A method to estimate hydraulic conductivity while drilling

A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.

The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth.     

抽放瓦斯定向钻孔施工技术的研究

介绍了抽放瓦斯定向钻孔施工技术的主要设备、钻具及仪器，组合钻具及钻进工艺参数，并通过几个工程实例，说明了该项技术的应用效果。     

滇西北石鼓片岩变质变形特征及其划分

滇西北金沙江结合带东侧的石鼓变质岩系，可划分为石鼓岩群和巨甸岩群。石鼓岩群受区域动力热流变质作用改造，主期变形环境为中、深部构造相；巨甸岩群受区域低温动力变质作用改造，与之相伴的构造形迹属中、浅部构造相。石鼓岩群包含羊坡岩组和露西岩组，巨甸岩群可进一步划分为陇巴岩组和塔城岩组。同一岩群的岩组，变质作用、构造变形特征相同，但变质岩石组合及原岩特征却有明显差别。     

液压油污染控制

工程机械液压系统故障大约有70T是由液压油污染引起的，本文阐述了水电施工机械设备液压油的污染对液压系统的影响及如何控制液压油污染，保证其清洁度，从而预防液压系统故障。     

南宁、百色盆地红土风化壳的地球化学特征及其环境意义*

本文以广西南宁盆地那桐风化壳,及百色盆地江泽风地壳的大量土体化学分析数据为依据,进行了第四纪红土的确认、形成、分布和土壤肥力状况。以及通过地球化学强度、硅铁系数、硅铝系数等指标进行了两风化壳的对比研究。同时,还探讨了风化壳的发育过程及其与环境的关系。     

横山中侏罗世延安期响水曲流河道砂体的储集性研究

响水砂体是一出露比较完整的中生代的曲流河河道沉积。通过大断面写实的研究方法，运用沉积体系分析、层序地层分析、砂体内部沉积构成分析等方法，比较细致地划分了砂体内部成因单元和储层岩性相，从成因上研究了影响油气运移的沉积因素。通过砂体断面上一定间距的比较均匀的采样，并根据测试成果编图，展示了各种孔沙参数在空间的变化特点及其与各种界面、沉积水动力能量的联系，并依此总结曲流河点坝渗透率的分布模式。     

黑龙江省东部跃进山群中绿片岩的地球化学特征及地质意义

跃进山群出露位于佳木斯地块和那丹哈达地体之间，是完达山造山带的组成部分。它由大陆斜坡相沉积物、大洋中脊型玄武岩和洋岛型玄武岩组成，其中有镁铁－超镁铁质岩块体。它不是一个地层单位，而是与活动大陆边缘板块俯冲作用有关的蛇绿混杂岩     

红层软岩隧洞围岩变形破坏机制研究

红层软岩的物质组成、化学成分、物理力学性质等方面在国内外已有较系统的研究,但对软岩隧道围岩的变形破坏机理及其治理一直是工程技术人员关心问题。通过对回龙宫隧洞的地质环境分析及有限元数值计算,阐明了红层隧洞围岩的膨胀变形破坏机理,最后提出了在此类围岩中修建水工隧洞的过程中,防止围岩变形破坏的建议。     

滇西北新生代逆冲推覆构造

滇西北地区新生代逆冲推覆构造较为发育，从西到东可分出走向NS、相互平行的4带：澜沧江带，云岭带，石钟山带和剑川-洱源带。其中，澜沧江带与云岭带组成对冲格局，云岭带又与石钟山带组成反冲格局，石钟山带与剑川-洱源带又组成对冲格局。参与逆冲推覆的地层主要是中生代三叠系、侏罗系、白垩系及新生代云龙组、宝相寺组，推覆体由石炭系、二叠系、上三叠统岩石组成。逆冲推覆时间为喜马拉雅期。     

深层水泥土搅拦桩在软土地基处理中的应用

通过对深层水泥土搅拌桩的加固机理及复合地基承载力性状的简要分析,根据国家现行规范,结合具体地基处理工程实例,对深层水泥搅拌桩在软土地区地基加固处理中的方案选择、设计、施工及检测中的常见技术要点作初步探讨。