垂向上形成"断—坳—断"结构,二叠纪—早侏罗世及中新世—现今发育两期明显的裂谷活动。马达加斯加漂移期的海相泥岩为深水区的主力烃源岩,古近纪的陆坡深水浊积砂体为主要储层。东非裂谷海域分支的断层活动沟通了下伏烃源岩,晚期断层不发育的西部陆坡成为主要的油气聚集区。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.     

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。     

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.     

海底地形数据处理与DEM生成

分析了海底DEM生成经常会遇见的问题,介绍了坐标变换、接边处理、插值加密等数据预处理方法,最终生成海底规则格网DEM。     

Simulating runoff generation and its spatial correlation with environmental factors in Sancha River Basin: The southern source of the Wujiang River

Journal of Geographical Sciences - Runoff generation is an important part of water retention service, and also plays an important role on soil and water retention. Under the background of the...