初论陆内造山带的造山模式──以四川龙门山为例

四川龙门山造山带是陆内造山带的一个典型实例。陆内造山带经历了漫长的发展演化历史。前寒武纪时期的环境是属于古板块俯冲、碰撞的历史。具活动性大陆边缘性质，岩浆变质作用强烈，构造混杂明显。古生代以来转入地台环境，形成台相沉积。中生代早期转入陆内造山阶段。由早期的褶皱造山进而转化为推覆造山。两类不同性质的造山运动伴随了两类不同性质的前陆沉积盆地的形成和两类不同性质的沉积体系的形成。最终的区域构造特征不同程度地保留了陆内造山各阶段的地质记录，而以最后一次的推覆造山作用的影响最深刻。陆内造山的动力机制是与区域性的板块构造活动的大环境密切相关的。     

秦岭环斑花岗岩的年代学研究及其意义

本文对秦岭环斑花岗岩带进行了系统的测年工作,通过对实测Ｕ－Ｐｂ,Ｒｂ－Ｓｒ,＾４０Ａｒ／＾３９Ａｒ年龄测定结果研究,认为２１０－２１７Ｍａ是秦岭造山带主造山阶段结束的时间,为秦岭主造山期结束提供了确切的语气具有重要的科学意义。     

Luminescence chronology of the Sankosh river terraces in the Assam- Bhutan foothills of the Himalayas: Implications to climate and tectonics

Himalaya is an active fold and thrust belt formed due to continent-continent collision between the Eurasian and Indian plates. It comprises a 3000 km long chain of mountains that span ∼1000 km across, with major boundary thrusts viz., Main Central Thrust (MCT), Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). MFT is marked as mountain front and is the most active thrust; however, evidence of tectonic activity along MCT and MBT also exists.Tectonic activity along MFT created uplifted terraces which now serve as geomorphic archives of past tectonic events. The present study focussed on a glacial-fed river Sankosh that originates in northern Bhutan, and crosses MCT, MBT and MFT before joining the Brahmaputra River in Assam. Due to tectonic uplift, the river shows a deflection at MFT, incising and thus forming four levels of strath terraces. Luminescence chronology, geomorphic studies and analysis of satellite images suggest four levels of terraces T4 (highest level, 195 m asl), T3, T2 and T1 (lowest level, 120 m asl).The quartz was found insensitive for luminescence dating, and thus fading corrected Infra-Red Stimulated Luminescence (IRSL) ages on feldspar minerals were measured that provided ages of 143-77 ka (T4), 65-36 ka (T2) and 35-14 ka (T1), respectively. The T3 terrace was present only on the right bank of the river and could not be accessed. These ages accord with other studies at the Chalsa and Malbazar, North Bengal (west of the study area) and this regional disposition of similar ages suggest that these formed during glacial-interglacial periods. The strath terraces indicate a time-averaged tectonic uplift with a 0.5 mm/year rate over the past 150 ka.     

高喜马拉雅中段基性捕虏体的变质作用及其构造意义

西藏南部聂拉木—樟木剖面出露的高喜马拉雅变质带主要由副变质片麻岩和花岗质片麻岩组成,其次为伟晶岩和淡色花岗侵入体,区域变质程度为角闪岩相。我们对其中的变质基性捕虏体进行详细的变质作用研究,内容包括变质矿物组合,矿物变质反应结构和变质作用的温度—压力条件分析。基性捕虏体中的石榴子石角闪片麻岩和斜长角闪片麻岩均保存了两期变质矿物组合。温度与压力计算结果表明,石榴子石角闪片麻岩早期变质阶段(M1)温度约为829 ℃,压力为7.3 kbar; 晚期(M2)变质温度为625 ℃,压力为4.3 kbar。斜长角闪片麻岩所经历的早期变质阶段(M1)温度约为776 ℃、压力约为10.6 kbar; 晚期(M2)变质温度超过692 ℃,压力为7.4 kbar。石榴子石角闪片麻岩和斜长角闪片麻岩捕虏体均记录了典型的顺时针P-T轨迹,表明高喜马拉雅变质带曾向北俯冲到下地壳深度,之后被抬升到地表剥蚀出露。变质基性捕虏体的研究说明高喜马拉雅结晶岩系经历过较高温度—压力的变质作用,支持了其沿着藏南拆离系和主中央逆冲断裂系向南挤出的大地构造模型。     

花岗岩浆侵位与结晶固化时差的研究与构造意义:以南岭骑田岭花岗岩基为例

通过对南岭中段骑田岭花岗岩基地质-岩石地球化学特征研究, 判明了该岩基的侵位深度（5.5 km）、围岩温度（196℃）及岩浆初始温度（950 ℃ ）,建立起骑田岭花岗岩基的数学计算模型,计算得出： 骑田岭花岗岩熔体侵位后,其初始温度降低至结晶温度所需的时间（Δt col） 为4.1 Ma;由于结晶潜热释放而使结晶过程延长的时间（Δt L）为2.6 Ma; 由于骑田岭花岗岩基放射性元素含量 （U-15.3×10-6,Th-51.35×10-6,K2O-5.02%）是世界平均花岗岩放射性元素含量（U-5×10-6,Th-20×10-6,K2O-2.66%）的2~3 倍,骑田岭花岗岩浆侵位后产生的放射成因热使结晶过程延长的时间（Δt A） 为35.4 Ma,远长于世界平均花岗岩计算的Δt A（2.93 Ma） 。因此, 骑田岭花岗岩基的岩浆侵位- 结晶固化时差 （Δt ECTD）为42.1 Ma, 结合锆石U-Pb 年龄值（161 Ma）, 通过反演计算得出骑田岭花岗岩基侵位年龄值（t E ）为203.1 Ma,从而为骑田岭花岗岩基属于印支期侵位提供了重要的岩浆动力学佐证。     

胶东金矿成矿构造背景探讨

在编制1∶50万山东省大地构造相图基础上,通过对大地构造相研究显示：胶东微地块是经多期增生和碰撞而形成的,其漫长的板块构造演化明显具有阶段性。侏罗纪是该区板块构造演化史上的一个重要转换期,构造演化由原来的南、北分异转变为东、西分异,胶东地区NE向新生构造起了主要作用。胶东地区中生代有2次重要的碰撞造山事件,印支造山作用主要表现为扬子板块向华北板块俯冲,形成苏鲁高压-超高压变质带及同造山花岗岩及后造山高碱正长岩;燕山造山作用的大陆动力学环境起源于中亚-特提斯构造域向滨太平洋构造域转化和太平洋板块的俯冲,在胶东地区表现为3次造山和3次伸展。晚侏罗世造山早期玲珑片麻状花岗岩组合是区域构造挤压导致地壳增厚引起地壳重熔的产物,代表了大陆弧花岗岩特征;早白垩世造山中期郭家岭花岗闪长岩-花岗岩组合代表了造山期大陆弧花岗岩的特点;造山晚期伟德山闪长岩-花岗闪长岩-花岗岩组合表现为大陆弧花岗岩,后造山A型崂山晶洞过碱性碱长花岗岩-正长花岗岩组合为大陆造陆隆升花岗岩与后造山花岗岩,代表燕山构造的结束。胶东地区构造-岩浆事件和金矿成矿作用受控于特提斯、古亚洲洋和太平洋三大构造域的相互作用,金矿形成的动力学背景是中生代构造体制转折和岩石圈减薄,起因与太平洋板块向华北板块的俯冲机制有关。     

Paleomagnetic dating of Alleghanian orogenesis and mineralisation in the Mascot–Jefferson City zinc district of East Tennessee, USA

The Mascot–Jefferson City (M-JC) Mississippi Valley-type (MVT) deposits are in the Valley and Ridge province of the Appalachian orogen in East Tennessee. They have been a major source of zinc for the USA but their age is uncertain and thus their genesis controversial. About 10 specimens from each of 37 sites have been analysed paleomagnetically using alternating field and thermal step demagnetisation methods and saturation isothermal remanence methods. The sites sample limestones, dolostones, breccia clasts and sphalerite–dolomite MVT mineralisation from mines in the Lower Ordovician Kingsport and Mascot formations of the Knox Group. The characteristic remanent magnetisation (ChRM) is carried by magnetite in the limestones, by both magnetite and pyrrhotite in the dolostones and by pyrrhotite preferentially to magnetite in the mineralisation. Mineralized sites have a more intense ChRM than non-mineralised, indicating that the mineralising and magnetisation event are coeval. Paleomagnetic breccia tests on clasts at the three sites are negative, indicating that their ChRM is post-depositional remagnetisation, and a paleomagnetic fold test is negative, indicating that the ChRM is a remagnetisation, and a post-dates peak Alleghanian deformation. The unit mean ChRM direction for the: (a) limestones gives a paleopole at 129°E, 12°N (d_p=18°, d_m=26°, N=3), indicating diagenesis formed a secondary chemical remanent magnetisation during the Late Ordovician–Early Silurian; (b) dolomitic limestones and dolostone host rocks gives a paleopole at 125.3°E, 31.9°N (d_p=5.3°, d_m=9.4°, N=7), recording regional dolomitisation at 334±14 Ma (1σ); and (c) MVT mineralisation gives a paleopole at 128.7°E, 34.0°N (d_p=2.4°, d_m=4.4°, N=25), showing that it acquired its primary chemical remanence at 316±8 Ma (1σ). The mineralisation is interpreted to have formed from hydrothermal fluid flow, either gravity or tectonically driven, after peak Alleghanian deformation in eastern Tennessee with regional dolomitisation of the host rocks occurring as part of a continuum during the 20 Ma prior to and during peak deformation.     

燕山西部尚义盆地沉积岩区专题地质填图方法与成果

燕山运动是中国东部晚中生代重要的陆内造山运动,具有广泛而深远的地质影响。虽然前人对燕山运动的研究已近百年,积累了大量研究成果,然而目前对于燕山造山带的陆内造山过程仍存在很大争议。针对这一科学问题,选取燕山西部尚义盆地开展了1∶5万专题地质填图。在此基础上,通过盆地充填序列、岩相、沉积环境、物源的综合分析,恢复了盆地岩相古地理,建立了盆地演化模型,并探讨了燕山造山带陆内造山过程的沉积响应。根据沉积岩区岩相组合填图方法,绘制了1∶5万组-相级岩相分布图。燕山西部尚义盆地侏罗纪—早白垩世早期沉积演化记录了燕山造山带造山前伸展、同造山挤压和造山后伸展的全过程。     

西秦岭北带大草滩群的解体及其地质意义——兼论北秦岭加里东运动的性质

分布于西秦岭北带的上泥盆统大草滩群 (D3dc) ,被众多研究秦岭的地质学家认为是典型的造山后的磨拉石建造 ,并将这套地层作为北秦岭加里东运动最直接、重要的证据之一。我们的工作发现 ,大草滩群是由两套不同时代、不同沉积建造的地层体经逆冲—推覆构造作用形成的地层叠置系统。因此 ,原大草滩群予以解体 ,建议取消。这一认识对探讨北秦岭加里东运动的性质以及整个北秦岭构造演化历史提供了重要资料     

广西加里东运动构造古地理问题

广西历来被认为是我国加里东运动的典型地区,志留纪末的造山运动使早泥盆世莲花山组砾岩不整合于下伏地层之上。但是,实际上莲花山组只分布于广西中部的大明山－大瑶山地区和东北部扬子地块边缘,并且,它不具备同造山期磨拉石沉积特征,而是古陆剥蚀面上新海侵序列底部的滨海相沉积。广西西部的晚古生代台地相区,泥盆系底部为泥岩或粉砂岩,超覆于寒武系台地相沉积层之上。滇东南和越南北部邻区情况类似。推测在早古生代时它们属于一个地块,可称为“桂滇－北越地块”。早奥陶世云开地块和桂滇－北越地块、扬子地块的会聚和挤压,形成了大明山－大瑶山地体寒武系东西向的线形褶皱带。这是广西加里东运动的主幕。晚奥陶世-早志留世华夏地块和扬子地块的碰撞带在广西仅限于它的东北部,表现为震旦系-下志留统近南北向的线形褶皱带。志留纪末并无造山运动的证据。早泥盆世开始,可能由于地幔柱活动而使桂滇－北越地块裂解,形成北越地块、靖西台地和其他更小的块体。