2D Wave setup behind submerged breakwaters

In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the sea level in the protected area, which is relevant to the whole shadow zone circulation, including alongshore currents and seaward flows through the gaps. This study examines such a leading hydraulic parameter under the simplified hypothesis of 2D motion and presents a prediction model that has been validated by a wide ensemble of experimental data. Starting from an approach originally proposed by Dalrymple and Dean [(1971). Piling-up behind low and submerged permeable breakwaters. Discussion note on Diskin et al. (1970). Journal of Waterways and Harbors Division WW2, 423–427], the model splits the rise of the mean water level into two contributions: one is due to the momentum flux release forced by wave breaking on the structure, and the other is associated with the mass transport process. For the first time, the case of random wave trains has been explicitly considered.     

海底双层管单层连接管道结构受力分析

粘性高的海洋石油通常需要通过海底保温管道加温输送.温度变化会引起管道变形,并在管壁内产生较大的温度应力.同时,管道正常运营期间还受到管道内压、外压、管内流体粘滞力和土体摩擦力等环境荷载的作用.复杂的环境可能导致海底管道轴向应力过大发生破坏.为了提高铺管效率,提出了双层管单层连接管道这一特殊管道形式,并从理论上分析温度变化和环境荷载对该管道的影响,计算正常运行时管道不同位置处横截面内最大Von-Mises应力.最后得到了Von-Mises应力沿管道轴线分布情况,发现内管和单层连接管的应力一般比外管大,变径管和内管的焊缝处是Von-Mises应力最大的地方.     

Experimental investigation of tsunami bore impact pressure on a perforated seawall

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.     

锁块式水下采油树井口连接器性能分析

水下采油树井口连接器是连接采油树和井口的关键设备,对深海水下勘探开发及采油树的安装连接具有不可或缺的重要意义。以一种锁块式水下连接器为例,介绍其结构组成和工作原理,通过有限元建立连接器的三维模型,分析连接器在下放安装工况、连接锁紧工况、正常生产工况和钻完井工况下的连接性能,得出井口与采油树本体接触面作用力、VX钢圈接触应力和锁块受力情况随外部载荷的相互关系。结果表明,VX钢圈在整个过程中都能够保持良好密封,井口与采油树本体接触面未发生分离,弯矩对连接器连接性能影响很大,在额定弯矩作用时连接器部分锁块已发生弹塑性失效。     

Migration and speciation transformation mechanisms of mercury in undercurrent zones of the Tongguan gold mining area,Shaanxi Loess Plateau and impact on the environment

In order to study the migration and transformation mechanism of Hg content and occurrence form in subsurface flow zone of gold mining area in Loess Plateau and its influence on water environment, the field in-situ infiltration test and laboratory test were carried out in three typical sections of river-side loess, alluvial and proluvial strata in Tongguan gold mining area of Shaanxi Province, and the following results were obtained: (1) The source of Hg in subsurface flow zone is mainly caused by mineral processing activities; (2) the subsurface flow zone in the study area is in alkaline environment, and the residual state, iron and manganese oxidation state, strong organic state and humic acid state of mercury in loess are equally divided in dry and oxidizing environment; mercury in river alluvial or diluvial strata is mainly concentrated in silt, tailings and clayey silt soil layer, and mercury has certain stability, and the form of mercury in loess is easier to transform than the other two media; (3) under the flooding condition, most of mercury is trapped in the silt layer in the undercurrent zone where the sand and silt layers alternate with each other and the river water and groundwater are disjointed, and the migration capacity of mercury is far less than that of loess layer and alluvial layer with close hydraulic connection; (4) infiltration at the flood level accelerates the migration of pollutants to the ground; (5) the soil in the undercurrent zone is overloaded and has seriously exceeded the standard. Although the groundwater monitoring results are safe this time, relevant enterprises or departments should continue to pay attention to improving the gold extraction process, especially vigorously rectify the small workshops for illegal gold extraction and the substandard discharge of the three wastes, and intensify efforts to solve the geological environmental problems of mines left over from history. At present, the occurrence form of mercury in the undercurrent zone is relatively stable, but the water and soil layers have been polluted. The risk of disjointed groundwater pollution can not be ignored while giving priority to the treatment of loess and river alluvial landform areas with close hydraulic links. The research results will provide a scientific basis for water conservancy departments to groundwater prevention and control in water-deficient areas of the Loess Plateau.     

海水液压驱动的水下作业工具系统

论文介绍了海水液压作业工具系统的工作原理、关键技术问题及样机和试验结果。该系统同电动、气动或油压工具相比,具有诸多独特的优势,在海洋开发、船舶工程等领域均有广阔的应用前景。     

大比例尺全野外数字化测图

全野外数字化测图的基本思想是将野外采集的各种有关地物和地貌信息转化为数字形式,通过数据接口传输给计算机进行处理,得到内容丰富的电子地图,需要时由电子计算机的图形输出设备(如显示器、绘图仪)绘出地形图或各种专题地图。     

脚靴式海上升压站灌浆连接段强度分析研究

与国内已建成的海上升压站相比,脚靴式海上升压站导管架对桩和套筒间的灌浆连接强度要求更高,完全套用单桩风电结构的分析方法会使结构设计不准确。由于桩和套筒之间设置有剪力键,当特殊情况时还需增加灌浆连接增强钢筋,在地震及撞船作用下容易导致灌浆接触界面分离等破坏,当前尚未有针对此类情况系统的灌浆连接强度校核方法。以某脚靴式海上升压站为例,分析其在在位、撞船、地震、疲劳等多个主控工况下灌浆连接、剪力键及增强钢筋的强度及稳定性,结果表明该海上升压站灌浆连接段满足设计要求,并研究了各参数对灌浆连接段强度的敏感程度,为今后脚靴式海上升压站各主控工况下的灌浆连接段强度分析、优化设计提供参考与借鉴。     

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.