刃具斜切入破岩的试验与研究

介绍了刃具斜切入破岩的试验装置及试验结果，推导出了跃进载荷的计算公式，并对试验结果进行了理论分析，探讨了影响刃具侵入岩石难易的因素和影响破岩比功大小的因素。     

新型岩石力学测试系统及应用领域

介绍了Ｔｅｒｅａ Ｔｅｋ系统的组成和其主要功能，并针对石油工程和钻探领域应用岩石力学参数领域作了阐述。     

碎石桩加固冷却塔地基效果的检测技术与质量评价

介绍了安阳电厂冷却塔碎石桩复合地基静载、动力触探、瑞利波法系列原位试验。根据试验结果，对冷却塔地基加固与改良效果及施工质量进行了评价。     

Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

A variance-ratio test for supporting a variable mean in kriging

This article discusses the issue of whether to use a variable mean and describes a test that can be used to evaluate whether it is justified to add terms to the drift (deterministic part) of a geostatistical model. The basic model could be the intrinsic one, where the deterministic part is a constant, and the alternate model could be any model that includes a constant term in the expression for the drift. Also, differences between constant- and variable-mean models are discussed.     

Testing an earthquake prediction algorithm

A test to evaluate earthquake prediction algorithms is being applied to a Russian algorithm known asM8 TheM8 algorithm makes intermediate term predictions for earthquakes to occur in a large circle, based on integral counts of transient seismicity in the circle. In a retroactive prediction for the period January 1, 1985 to July 1, 1991 the algorithm as configured for the forward test would have predicted eight of ten strong earthquakes in the test area. A null hypothesis, based on random assignment of predictions, predicts eight earthquakes in 2.87% of the trials. The forward test began July 1, 1991 and will run through December 31, 1997. As of July 1, 1995, the algorithm had forward predicted five out of nine earthquakes in the test area, which success ratio would have been achieved in 53% of random trials with the null hypothesis.     

红层软岩隧洞围岩变形破坏机制研究

红层软岩的物质组成、化学成分、物理力学性质等方面在国内外已有较系统的研究,但对软岩隧道围岩的变形破坏机理及其治理一直是工程技术人员关心问题。通过对回龙宫隧洞的地质环境分析及有限元数值计算,阐明了红层隧洞围岩的膨胀变形破坏机理,最后提出了在此类围岩中修建水工隧洞的过程中,防止围岩变形破坏的建议。     

岩石水压致裂和诱发地震的实验研究

用7种岩石各制备了几类不同预裂纹的系列试件，并在不同围压下进行水压致裂强度实验。结合典型的水库诱发地震的实际资料和现今构造应力场的实验结果，以及应用岩石强度理论和岩石断裂力学的一些原理、方法，进行岩石孔隙水压诱发地震的探讨。初步结果为：(1)若岩体内构造应力很小，一定大小的孔隙水压力σp，可直接使岩体内的薄弱面致裂并发生小地震。(2)若构造应力较大，存在两类诱发地震的可能：①对岩体浅部一些走向与构造应力的主压应力σ1方向相近的薄弱面，σp可促使其发生张性破裂并诱发小地震。②当构造应力接近于断裂的抗剪强度时，因σp，降低了断裂面上的正应力σn，使原处于稳定状态的断裂失稳，发生滑移破裂并诱发出地震。σp导致断裂的破裂深度增大，使诱发地震的震级大于原潜在的地震震级。(3)各种岩体均存在着一个极限深度，此深度后不再有诱发地震。     

Stability and accuracy analysis of the central difference method for real‐time substructure testing

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.