A relationship between red tide outbreaks and urban development along the coasts of Guangdong Province

Red tides are one of the main coastal catastrophic events in Guangdong Province of southern China. The comparison between the number of red tide events and the development indexes of cities along the coasts of the province shows that the regional differences in red tide outbreaks has close relations with the coastal urban developments. The cause for an initiation of red tide blooms may be natural factors, while wastewater caused by the fast development of population, industry and aquiculture of the coastal cities enhanced the blooms. It may explain why the two periods of frequent outbreaks of the red tides over the last two decades matched the urban developments in the coastal areas of Guangdong not only spatially but also temporally. The red tides in the first period were restricted only to the coasts of middle Guangdong, where urbanization process was at a higher speed than the other coastal areas of the province. In the second period, fast development of the coastal cities in eastern Guangdong led to an increase in the occurrence of red tides in local sea areas of the same coasts.     

福建沿海土壤地球化学分类及基准值研究

利用多目标区域地球化学调查成果,探讨了福建沿海土壤地球化学分类的方法,提出了分类命名方案和诊断标准,将研究区土壤按SiO₂含量划分为铁铝土、硅铝土、铝硅土、硅土4个大类,其中硅铝土又分为一般硅铝土、铁质硅铝土、钾质硅铝土、硫铁质硅铝土4个亚类,铝硅土分为一般铝硅土和钾质铝硅土2个亚类;提出了在各种统计量中,中值比较客观地反映元素含量背景,适合作为基准值;给出了研究区各类土壤的分布图和52种元素及pH的基准值,分析了其成因和农业利用情况。     

河南内乡-淅川-带的虎睛石矿床及开发利用

研究区虎睛石矿床在地质特征、矿物组合、化学成分及琢雕效果等方面与国外虎睛石矿床是完全不同的，属于一种特殊的罕见类型。在分析虎睛石地质特征、开发利用现状的基础上，认为该区的虎睛石资源丰富，琢雕效果好，在国内外市场上具有一定的竞争力和良好的开发利用前景。     

吉林省发展矿泉水产业的战略思考

本文在分析吉林省矿泉水资源特征和矿泉水事业发展现状的基础上，结合国内外矿泉水产业的发展趋势，指出了当前吉林省矿泉水产业发展中存在的问题，提出了快速发展矿泉水产业的对策和建议。     

Sedimentation rates in the Wanggang salt marshes, Jiangsu

1 IntroductionLand-ocean interaction in coastalzone is one of the key m atters of the International G eosphereand Biosphere Program (IG BP). The key problem s of the second phase in the next decadeinclude the m aterial cycle, the system evolution process …     

The Okavango giant mafic dyke swarm (NE Botswana): its structural significance within the Karoo Large Igneous Province

The structural organization of a giant mafic dyke swarm, the Okavango complex, in the northern Karoo Large Igneous Province (LIP) of NE Botswana is detailed. This N110°E-oriented dyke swarm extends for 1500 km with a maximum width of 100 km through Archaean basement terranes and Permo-Jurassic sedimentary sequences. The cornerstone of the study is the quantitative analysis of N>170 (exposed) and N>420 (detected by ground magnetics) dykes evidenced on a ca. 80-km-long section lying in crystalline host-rocks, at high-angle to the densest zone of the swarm (Shashe area). Individual dykes are generally sub-vertical and parallel to the entire swarm. Statistical analysis of width data indicates anomalous dyke frequency (few data <5.0 m) and mean dyke thickness (high value of 17 m) with respect to values classically obtained from other giant swarms. Variations of mean dyke thicknesses from 17 (N110°E swarm) to 27 m (adjoining and coeval N70°E giant swarm) are assigned to the conditions hosting fracture networks dilated as either shear or pure extensional structures, respectively, in response to an inferred NNW–SSE extension. Both fracture patterns are regarded as inherited brittle basement fabrics associated with a previous (Proterozoic) dyking event. The Okavango N110°E dyke swarm is thus a polyphase intrusive system in which total dilation caused by Karoo dykes (estimated frequency of 87%) is 12.2% (6315 m of cumulative dyke width) throughout the 52-km-long projected Shashe section. Assuming that Karoo mafic dyke swarms in NE Botswana follow inherited Proterozoic fractures, as similarly applied for most of the nearly synchronous giant dyke complexes converging towards the Nuanetsi area, leads us to consider that the resulting triple junction-like dyke/fracture pattern is not a definitive proof for a deep mantle plume in the Karoo LIP.     

Origin and evolution of Pliocene–Pleistocene granites from the Larderello geothermal field (Tuscan Magmatic Province, Italy)

Extensive, mainly acidic peraluminous magmatism affected the Tuscan Archipelago and the Tuscan mainland since late Miocene, building up the Tuscan Magmatic Province (TMP) as the Northern Apennine fold belt was progressively thinned, heated and intruded by mafic magmas. Between 3.8 and 1.3 Ma an intrusive complex was built on Larderello area (Tuscan mainland) by emplacement of multiple intrusions of isotopically and geochemically distinct granite magmas. Geochemical and isotopic investigations were carried out on granites cored during drilling exploration activity on the Larderello geothermal field. With respect to the other TMP granites the Larderello intrusives can be classified as two-mica granites due to the ubiquitous presence of small to moderate amounts of F-rich magmatic muscovite. They closely resemble the almost pure crustal TMP acidic rocks and do not show any of the typical petrographic features commonly observed in the TMP hybrid granites (enclaves, patchy zoning of plagioclase, amphibole clots). On the basis of major and trace elements, as well as REE patterns, two groups of granites were proposed: LAR-1 granites (3.8–2.3 Ma) originated by biotite-muscovite breakdown, and LAR-2 granites (2.3–1.3 Ma) generated by muscovite breakdown. At least three main crustal sources (at 14–23 km depth), characterized by distinct ε_Nd(t) and ⁸⁷Sr/⁸⁶Sr values, were involved at different times, and the magmas produced were randomly emplaced at shallow levels (3–6 km depth) throughout the entire field. The partial melting of a biotite-muscovite-rich source with low ε_Nd(t) value (about −10.5) produced the oldest intrusions (about 3.8–2.5 Ma). Afterwards (2.5–2.3 Ma), new magmas were generated by another biotite-rich source having a distinctly higher ε_Nd(t) value (−7.9). Finally, a muscovite-rich source with high ε_Nd(t) (about −8.9) gave origin to the younger group of granites (2.3–1.0 Ma). The significant Sr isotope disequilibrium recorded by granites belonging to the same intrusion is interpreted, as due to the short residence time of magmas in the source region followed by their rapid transfer to the emplacement level. Partial melting was probably triggered by multiple, small-sized mafic intrusions, distributed over the last 3.8 Ma that allowed temporary overstepping of biotite- and muscovite-dehydration melting reactions into an already pre-heated crust. Dilution in time of the magmatic activity probably prevented melt mingling and homogenization at depth, as well as the formation of a single, homogeneous, hybrid pluton at the emplacement level. Moreover the high concentrations of fluxing elements (B, F, Li) estimated for the LAR granites modified melt properties by reducing solidus temperatures, decreasing viscosity and increasing H₂O solubility in granite melts. The consequences were a more efficient, fast, magma extraction and transfer from the source, and a prolonged time of crystallization at the emplacement level. These key factors explain the long-lived hydrothermal activity recorded in this area by both fossil (Plio-Quaternary ore deposits) and active (Larderello geothermal field) systems.     

湖南宝山矿床花岗岩类硫-铅同位素和流体包裹体研究及其成因意义

宝山铜铅锌多金属矿床是湖南重要的铅锌生产基地。矿床内矽卡岩型铜(钼)矿化受侏罗纪花岗闪长斑岩的控制,而主要的铅锌矿体则产于远离岩体的碳酸盐地层中,且缺乏可靠的矿化年龄限制。为了查明宝山铅锌矿体与花岗闪长斑岩之间的成因关系,文章对宝山花岗岩类中浸染状黄铁矿的硫同位素和钾长石的铅同位素,以及铅锌矿石萤石脉石的流体包裹体进行了测试和研究,并与前人报道的铅锌硫化物矿石的硫、铅同位素进行了对比,尝试为宝山铅锌矿化的物质来源及成因提供依据。研究表明,花岗闪长斑岩中浸染状黄铁矿的δ34S值为+1.5‰~+3.5‰,与铅锌矿石硫化物(方铅矿、闪锌矿及黄铁矿)相一致;同时,花岗岩类中钾长石的铅同位素组成206Pb/204Pb、207Pb/204Pb和208Pb/204Pb分别为18.4789~18.7668、15.6835~15.7220和38.7903~39.1035,具有壳源的特征,且与铅锌矿石硫化物的铅同位素分布范围相吻合。宝山矿床的硫、铅同位素特征表明,花岗闪长斑岩应是铅锌矿化的主要硫源及金属来源。宝山矿床铅锌矿石萤石中的流体包裹体具有低温(130~150℃)、低盐度(8%)的特征,可能是岩浆热液演化到晚期的产物。结合已有的有关资料加以对比和分析,研究认为,宝山铅锌矿床的成矿物质应来源于花岗闪长岩的岩浆期后热液,在热液演化晚期迁移到远端地层中沉淀,形成了宝山的主要铅锌矿体。     

河南老湾金矿床上上河矿段矿床地质和成矿流体地球化学

河南桐柏老湾金矿床是桐柏-大别山(北坡)金银成矿带内大型造山带型金矿床之一。文章对该矿床的上上河矿段进行了矿床地质和成矿流体地球化学研究,旨在查明该矿段的流体成矿过程。根据矿脉穿插关系、矿石结构构造、矿物共生组合以及黄铁矿的粒度和晶形,将老湾金矿上上河矿段成矿过程划分为:石英粗粒自形黄铁矿(Ⅰ)、石英细粒半自形-他形黄铁矿(Ⅱ)、石英多金属硫化物(Ⅲ)及石英碳酸盐(Ⅳ)4个阶段。镜下观察显示,矿床中的包裹体类型有含CO_2包裹体(LH_2O+LCO_2+VCO_2)、纯CO_2包裹体(LCO_2+VCO_2)、液相包裹体(LH_2O+VH_2O)及少量含子晶包裹体(LH_2O+VH_2O+S)。第Ⅰ阶段、第Ⅱ阶段和第Ⅲ阶段均可见含CO_2包裹体、纯CO_2包裹体和液相包裹体,有时可见含CO_2包裹体与液相包裹体共存。流体包裹体显微测温结果表明,成矿流体可近似看做中温、低盐度、富CO_2的NaCl-H_2O-CO_2体系,纯CO_2包裹体和液相包裹体所代表的流体可能是由含CO_2包裹体所代表的Na Cl-H_2O-CO_2流体经不混溶形成的,三者在寄主矿物沉淀时,被同时捕获而共存。从第Ⅰ阶段到第Ⅳ阶段,成矿流体温度从303~379℃逐渐降低到138~195℃,盐度w(Na Cleq)从4.07%~9.59%逐渐降低到1.06%~2.74%。在成矿的第Ⅰ阶段成矿流体发生了不混溶作用,而在第Ⅱ阶段和第Ⅲ阶段流体中的CO_2起泡分离再次引发了不混溶作用。从第Ⅰ阶段到第Ⅲ阶段,成矿流体的δ18OH_2O从6.56‰~9.71‰经1.89‰~4.01‰变化到0.08‰,δDH_2O从-78.1‰~-64.2‰经-79.5‰~-76.3‰变化到-72.6‰,表明老湾金矿第Ⅰ阶段成矿流体主要为岩浆热液,第Ⅱ阶段成矿流体中有少量大气降水加入,第Ⅲ阶段成矿流体中大气降水的比例明显加大。     

浙江省绍兴市平水金矿体流体包裹体研究 与矿床成因

浙江平水铜矿位于钦杭成矿带北东段浙西北地区,是浙江省最大的铜矿床,前人研究表明其为典型的火山成因块状硫化物矿床（Chen 等, 2015）。平水铜矿体在新元古代形成之后,该地区经历了加里东的变质变形作用,在铜矿体的下盘普遍发育千糜岩带（韧性剪切带）,本项目组在研究过程中认为千糜岩带与铜矿无关,但明确提出本区可能存在造山型金矿,继而老矿山接替资源勘查在平水铜矿布置了10个坑内钻孔,其中9个见矿,成功的在平水深部发现两层金矿体和一层铜矿体。金矿体严格的受韧性剪切带的控制;金矿石有明显的宏观和微观韧性变形结构;矿石矿物主要是自然金和少量的黄铁矿,脉石矿物主要有石英、绢云母、绿泥石、碳酸盐和白云石。本文主要对平水金矿体开展流体包裹体研究,结合矿床地质特征,最终确定金矿体成因类型,为平水地区下一轮深边部找矿勘查提供依据。