Characteristics of air flow over Andaman islands including precipitation

The characteristics of simulated air flow over Andaman Islands are studied with a two-dimensional version of the University of Virginia meso scale model (UVMM). Using the observed synoptic data as initial conditions, 24 hr simulations are obtained for a day each in April and November. These days are chosen to study the variations in the simulated flow pattern under different synoptic conditions including precipitation effects. A large scale condensation scheme is employed to consider the effect of latent heat release on the perturbations. The results show that the latent heat released by condensation strengthens the intensity of perturbations and the topography accelerates the arrival of sea breeze by about an hour. The model-simulated results, given in graphical form, are discussed and compared with available observations.     

DIAGNOSTIC ANALYSIS AND VERIFICATION OF PREDICTION OF THE TROPICAL PACIFIC SEA SURFACE TEMPERATURE ANOMALIES DURING 1997 ~ 1998

By comparing with ENSO events that ever happened in the history, the basic features and probable causes of the anomalous sea surface temperature of the tropical Pacific Ocean during 1997 and 1998 have been analyzed diagnostically. It is found that the 1997/1998 El Nino had significant abnormalities and peculiarities. It differs from the previous El Ni?o events falling into the simple “eastern pattern” or “western pattern”. The predictions of 1997/1998 El Ni?o event have also been tested with an intermediate ocean-atmosphere coupled dynamic model. The results show that the skills of the 0～24 lead month forecasts for the warm event are all above 0.5. The predictions of the mature phase and the later stages of the warm event are better than those of the beginning phase.     

Influence of Temporal Variations in River Discharge, pH, Alkalinity and Ca on the Speciation and Concentration of Heavy Metals in Some Mining Polluted Rivers

Dissolved (dialysis in situ) and total concentrations ofCu, Zn, Cd and Al in eight mining polluted rivers in the Røros area, central Norway, were determinedby atomic absorption spectrometry (flame and graphite furnace) and compared to pH, Caconcentration and alkalinity through seasonal variations in river discharge. Totalconcentrations of the metals were highest during early spring flood and during summer andautumn rain episodes. Dissolved concentrations also increased as the spring floodproceeded, but small discharge peaks within this 2 month period as well as a considerableautumn flood episode appeared to lower rather than to raise the dissolved metal concentrations.Consequently the dissolved fractions of Zn, Cd and Al showed a significant negative correlationwith river discharge, and were low at the discharge peaks. Possibly high sediment concentrationsoccurring at high flood conditions more than counteracted desorption induced by pHdecrease, and led to decreased dissolved fractions through adsorption. Cu speciationon the other hand seemed to be more closely linked to pH. Alkalinity and Ca concentration,both assumed to protect aquatic life from metal pollution, were significantly lowerduring episodes with high Cu and Al total concentrations.     

Numerical simulations of katabatic jumps in coats land,Antartica

A non-hydrostatic numerical model, the Regional Atmospheric Modeling System (RAMS), has been used to investigate the development of katabatic jumps in Coats Land, Antarctica. In the control run with a 5 m s^-1downslope directed initial wind, a katabatic jump develops near the foot of the idealized slope. The jump is manifested as a rapid deceleration of the downslope flow and a change from supercritical to subcritical flow, in a hydraulic sense, i.e., the Froude number (Fr) of the flow changes from Fr > 1 to Fr> 1. Results from sensitivity experiments show that an increase in the upstream flow rate strengthens the jump, while an increase in the downstream inversion-layer depth results in a retreat of the jump. Hydraulic theory and Bernoulli's theorem have been used to explain the surface pressure change across the jump. It is found that hydraulic theory always underestimates the surface pressure change, while Bernoulli's theorem provides a satisfactory estimation. An analysis of the downs balance for the katabatic jump indicates that the important forces are those related to the pressure gradient, advection and, to a lesser extent, the turbulent momentum divergence. The development of katabatic jumps can be divided into two phases. In phase I, the t gradient force is nearly balanced by advection, while in phase II, the pressure gradient force is counterbalanced by turbulent momentum divergence. The upslope pressure gradient force associated with a pool of cold air over the ice shelf facilitates the formation of the katabatic jump.     

A comparison of channel-base currents and optical signals for rocket-triggered lightning strokes

A comparative analysis has been performed of the channel-base current and light waveforms for four rocket-triggered lightning strokes. It has been found that the current and light signals at the bottom of the channel exhibit a linear relationship (direct proportionality) in their rising portions. However, just after the peaks the linearity disappears, and the light signals usually decrease faster than the currents during the next several microseconds. Later, this trend is reversed and in some cases the light signals show another rising trend, even when the currents continue to decrease. The linear light/current relationship for the rising portions of the waveforms appears to be the same for different strokes. The findings support the idea of evaluating the variation of return stroke current along the lightning return stroke channel using light signals, provided that evaluation is limited to the rising portions of those signals and assuming that the light/current relationship observed at the bottom of the channel holds at other heights.     

Channel morphology and its impact on flood passage, the Tianjiazhen reach of the middle Yangtze River

The Tianjiazhen reach of the middle Yangtze is about 8 km long, and characterized by a narrow river width of 650 m and local water depth of > 90 m in deep inner troughs, of which about 60 m is below the mean sea level. The troughs in the channel of such a large river are associated with regional tectonics and local lithology. The channel configuration plays a critical role in modifying the height and duration of river floods and erosion of the riverbed. The formation of the troughs in the bed of the Yangtze is considered to be controlled by sets of NW–SE-oriented neotectonic fault zones, in which some segments consist of highly folded thick Triassic limestone crossed by the Yangtze River. Several limestone hills, currently located next to the river channel, serve as nodes that create large vortices in the river, thereby accelerating downcutting on the riverbed composed of limestone highly susceptible to physical corrosion and chemical dissolution. Hydrological records indicate that the nodal hills and channel configuration at Tianjiazhen do not impact on normal flow discharges but discharges > 50,000 m³s^− 1 are slowed down for 2–3 days. Catastrophic floods are held up for even longer periods. These inevitably result in elevated flood stages upstream of prolonged duration, affecting large cities such as Wuhan and a very large number of people.     

A method to estimate hydraulic conductivity from bulk geochemical compositions

A new method has been developed to estimate the hydraulic conductivity in unconsolidated aquifers. The method uses bulk geochemical compositions correlated with hydraulic conductivities measured by pumping tests. The concept is based on a general rule that hydraulic conductivity is principally controlled by grain-size distribution and particle shape,both of which relate to mineralogical composition. Using a MINLITH algorithm, normative mineralogical compositions can be derived from bulk geochemical compositions economically and expediently, and then correlated to the hydraulic conductivity determined by pumping tests in the field. In this study, 202 sediment samples from nine unconsolidated aquifers were analyzed by X-ray fluorescence. Although hydraulic conductivity does not show a definite relationship with geochemical compositions, it does demonstrate a linear logarithmic equation to the content of normative earthy minerals. However, linear regressed equations should not be applied to aquifers composed of medium to coarse sand and gravel sizes due to interference from lithic fragments. In addition, this equation tends to overestimate hydraulic conductivity possibly because the effect of compaction is ignored in this study.     

Post-drilling destabilization of temperature profile in borehole Yaxcopoil-1, Mexico

As part of the International Continental Scientific Drilling Program (ICDP), the 1.5-km-deep borehole Yaxcopoil-1, located in the Chixculub meteor impact structure in Mexico, has undergone further study after drilling operations ceased. Temperature logs were repeated ten times at intervals 0.3–0.8, 15, 24 and 34 months after borehole shut-in. The logs bear a distinct signature of transient heat transfer by groundwater flow manifested by a gradual distortion of the linear temperature profile when a cold wave of 0.8–1.6°C amplitude was detected propagating downward from 145 to 312 m at a rate of 4–6 m/month. To understand the nature of this moving anomaly, a 20-day monitoring of the cold wave was carried out at a depth of 307 m that showed further cooling of 0.6°C during the first 16 days of the passage followed by temperature stabilisation. As an explanation of this unusual phenomenon, a theory is proposed, whereby the drilling mud has accumulated within the overlying and cooler highly porous and permeable karstic rocks during the drilling and migrates downward. The observed migration rate suggests a permeability higher than 10^?11 m². This indicates a high vulnerability to contamination of the only freshwater aquifer in the Yucatan region.     

A case study to verify methods for estimating transmissivity distributions along boreholes

Two methods, both using data from fixed-interval-length hydraulic tests and geological mapping on different scales, have been utilised to estimate transmissivity distributions of individual fractures. Individual fracture properties are of importance in estimating transport of water and solutes; they influence the spreading of grout when sealing tunnels. One of the methods is non-parametric, while the other is based on combinatorics and the multiplication principle. The study verified the usefulness of both methods for estimating the probability of conductive and non-conductive fractures, and the transmissivity distributions. Data for estimating transmissivity distributions originate from flow logging of a borehole in Sweden. Fracture frequency data are from core logging and images using a borehole image processing system (BIPS). Estimated transmissivity distributions, based on flow log data from 3-m sections (test scale length, L: 3 m, and step length, dL: 3 m), were compared with transmissivities obtained directly from detailed, overlapping flow logging which identify individual conductive fractures (test scale, L: 0.5 m, step length, dL: 0.1 m). The latter data are considered to be an acceptable approximation of the individual fracture transmissivities; the agreement, compared with the calculated transmissivity distributions based on 3-m section data, is good for both methods.

---

Resumen Se han utilizado dos métodos, ambos procesando datos de pruebas hidráulicas de longitud e intervalo fijo y mapas geológicos en distintas escalas, para estimar las distribuciones de transmisividad de fracturas individuales. Las propiedades de fracturas individuales son de importancia para estimar el transporte de agua y solutos; las propiedades influyen en la propagación de lechada al sellar túneles. Uno de los métodos es no paramétrico mientras que el otro se basa en el principio de multiplicación y combinatorio. El estudio verifica la utilidad de ambos métodos para estimar la probabilidad de fracturas conductivas y no conductivas y las distribuciones de transmisividad. Los datos para estimar las distribuciones de transmisividad se originan del registro de flujo de un pozo en Suecia. Los datos de frecuencia de fracturas provienen de registros de núcleo e imágenes usando un Sistema de Procesamiento de Imágenes de Pozo (BIPS). Se compararon las distribuciones estimadas de transmisividad basadas en datos del registro de flujo en secciones de 3 m (longitud de escala de la prueba L: 3 m, y escalón de longitud dL: 3 m), con transmisividades obtenidas directamente de registros detallados de flujo superpuesto el cual identifica fracturas conductivas individuales (escala de la prueba, L: 0.5 m, escalón de longitud, dL: 0.1 m). Los últimos datos se consideran una aproximación aceptable de las transmisividades de fracturas individuales; la consistencia, comparada con las distribuciones de transmisividad calculada basadas en datos de sección de 3 m, es buena para ambos métodos.

---

Résumé Deux méthodes ont été testées afin d’estimer la distribution des transmissivités de fractures unitaires; toutes deux utilisent des données issues de tests hydrauliques effectués à intervalles réguliers et de cartographies géologiques à plusieurs échelles. La connaissance des propriétés des fractures unitaires est importante pour estimer le transport d’eau et de solutés; elles influencent en outre l’étalement du coulis lors du scellement des tunnels. La première méthode est non-paramétrique, et la seconde repose sur l’analyse combinatoire et le principe de multiplication. Cette étude a vérifié l’utilité des deux méthodes pour estimer la probabilité d’occurrence de fractures conductrices et non-conductrices, et la distribution des transmissivités. Les distributions des transmissivités ont été estimées à partir de diagraphies effectuées sur un forage situé en Suède. Les densités de fracturation proviennent de carottages et d’imagerie BIPS (Borehole Image Processing System). Les distributions estimées des transmissivités, basées sur des diagraphies de flux effectuées sur des sections de 3 m (échelle du test L:3 m; pas dL:3 m), ont été comparées aux transmissivités obtenues sur des diagraphies de flux détaillées et se chevauchant, identifiant les fractures conductrices unitaires (échelle du test L: 0.5 m ; pas dL: 0.1 m). Il est admis que ces dernières données représentent une approximation satisfaisante des transmissivités des fractures unitaires; les deux méthodes sont en accord avec les distributions des transmissivités calculées à partir des données acquises sur des sections de 3 m.

     

城市地下排水网雨水入流预测模型研究

引入水箱模型进行城市地下排水设施降雨一侵入水的模拟，探讨了初期蓄流值对模拟结果的影响并提出了相应的解决办法；由于模型参数多、非线性，参数的率定采用通用优化分析计算平台PowerFit，并获得了满意的结果，表明：①水箱模型适用于地下排水设施雨洪模拟和预测，可为市政规划设计和城市灾害预报提供可靠依据；②PowerFit全局优化能力强、简单易用，可广泛应用于水利水电等工程领域中的优化计算。