基于干扰试井技术的煤层气储层参数测定

为弥补传统注入压降试井测试结果以点代面的问题,提出基于煤层气干扰试井的储层参数测试方法,阐述了其基本原理、测试方法和数据分析依据。以沁水盆地南部1口激动井和4口检测井组成的井组为例,结合该井组前期注入压降法、历史拟合法测试结果,并与干扰试井测试结果进行对比分析。结果表明,煤层气干扰试井法各井测点渗透率接近利用排采数据的历史拟合值,且高于注入压降测值,但3种方法获得数据处于同一数量级之内;煤层气干扰试井技术方法可以反映试验5口井的区域渗透率分布特征,其区域东南方向渗透率较大,即为主裂隙发育方向。结合3种方法测得的参数值对比可知,煤层气干扰试井法既可获得离散点的参数值,又可以获得区域井组的连通性和优势渗流方向,结果有助于认识区域储层参数,为进一步的井网和排采井的布置提供比较直接的数据依据。     

An analysis of coal bump liability in a bump prone mine

Summary This paper presents an analysis of causes of bump in a deep coal mine. The analysis consists of in-mine measurement determination, analysis of physical and mechanical properties of mine materials and simulation of mine layout and mining sequence. Major factors contributing to the causes of bump have been reviewed and those that are related to this case have been identified and simulated analytically using a three-dimensional finite element method.     

A constitutive-relationship model for film flow on rough fracture surfaces

Film flow on fracture surfaces may be an important mechanism for fast flow in unsaturated fractured rocks. Incorporating this mechanism into a numerical model requires knowledge of constitutive relationships for film flow. Based on fractal concepts and a conceptual argument of Tokunaga et al. that water films could be treated as analogues to water in unsaturated porous media, a simple constitutive-relationship model has been developed. The validity of the model is supported by excellent agreements between calculation results and experimental observations for two different fracture surfaces.

---

Resumen El flujo pelicular en la superficie de las fracturas puede ser un mecanismo importante para el flujo rápido en rocas fracturadas no saturadas. Incorporarlo en un modelo numérico requiere conocer las relaciones constitutivas del flujo pelicular. Se ha desarrollado un modelo de una relación constitutiva sencilla partiendo de conceptos fractales y de un argumento conceptual de Tokunaga et al., según el cual las películas de agua pueden ser tratadas como análogos del agua en medios porosos no saturados. La validez del modelo es corroborada por los excelentes ajustes entre los resultados numéricos y las observaciones experimentales en dos superficies de fracturas diferentes.

---

Résumé Lécoulement en film sur les surfaces de fracture peut être un mécanisme important pour lécoulement rapide dans les roches fracturées non saturées. Lincorporation de ce mécanisme dans un modèle numérique nécessite la connaissance des relations fondamentales pour lécoulement en film. Basé sur des concepts fractals et sur un argument conceptuel de Tokunaga et al. selon lequel des films deau peuvent être considérés comme des analogues de leau en milieu poreux non saturé, un modèle simple des relations fondamentales a été développé. La validité de ce modèle est confirmée grâce à une excellente concordance entre les résultats du calcul et les observations expérimentales pour deux surfaces différentes de fractures.

     

摩擦桩沉降变形规律及承载力确定的探讨

在现场的桩基垂直静载荷试验基础上 ,进行荷载传递机理分析和沉降变形的阶段性划分 ,探讨了确定单桩竖向承载力的新方法 ,为工程合理、充分地利用承载力提供参考。     

Facies and depositional architecture according to a jet efflux model of a late Paleozoic tidewater grounding-line system from the Itararé Group (Paraná Basin), southern Brazil

During the Late Paleozoic, the Gondwana supercontinent was affected by multiple glacial and deglacial episodes known as “The Late Paleozoic Ice Age” (LPIA). In Brazil, the evidence of this episode is recorded mainly by widespread glacial deposits preserved in the Paraná Basin that contain the most extensive record of glaciation (Itararé Group) in Gondwana. The Pennsylvanian to early Permian glaciogenic deposits of the Itararé Group (Paraná Basin) are widely known and cover an extensive area in southern Brazil. In the Doutor Pedrinho area (Santa Catarina state, southern Brazil), three glacial cycles of glacier advance and retreat were described. The focus of this article is to detail the base of the second glacial episodes or Sequence II. The entire sequence records a deglacial system tract that is represented by a proximal glacial grounding-line system covered by marine mudstones and shales associated with a rapid flooding of the proglacial area. This study deals with the ice proximal grounding-line systems herein interpreted according to lab model named plane-wall jet with jump. Detailed facies analysis allowed the identification of several facies ranging from boulder-rich conglomerates to fine-grained sandstones. No fine-grained deposits such as siltstone or shale were recorded. According to this model, the deposits are a product of a supercritical plane-wall outflow jet that changes to a subcritical jet downflow from a hydraulic jump. The hydraulic jump forms an important energy boundary that is indicated by an abrupt change in grain size and cut-and-fill structures that occur at the middle-fan. The sedimentary facies and facies associations show a downflow trend that can be subdivided into three distinct stages of flow development: (1) a zone of flow establishment (ZFE), (2) a zone of transition (ZFT), and (3) an established zone (ZEF). The proximal discharge is characterized by hyperconcentrated-to-concentrated flow due to the high energy and sediment-laden nature of the flows. At the transitional zone, a hydraulic jump produces a rapid shift of conglomeratic to sandy facies with associated scour features. Towards the distal zones, the jet detaches to originate a vertical turbulent jet characterized by more diluted flows. Discussion of fan facies and architecture within a framework of jet-efflux dynamics provides an improved understanding of grounding-line fans systems that produce coarse-grained strata commonly enclosed by fine-grained rocks. The results have clear implication in terms of prediction of facies tract and geometry of oil and gas reservoirs deposited under similar conditions. And also can be useful to identifying the position of a glacial terminus through time.     

Effects of Volcanic Ash on Computers and Electronic Equipment

Computers and electronic equipment are an important component of the infrastructure of our modern environment. It is therefore essential that we know the effects of volcanic ash on such equipment. This paper presents the results of a pilot study to test computers and cooling fans in an ash-charged environment to assess their vulnerability. In the experiment, ash was poured on to computers and cooling fans in a sealed 0.216 m³ perspex box, with the effects on both the ash and the equipment monitored. Three different types of ash (1996 Ruapehu andesitic ash, Sakurajima andesitic ash and Kaharoa rhyolitic ash) were used in the experiments.In the first experiment each type of ash was photographed by Scanning Electron Microscope (SEM), then passed through the bearing unit of a cooling fan and photographed again afterwards. The bearings within the cooling fan continued to work even after 720 h of testing and there was no significant abrasion of the fan-shaft bearing. The ash was however fragmented, suggesting that the brittle ash shattered to fine dust, which caused significantly less abrasion to the bearings or shaft than expected. Three computers were then tested in the sealed box. Ash was introduced at increasing rates to simulate catastrophic entry of ash into a work environment, and computers were tested throughout using the BURNIN^® testing programme. Failure times ranged from 100 to 150 h; most failures occurring when humidity was increased by spraying water mist into the airflow. If dried out the computers continued to operate again if failure was not catastrophic. Card slot edge connectors proved to be one of the weakest links, as a bridge of ash formed across the gap. They were also subject to abrasion with some of the gold plating being removed. This did not however cause operating difficulties.The conclusions are that computers are more resilient than originally thought, unless the ash is moist. Simple low-tech procedures should be adequate to protect computers from small amounts of dry and moist ash contamination.     

The Reliability of Assigned Values from the GeoPT Proficiency Testing Programme from an Evaluation of Data for Six Test Materials that have been Characterised as Certified Reference Materials

Assigned values derived from the GeoPT proficiency testing programme were compared with certified values for six certified reference materials that have been used as test materials in the GeoPT programme. Statistical analysis showed that there were few significant differences between these sets of data and that these differences had no significant impact on the GeoPT assessment when fitness‐for‐purpose criteria were taken into account.     

凤滩电厂近坝库区边坡岩体力学性质试验研究

通过室内岩石力学性质、节理岩样剪切强度试验及现场岩体结构面推剪试验研究,对凤滩电厂近坝库区4个边坡岩体的强度和变形特性进行了分析,取得了边坡岩体力学性质基本参数。为边坡稳定性分析及工程设计提供了可靠依据。     

Statistical Distributions of Hydraulic Conductivity from Reliability Analysis Data

This paper describes a first-order reliability-based analysis to identify the best-fit probability distributions for hydraulic conductivity. The analysis involved the use of existing hydraulic conductivity model developed from laboratory data and applied to lateritic soils, considering variations in soil parameters. Plots of reliability indices versus coefficients of variation were first made for hydraulic conductivity as well as for initial degree of saturation, plasticity index and clay content, considering three compactive efforts and log-normally distributed hydraulic conductivity. The traditional two-parameter log-normal distribution was compared to four alternative distributions: normal, gamma, Gumbel (extreme value type I-EVT-I) and Weibull (extreme value type III-EVT-III). The analysis showed that the Weibull and normal are the best-fit probability distributions for the hydraulic conductivity based reliability data. Hydraulic conductivities predicted from reliability analysis were used to demonstrate the possibility of applying the results obtained in this research by practising engineers. Experimentally-determined hydraulic conductivities were shown to be in good agreement with predicted values.     

废旧放射源的检测方法及其应用

根据地勘行业所用放射源的特点，确定了废旧放射源的种类、活度、表面剂量率和表面污染率等参数的检测方法，并将方法应用于对上百个未知放射源进行检测和档案整理，效果较好。