EFFECTIVE DISCHARGE CALCULATION GUIDE

1 mTRonvcnox: moareS Aun CoxcmSAJluvial rivers have the pOtenhal to adjust their shaPe and dimensions to all flows that tranSPOrtsediment, but Inglis (l94l) suggested that, for rivers that are in regime, a single steady flow could beidenhfied which would Produce the same bankfll dimensions as the natural sequence of events. Hereferrd to this now as the dondnan discharge.Wolman and Mller (l960) idenhfied that the flow doing most bed material transPort over a period ofyears may be taken tO…     

A model of the early evolution of karst aquifers in limestone in the dimensions of length and depth

A new model of the early evolution of limestone karst aquifers in the dimensions of length and depth is presented. In its initial state the aquifer consists of a rock massive with evenly spaced fractures of about 50 μm aperture widths with an hydraulic conductivity of 10⁻⁷ ms⁻¹. In addition to this a coarser network of prominent fractures with aperture widths of several 100 μm is also present. Boundary conditions of constant recharge 450 mm/year, or constant head from the input of allogenic streams are imposed. First the position of the water table in the aquifer is calculated, then dissolutional widening during a time step in all the fractures below the water table is found by use of the well-known nonlinear dissolution kinetics of limestone. This is iterated and the position of the water table as well as the fracture widths are found as a function of time. In the case of constant recharge to a karst plateau, the water table in any case drops to base level and conduits there propagate from the spring headwards. If constant head conditions are valid the position of the water table remains almost stable and conduits propagate along the water table from the input towards the spring. There is competition between conduit evolution along prominent fractures and along tight fissures close to the water table. In any case under constant head conditions one of these pathways wins, and early karst evolution is terminated by a breakthrough event with an explosive increase of the flow through the aquifer until constant head conditions break down. Depending on the boundary conditions of constant head or constant recharge or a combination of both it is possible to describe models of cave genesis, which have been derived from field evidence, such as the water table models of Swinnerton and Rhoades as well as the four-state model by Ford and Ewers (Can. J. Earth Sci., 15 (1978) 1783).     

An experimental investigation of water level effects on the dynamic behaviour of a large arch dam

The need for full‐scale dynamic tests, which are recognized as the most reliable method to evaluate a structure's vibration properties, is increasing as new analysis techniques are developed that take into account the complex interaction phenomenons that occur in dam–reservoir–foundation systems. They are extremely useful to obtain reliable data for the calibration of newly developed numerical methods. The Earthquake Engineering and Structural Dynamics Research Center (CRGP) at the University of Sherbrooke has been developing and applying dynamic testing methods for large structures in the past 10 years. This paper presents the experimental evaluation of the effects of the varying water level on the dynamic response of the 180 m Emosson arch dam in Switzerland. Repeated forced‐vibration tests were carried out on the dam during four different periods of the reservoir's filling cycle during a one‐year span. Acceleration and hydrodynamic pressure frequency responses were obtained at several locations while the dam was subjected to horizontal harmonic loading. The variation of the resonant frequencies as a function of the reservoir level is investigated. A summary of the ongoing numerical correlation phase with a three‐dimensional finite element model for the dam–reservoir–foundation system is also presented. Copyright © 2001 John Wiley & Sons, Ltd.     

Correlation of hydraulic conductivity with stratigraphy in a fractured-dolomite aquifer, northeastern Wisconsin, USA

This study integrated surface and subsurface stratigraphic data with geophysical logs and hydrogeologic data in order to characterize the hydraulic properties of the Silurian dolomite in northeastern Wisconsin. Silurian stratigraphy consists of predictable alternations of characteristic facies associations. A vertical profile of hydraulic conductivity, obtained from short-interval packer tests in a core hole that penetrates a majority of the Silurian section, indicates that hydraulic conductivity ranges over five orders of magnitude (10^–1 to 10^–6 cm/s). Matrix conductivity is generally low and varies with texture; the finer-grained restricted-marine and transitional facies being less permeable than the coarser-grained open-marine facies. High-conductivity values are generally associated with bedding-plane fractures, and fracture frequency is greater in the restricted-marine facies. High-flow features in 16 wells were identified using fluid-temperature/resistivity and heat-pulse flowmeter logs. Natural-gamma logs were used to identify the stratigraphic position of flow features in each well and to correlate flow features to specific stratigraphic horizons. By combining stratigraphic, geophysical, and hydrogeologic data, 14 high-permeability zones within the Silurian aquifer have been identified and correlated in wells more than 16 km apart. These zones parallel bedding, appear most pronounced at contacts between contrasting lithologies, and are most abundant in restricted-marine lithologies. Electronic Publication     

水文水井抽水试验参数自动监测系统的研制与应用

将现代计算机检测技术与水文水井抽水试验相结合，开发研制了多参数自动监测系统，可对抽水试验中孔内水位、水温和出水量进行实时同步检测，该系统在实际工程中得到了应用与验证。介绍了该系统的组成、检测原理、主要性能参数及生产试验情况。     

Seeing Conditions at Sutherland. Results of the 1992/93 seeing campaign

In order to decide whether the seeing conditions at SAAO/Sutherland justify the erection of a 3.5 m telescope and also to compare Sutherland with the Gamsberg/Namibia site, a seeing campaign covering 15 months has been carried out. For direct comparison with the results of the seeing campaign at Gamsberg twenty years before the same QUESTAR telescope was employed. The seeing is determined by the scattering of the star-trail exposed on a film in the focal plane of the telescope. The campaign commenced in February 1992. Up to May 1993, data for 204 nights, that is 47.3% of the total number of nights, were collected. Due to wind speeds above 30 km h^-1, 25 out of the 204 nights were not considered in the final reduction. The useful 179 nights are evenly distributed over the campaign period. The median seeing value for the whole period is = 0.52. There are differences during the year: the best season gives = 0.42, the worst = 0.67. Each night was divided into three intervals, although data for each of the three intervals were not always available. Generally, there is an improvement in the seeing during the course of a night. The results are compared to the seeing values of Gamsberg/Namibia and ESO/La Silla.     

Improving groundwater-flow modeling using optimal zoning methods

Hydraulic conductivity sometimes exhibits complicated spatial variation over a site. A thorough understanding of the spatial distributions of hydraulic conductivity helps to make deterministic models of groundwater more accurate. This study presents a novel procedure that combines simulated annealing algorithms (SA) and the shortest distance method (SD) with the modular three-dimensional groundwater flow model (MODFLOW). The procedure is applied to a hypothetical site with groundwater-monitoring wells to minimize the difference between simulated and observed hydraulic head for optimal zoning of the spatial distribution of hydraulic conductivity. The results of this optimal zoning method indicate that this new procedure not only improves the efficiency of optimization, but also increases the probability of finding the global optimum, minimizing the errors of the hydraulic head simulated by MODFLOW in two scenarios, one with known and the other with unknown hydraulic conductivity. The results also illustrated that the procedure can effectively determine and delineate hydrogeological zones.     

工业CT技术在卫星产品检测中的应用

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。     

相位激发极化法应用研究

相位激发极化法是一种频率域激发极化方法,可直接测量电场电压与供电电流之间的绝对相位差。由于该方法对仪器精度要求较高,因而国内有关实际应用方面的资料相对较少。在金属矿产勘查中,目前国内大多采用时间域激发极化方法,测量岩矿石的极化率或充电率。虽然频率域激发极化法也有应用,但主要采用双频或多频测量,利用视频散率参数进行解释,野外测量工作量较大,测量精度相对较低。近几年,利用相位激发极化法在科研、生产中做了一些工作,这里介绍相位激发极化法模型试验及数据反演结果,岩矿石标本时间域(充电率)和频率域(相位)测试对比结果,以及实际应用实例及数据反演结果。应用结果表明,用相位激发极化法在矿产勘查中可以取得较好的勘察效果,并能在今后的工作中发挥更大的作用。     

利用IRS-P6卫星数据制作遥感影像地图

本文介绍了以IRS-P6卫星数据作为信息源完成大兴安岭林区的遥感影像地图制作的方法, 通过试验初步认识到:利用IRS-P6卫星数据制作遥感影像地图,可以满足1:50000、 1:25000比例尺的平面制图精度要求,在一些专业和专题应用中可以放大到1:15000比例尺使用。