The failure of a lava dam 165,000 yr ago produced the largest known flood on the Colorado River in Grand Canyon. The Hyaloclastite Dam was up to 366 m high, and geochemical evidence linked this structure to outburst-flood deposits that occurred for 32 km downstream. Using the Hyaloclastite outburst-flood deposits as paleostage indicators, we used dam-failure and unsteady flow modeling to estimate a peak discharge and flow hydrograph. Failure of the Hyaloclastite Dam released a maximum 11 × 109 m3 of water in 31 h. Peak discharges, estimated from uncertainty in channel geometry, dam height, and hydraulic characteristics, ranged from 2.3 to 5.3 × 105 m3 s−1 for the Hyaloclastite outburst flood. This discharge is an order of magnitude greater than the largest known discharge on the Colorado River (1.4 × 104 m3 s−1) and the largest peak discharge resulting from failure of a constructed dam in the USA (6.5 × 104 m3 s−1). Moreover, the Hyaloclastite outburst flood is the oldest documented Quaternary flood and one of the largest to have occurred in the continental USA. The peak discharge for this flood ranks in the top 30 floods (>105 m3 s−1) known worldwide and in the top ten largest floods in North America. 相似文献
A conceptual framework for characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems is presented, based on the features of the site conditions and analyses of the water bursting and mine inundation events of the North China coal basin. Comprehensive analyses of the hydrogeological conditions for establishment of the three-dimensional groundwater flow systems of the North China coal basin revealed different vertical hydraulic connection paths or channels. These connections include karst collapse columns, fault or fracture zones, buried weathering zones, and fracture networks in aquitards, within the multilayered groundwater flow systems. Also examined, was the effect of the primary features of the flow system and those different connection paths on water bursting and discharge into the underground coal mines. It was demonstrated that appropriately identifying and adequately understanding the three-dimensional multilayered groundwater flow systems and those various vertical hydraulic connection mechanisms are critical for appropriately preventing water bursting hazards and predicting water discharge into underground mines. A valuable guideline is presented on characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems.
Resumen Un cadre de travail conceptuel pour la caractérisation du jaillissement et de la vidange des eaux dans les mines à plusieurs niveaux d'écoulement est présenté, basé sur les conditions et l'analyse sur site du jaillissement des eaux et des inondations dans les bassins charbonneux du Nord de la Chine. L'analyse compréhensive des conditions hydrogéologiques des systèmes d'écoulement tridimensionnel de ces bassins, révèle des trajets ou des chenaux qui sont autant de connections hydrauliques verticales. Ces connections comprennent des effondrement karstiques en colonne, des zones de fractures et de failles, des zones d'altération, des réseaux de fractures dans les aquitards, dans le système hydrogéologique multicouche. L'influence des caractéristiques primaires du système d'écoulement et de ces différentes connections sur le jaillissement et la vidange dans les mines, est également examiné. Il a été démontré que l'identification appropriée et la compréhension adéquate du système d'écoulement souterrain multicouche et tridimensionnel, et des mécanismes variés de connection hydraulique verticale est critiquée pour prévenir de manière appropriée les risques de jaillissement et de vidange dans les mines. Des guidelines valorisables sont présentées, pour la caractérisation du jaillissement et de la vidange dans de tels systèmes.
Résumé Se presenta un marco conceptual para la de caracterización de la despresurización y descarga de agua a minas subterráneas con sistemas de acuíferos de múltiples niveles, el cual se basa en las condiciones del sitio, análisis de la despresurización de agua e inundaciones de minas en la cuenca de carbón del norte de la China.Un análisis comprehensivo de las condiciones hidrogeológicas para el establecimiento de los sistemas de flujo de agua de tri-dimensionales en la cuenca de carbón del norte de la China ha revelado diferentes canales hidráulicos verticales. Estas conexiones incluyen columnas de karst colapsadas, fallas o zonas de fracturas, zonas de regalita hundida y redes de fracturas en zonas de poca permeabilidad dentro de los sistemas de flujo de múltiples niveles.También se investigó el efecto de los rasgos primarios del sistema de flujo y los diferentes canales conectivos sobre la despresurización y descarga de agua a minas subterráneas. Se demostró que el entendimiento e identificación adecuada de los sistemas de acuíferos de múltiples niveles en tres dimensiones es crítico para prevenir apropiadamente la despresurización y descarga de agua a minas subterráneas. Se presentan lineamientos valiosos en relación con la despresurización y descarga de agua a minas subterráneas en sistemas de flujo de múltiple nivel.
The hydraulic behaviour of the karst aquifer in the Hubelj spring catchment area (SW Slovenia) was studied by using an indirect
research method based on natural tracers. The variations of natural tracers (in precipitation and in groundwater) during the
storm event made possible the separation of the Hubelj spring storm hydrograph by the three-component separation technique.
The results produced information on the aquifer recharge, storage and discharge processes, as well as on the mechanisms that
affected them. They verified the so-called epikarst hypothesis presuming that an important part of a karst aquifer recharge
reaches rapidly and intensively from the epikarst zone. It was demonstrated that epikarst water could occupy up to 50% of
the spring discharge during precipitation events. This phenomenon could have important consequences on protection and management
of the problems of karst aquifers, including engineering problems in karst areas. With this respect the results could give
way to new engineering ideas. 相似文献
Permeability is one of the most important parameters in the design of hydraulic backfilling of mine stopes. A simple and reproducible
method was developed for preparing reconstituted hydraulic fill sample in the laboratory, that is representative of the hydraulic
fill in the mine stope, replicating the slurry sedimentation process taking place in the mine. Constant head and falling head
permeability tests were carried out on the samples, giving consistent results. A brick permeameter was developed to study
the flow characteristics of the porous barricade bricks under one-dimensional flow, simulating the flow conditions in the
mine. Three different methods were used to determine the permeability of the brick and the results showed very good agreement.
This is the first rational attempt to measure the permeability of the porous barricade bricks that are used to close the horizontal
access drives in the mines, thus retaining the hydraulic fill. The measurements show that the permeability of the barricade
brick is about two to three orders of magnitude greater than that of the hydraulic fill. 相似文献
The current conceptual model of the unconfined karstic aquifer in the Yucatan Peninsula, Mexico, is that a fresh-water lens
floats above denser saline water that penetrates more than 40 km inland. The transmissivity of the aquifer is very high so
the hydraulic gradient is very low, ranging from 7–10 mm/km through most of the northern part of the peninsula. The computer
modeling program AQUIFER was used to investigate the regional groundwater flow in the aquifer. The karstified zone was modeled
using the assumption that it acts hydraulically similar to a granular, porous medium. As part of the calibration, the following
hypotheses were tested: (1) karstic features play an important role in the groundwater-flow system; (2) a ring or belt of
sinkholes in the area is a manifestation of a zone of high transmissivity that facilitates the channeling of groundwater toward
the Gulf of Mexico; and (3) the geologic features in the southern part of Yucatan influence the groundwater-flow system. The
model shows that the Sierrita de Ticul fault, in the southwestern part of the study area, acts as a flow barrier and head
values decline toward the northeast. The modeling also shows that the regional flow-system dynamics have not been altered
despite the large number of pumping wells because the volume of water pumped is small compared with the volume of recharge,
and the well-developed karst system of the region has a very high hydraulic conductivity.
Electronic Publication 相似文献
The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site. 相似文献
A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.
The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth. 相似文献