Post-drilling destabilization of temperature profile in borehole Yaxcopoil-1, Mexico

As part of the International Continental Scientific Drilling Program (ICDP), the 1.5-km-deep borehole Yaxcopoil-1, located in the Chixculub meteor impact structure in Mexico, has undergone further study after drilling operations ceased. Temperature logs were repeated ten times at intervals 0.3–0.8, 15, 24 and 34 months after borehole shut-in. The logs bear a distinct signature of transient heat transfer by groundwater flow manifested by a gradual distortion of the linear temperature profile when a cold wave of 0.8–1.6°C amplitude was detected propagating downward from 145 to 312 m at a rate of 4–6 m/month. To understand the nature of this moving anomaly, a 20-day monitoring of the cold wave was carried out at a depth of 307 m that showed further cooling of 0.6°C during the first 16 days of the passage followed by temperature stabilisation. As an explanation of this unusual phenomenon, a theory is proposed, whereby the drilling mud has accumulated within the overlying and cooler highly porous and permeable karstic rocks during the drilling and migrates downward. The observed migration rate suggests a permeability higher than 10^?11 m². This indicates a high vulnerability to contamination of the only freshwater aquifer in the Yucatan region.     

A case study to verify methods for estimating transmissivity distributions along boreholes

Two methods, both using data from fixed-interval-length hydraulic tests and geological mapping on different scales, have been utilised to estimate transmissivity distributions of individual fractures. Individual fracture properties are of importance in estimating transport of water and solutes; they influence the spreading of grout when sealing tunnels. One of the methods is non-parametric, while the other is based on combinatorics and the multiplication principle. The study verified the usefulness of both methods for estimating the probability of conductive and non-conductive fractures, and the transmissivity distributions. Data for estimating transmissivity distributions originate from flow logging of a borehole in Sweden. Fracture frequency data are from core logging and images using a borehole image processing system (BIPS). Estimated transmissivity distributions, based on flow log data from 3-m sections (test scale length, L: 3 m, and step length, dL: 3 m), were compared with transmissivities obtained directly from detailed, overlapping flow logging which identify individual conductive fractures (test scale, L: 0.5 m, step length, dL: 0.1 m). The latter data are considered to be an acceptable approximation of the individual fracture transmissivities; the agreement, compared with the calculated transmissivity distributions based on 3-m section data, is good for both methods.

---

Resumen Se han utilizado dos métodos, ambos procesando datos de pruebas hidráulicas de longitud e intervalo fijo y mapas geológicos en distintas escalas, para estimar las distribuciones de transmisividad de fracturas individuales. Las propiedades de fracturas individuales son de importancia para estimar el transporte de agua y solutos; las propiedades influyen en la propagación de lechada al sellar túneles. Uno de los métodos es no paramétrico mientras que el otro se basa en el principio de multiplicación y combinatorio. El estudio verifica la utilidad de ambos métodos para estimar la probabilidad de fracturas conductivas y no conductivas y las distribuciones de transmisividad. Los datos para estimar las distribuciones de transmisividad se originan del registro de flujo de un pozo en Suecia. Los datos de frecuencia de fracturas provienen de registros de núcleo e imágenes usando un Sistema de Procesamiento de Imágenes de Pozo (BIPS). Se compararon las distribuciones estimadas de transmisividad basadas en datos del registro de flujo en secciones de 3 m (longitud de escala de la prueba L: 3 m, y escalón de longitud dL: 3 m), con transmisividades obtenidas directamente de registros detallados de flujo superpuesto el cual identifica fracturas conductivas individuales (escala de la prueba, L: 0.5 m, escalón de longitud, dL: 0.1 m). Los últimos datos se consideran una aproximación aceptable de las transmisividades de fracturas individuales; la consistencia, comparada con las distribuciones de transmisividad calculada basadas en datos de sección de 3 m, es buena para ambos métodos.

---

Résumé Deux méthodes ont été testées afin d’estimer la distribution des transmissivités de fractures unitaires; toutes deux utilisent des données issues de tests hydrauliques effectués à intervalles réguliers et de cartographies géologiques à plusieurs échelles. La connaissance des propriétés des fractures unitaires est importante pour estimer le transport d’eau et de solutés; elles influencent en outre l’étalement du coulis lors du scellement des tunnels. La première méthode est non-paramétrique, et la seconde repose sur l’analyse combinatoire et le principe de multiplication. Cette étude a vérifié l’utilité des deux méthodes pour estimer la probabilité d’occurrence de fractures conductrices et non-conductrices, et la distribution des transmissivités. Les distributions des transmissivités ont été estimées à partir de diagraphies effectuées sur un forage situé en Suède. Les densités de fracturation proviennent de carottages et d’imagerie BIPS (Borehole Image Processing System). Les distributions estimées des transmissivités, basées sur des diagraphies de flux effectuées sur des sections de 3 m (échelle du test L:3 m; pas dL:3 m), ont été comparées aux transmissivités obtenues sur des diagraphies de flux détaillées et se chevauchant, identifiant les fractures conductrices unitaires (échelle du test L: 0.5 m ; pas dL: 0.1 m). Il est admis que ces dernières données représentent une approximation satisfaisante des transmissivités des fractures unitaires; les deux méthodes sont en accord avec les distributions des transmissivités calculées à partir des données acquises sur des sections de 3 m.

     

Hydraulic properties of the crystalline basement

Hydraulic tests in boreholes, up to 4.5 km deep, drilled into continental crystalline basement revealed hydraulic conductivity (K) values that range over nine log-units from 10⁻¹³−10⁻⁴ m s⁻¹. However, K values for fractured basement to about 1 km depth are typically restricted to the range from 10⁻⁸ to 10⁻⁶ m s⁻¹. New data from an extended injection test at the KTB research site (part of the Continental Deep Drilling Program in Germany) at 4 km depth provide K=5 10⁻⁸ m s⁻¹. The summarized K-data show a very strong dependence on lithology and on the local deformation history of a particular area. In highly fractured regions, granite tends to be more pervious than gneiss. The fracture porosity is generally saturated with Na–Cl or Ca–Na–Cl type waters with salinities ranging from <1 to >100 g L⁻¹. The basement permeability is well within the conditions for advective fluid and heat transport. Consequently, fluid pressure is hydrostatic and a Darcy flow mechanism is possible to a great depth. Topography-related hydraulic gradients in moderately conductive basement may result in characteristic advective flow rates of up to 100 L a⁻¹ m⁻² and lead to significant advective heat and solute transfer in the upper brittle crust. An erratum to this article can be found at     

How can the epikarst zone influence the karst aquifer hydraulic behaviour?

The role of an epikarst zone in the karst aquifer hydraulic behaviour was brought into focus in our studies referring to the catchment area of the Hubelj spring (SW Slovenia). This study points out the significance of effects of the fast preferential flow—epiflow, which is the main factor controlling solute/contaminant transport towards the aquifer saturated zone. The so-called epikarstic hypothesis is verified on the basis of the most significant research results that are supported by the most important findings from the literature.     

Crustal Stress Measurement for Significant Project Construction and Its Application in Design

The hydrofracturing technique has developed into a reliable and practical method for determining the original three-dimensional crustal stress state of underground caverns,the load-bearing capacity of a high pressure cavern itself,and the high pressure hydraulic permeability of rock masses,and has also been extensively used in disposal of nuclear waste,long and deeply-buried traffic channels and high-pressure cavern engineering for hydraulic power plants.The practice shows that the comprehensive measurement of the physical parameters of the rock mass and taking full use of the wall rock load-bearing capacity to optimize the engineering design hold are very useful in ensuring the engineering safety and improving the design level.     

滇西北独龙江花岗岩及岩浆作用特征

滇西北独龙江地区的燕山期花岗岩可划分为6个单元，归并为早，晚2个序列。早期－龙岗不若序列由巴坡，东哨启等2个单元组成，生成于晚侏罗世－早白垩世，为壳幔混源岩浆形成，属火山弧花岗岩，是班公湖－东巧－怒江结合带俯冲消减的产物，晚期－独龙江序列由机独，其期，麻毕当，斯拉罗等4个单元组成，生成于晚白晋世，为壳源花岗岩，形成于同碰撞环境。是班公湖－东巧－怒江结合带碰撞造山的物质记录。     

PHYSICAL MODELING OF HYDRAULIC DESILTATION IN TAPU RESERVOIR

1 INTRODUCTIONIn recent years, the concePt of long-term sustained use of reservoirs has been addressed because areservoir is very much considered to be a nonrenewable resource (Morris and Fan, l998). Technically,many options for reservoir sedAnentation control can be utlized to pursue the sustainable develoPment ofwater resources. In general, reduction of incoming sedimen yields from watersheds is often emPloyedin conjunction with hydraulic methods such as flushing or density currnt vot…     

EFFECTIVE DISCHARGE CALCULATION GUIDE

1 mTRonvcnox: moareS Aun CoxcmSAJluvial rivers have the pOtenhal to adjust their shaPe and dimensions to all flows that tranSPOrtsediment, but Inglis (l94l) suggested that, for rivers that are in regime, a single steady flow could beidenhfied which would Produce the same bankfll dimensions as the natural sequence of events. Hereferrd to this now as the dondnan discharge.Wolman and Mller (l960) idenhfied that the flow doing most bed material transPort over a period ofyears may be taken tO…     

A model of the early evolution of karst aquifers in limestone in the dimensions of length and depth

A new model of the early evolution of limestone karst aquifers in the dimensions of length and depth is presented. In its initial state the aquifer consists of a rock massive with evenly spaced fractures of about 50 μm aperture widths with an hydraulic conductivity of 10⁻⁷ ms⁻¹. In addition to this a coarser network of prominent fractures with aperture widths of several 100 μm is also present. Boundary conditions of constant recharge 450 mm/year, or constant head from the input of allogenic streams are imposed. First the position of the water table in the aquifer is calculated, then dissolutional widening during a time step in all the fractures below the water table is found by use of the well-known nonlinear dissolution kinetics of limestone. This is iterated and the position of the water table as well as the fracture widths are found as a function of time. In the case of constant recharge to a karst plateau, the water table in any case drops to base level and conduits there propagate from the spring headwards. If constant head conditions are valid the position of the water table remains almost stable and conduits propagate along the water table from the input towards the spring. There is competition between conduit evolution along prominent fractures and along tight fissures close to the water table. In any case under constant head conditions one of these pathways wins, and early karst evolution is terminated by a breakthrough event with an explosive increase of the flow through the aquifer until constant head conditions break down. Depending on the boundary conditions of constant head or constant recharge or a combination of both it is possible to describe models of cave genesis, which have been derived from field evidence, such as the water table models of Swinnerton and Rhoades as well as the four-state model by Ford and Ewers (Can. J. Earth Sci., 15 (1978) 1783).     

Correlation of hydraulic conductivity with stratigraphy in a fractured-dolomite aquifer, northeastern Wisconsin, USA

This study integrated surface and subsurface stratigraphic data with geophysical logs and hydrogeologic data in order to characterize the hydraulic properties of the Silurian dolomite in northeastern Wisconsin. Silurian stratigraphy consists of predictable alternations of characteristic facies associations. A vertical profile of hydraulic conductivity, obtained from short-interval packer tests in a core hole that penetrates a majority of the Silurian section, indicates that hydraulic conductivity ranges over five orders of magnitude (10^–1 to 10^–6 cm/s). Matrix conductivity is generally low and varies with texture; the finer-grained restricted-marine and transitional facies being less permeable than the coarser-grained open-marine facies. High-conductivity values are generally associated with bedding-plane fractures, and fracture frequency is greater in the restricted-marine facies. High-flow features in 16 wells were identified using fluid-temperature/resistivity and heat-pulse flowmeter logs. Natural-gamma logs were used to identify the stratigraphic position of flow features in each well and to correlate flow features to specific stratigraphic horizons. By combining stratigraphic, geophysical, and hydrogeologic data, 14 high-permeability zones within the Silurian aquifer have been identified and correlated in wells more than 16 km apart. These zones parallel bedding, appear most pronounced at contacts between contrasting lithologies, and are most abundant in restricted-marine lithologies. Electronic Publication