辽宁花坤头营子旋卷构造中侵入岩特征与构造演化的关系

花坤头营子侵入岩是花坤头营子旋卷构造的重要组成部分,共分出4个侵入体,分别为早石炭世辉绿岩、早三叠世闪长岩、中侏罗世二长花岗岩、早白垩世花岗斑岩,最晚还有一期流纹斑岩脉侵入.岩浆来源除早石炭世辉绿岩来自上地幔,余下几个序次来源于下地壳,并熔融了部分陆壳物质.以被动就位机制为特征.     

特提斯喜马拉雅带东段列麦白云母花岗岩年代学及成因

列麦白云母花岗岩位于特提斯喜马拉雅东段,侵位于雅拉香波穹窿边部早古生代浅变质岩中。为揭示其形成时代及成因,本文对其开展LA-ICP-MS锆石U-Pb年代学、Hf同位素及岩石地球化学研究。结果表明列麦白云母花岗岩具有高SiO_2(71.08%～71.49%)、Al_2O_3(15.55%～15.72%)和K_2O(4.32%～4.57%),高的A/CNK比值(1.17～1.21),低的CaO/Na_2O比值(0.22～0.28),属于高钾钙碱性过铝质花岗岩;富集Rb、Th和Hf,亏损Ba、Nb、Sr和Ti,稀土元素呈轻稀土(LREE)富集,重稀土(HREE)相对亏损的向右倾斜的配分模式(LREE/HREE=16.57～17.91),具有弱负Eu异常(δEu=0.78～0.79)。与二云母花岗岩比较,列麦白云母花岗岩具有较高的Rb含量(204.1×10~(-6)～293.8×10~(-6))、较低的Sr(134.6×10~(-6))及显著的重稀土分馏效应。锆石新生边年龄为48.5±1.1 Ma(MSWD=2.1),代表其结晶年龄,该年龄为目前报道的最早年龄,其初始Hf同位素组成ε_(Hf)(t)=-6.4～-2.3,显示物源为壳源性质,二阶段模式年龄介于731～839 Ma之间,表明成岩物质形成于新元古代;核部继承锆石年龄变化在135.7～3339.2 Ma之间,表明其源岩为早白垩世沉积岩,是在印度与欧亚大陆主碰撞阶段,陆-陆碰撞导致地壳缩短加压升温,引起早白垩世沉积岩部分熔融而形成的。     

Geology,geochronology and fluid characteristics of the Pingqiu gold deposit,Southeastern Guizhou Province,China

The junction of the southeastern Guizhou, the southwestern Hunan, and the northern Guangxi regions is located within the southwestern Jiangnan orogen and forms a NE-trending ∼250 km gold belt containing more than 100 gold deposits and occurrences. The Pingqiu gold deposit is one of the numerous lode gold deposits in the southeastern Guizhou district. Gold mineralization is hosted in Neoproterozoic lower greenschist facies metamorphic rocks and controlled by fold-related structures. Vein types present at Pingqiu include bedding-parallel and discordant types, with saddle-reefs and their down limb extensions dominating but with lesser discordant types. The major sulfide minerals are arsenopyrite and pyrite, with minor sphalerite, galena, chalcopyrite, and rare pyrrhotite, marcasite, and tetrahedrite. Much of the gold is μm- to mm-sized grains, and occurs as fracture-controlled isolated grains or filaments in quartz, galena, sphalerite, pyrite, and wallrock.Three types of fluid inclusions are distinguished in hydrothermal minerals. Type 1 aqueous inclusions have homogenization temperatures of 171–396 °C and salinities of 1.4–9.8 wt% NaCl equiv. Type 2 aqueous-carbonic inclusions yield final homogenization temperatures of 187–350 °C, with salinities of 0.2–7.7 wt% NaCl equiv. Type 3 inclusions are carbonic inclusions with variable relative content of CO₂ and CH₄, and minor amounts of N₂ and H₂O. The close association of CO₂-rich inclusions and H₂O-rich inclusions in groups and along the same trail suggests the presence of fluid immiscibility. The calculated δ¹⁸O_H2O values range from 4.3‰ to 8.3‰ and δD_H2O values of fluid inclusions vary from −55.8‰ to −46.9‰. A metamorphic origin is preferred on the basis of geological background and analogies with other similar deposit types.Two ore-related sericite samples yield well-defined ⁴⁰Ar/³⁹Ar plateau ages of 425.7 ± 1.7 Ma and 425.2 ± 1.3 Ma, respectively. These data overlap the duration of the Caledonian gold mineralization along the Jiangnan orogen, and suggest that gold mineralization was post-peak regional metamorphism and occurred during the later stages of the Caledonian orogeny.Overall, the Pingqiu gold deposit displays many of the principal characteristics of the Bendigo gold mines in the western Lachlan Orogen (SE Australia) and the Dufferin gold deposit in the Meguma Terrane (Nova Scotia, Canada) but also some important differences, which may lead to the disparity in gold endowment. However, the structural make-up at deposit scale, and the shallow mining depth at present indicate that the Pingqiu gold deposit may have considerable gold potential at depth.     

Protracted thrusting followed by late rapid cooling of the Greater Himalayan Sequence,Annapurna Himalaya,Central Nepal: Insights from titanite petrochronology

The Greater Himalayan Sequence (GHS) has commonly been treated as a large coherently deforming high‐grade tectonic package, exhumed primarily by simultaneous thrust‐ and normal‐sense shearing on its bounding structures and erosion along its frontal exposure. A new paradigm, developed over the past decade, suggests that the GHS is not a single high‐grade lithotectonic unit, but consists of in‐sequence thrust sheets. In this study, we examine this concept in central Nepal by integrating temperature–time (T–t) paths, based on coupled Zr‐in‐titanite thermometry and U–Pb geochronology for upper GHS calcsilicates, with traditional thermobarometry, textural relationships and field mapping. Peak Zr‐in‐titanite temperatures are 760–850°C at 10–13 kbar, and U–Pb ages of titanite range from c. 30 to c. 15 Ma. Sector zoning of Zr and distribution of U–Pb ages within titanite suggest that diffusion rates of Zr and Pb are slower than experimentally determined rates, and these systems remain unaffected into the lower granulite facies. Two types of T–t paths occur across the Chame Shear Zone (CSZ). Between c. 25 and 17–16 Ma, hangingwall rocks cool at rates of 1–10°C/Ma, while footwall rocks heat at rates of 1–10°C/Ma. Over the same interval, temperatures increase structurally upwards through the hangingwall, but by 17–16 Ma temperatures converge. In contrast, temperatures decrease upwards in footwall rocks at all times. While the footwall is interpreted as an intact, structurally upright section, the thermometric inversion within the hangingwall suggests thrusting of hotter rocks over colder from c. 25 to c. 17–16 Ma. Retrograde hydration that is restricted to the hangingwall, and a lithological repetition of orthogneiss are consistent with thrust‐sense shear on the CSZ. The CSZ is structurally higher than previously identified intra‐GHS thrusts in central Nepal, and thrusting duration was 3–6 Ma longer than proposed for other intra‐GHS thrusts in this region. Cooling rates for both the hangingwall and footwall of the CSZ are comparable to or faster than rates for other intra‐GHS thrust sheets in Nepal. The overlap in high‐T titanite U–Pb ages and previously published muscovite ⁴⁰Ar/³⁹Ar cooling ages imply cooling rates for the hangingwall of ≥200°C/Ma after thrusting. Causes of rapid cooling include passive exhumation driven by a combination of duplexing in the Lesser Himalayan Sequence, and juxtaposition of cooler rocks on top of the GHS by the STDS. Normal‐sense displacement does not appear to affect T–t paths for rocks immediately below the STDS prior to 17–16 Ma.     

Mid to late Paleozoic shortening pulses in the Lachlan Orogen,southeastern Australia: a review

In the late Silurian, the Lachlan Orogen of southeastern Australia had a varied paleogeography with deep-marine, shallow-marine, subaerial environments and widespread igneous activity reflecting an extensional backarc setting. This changed to a compressional–extensional regime in the Devonian associated with episodic compressional events, including the Bindian, Tabberabberan and Kanimblan orogenies. The Early Devonian Bindian Orogeny was associated with SSE transport of the Wagga–Omeo Zone that was synchronous with thick sedimentation in the Cobar and Darling basins in central and western New South Wales. Shortening has been controlled by the margins of the Wagga–Omeo Zone with partitioning along strike-slip faults, such as along the Gilmore Fault, and inversion of pre-existing extensional basins including the Limestone Creek Graben and the Canbelego–Mineral Hill Volcanic Belt. Shortening was more widespread in the late Early Devonian to Middle Devonian Tabberabberan Orogeny, with major deformation in the Melbourne Zone, Cobar Basin and eastern Lachlan Orogen. In the eastern Melbourne Zone, structural trends have been controlled by the pre-existing structural grain in the adjacent Tabberabbera Zone. Elsewhere Tabberabberan deformation involved inversion of pre-existing rifts resulting in a variation in structural trends. In the Early Carboniferous, the Lachlan Orogen was in a compressional backarc setting west of the New England continental margin arc with Kanimblan deformation most evident in Upper Devonian units in the eastern Lachlan Orogen. Kanimblan structures include major thrusts and associated fault-propagation folds indicated by footwall synclines with a steeply dipping to overturned limb adjacent to the fault. Ongoing deformation and sedimentation have been documented in the Mt Howitt Province of eastern Victoria. Overall, structural trends reflect a combination of controls provided by reactivation of pre-existing contractional and extensional structures in dominantly E–W shortening operating intermittently from the earliest Devonian to Early Carboniferous.     

滇东南富宁地区基性侵入岩与峨眉山地幔柱存在成因关系吗?——来自1∶5万洞波幅和皈朝幅地质填图的证据

在滇东南富宁地区,出露一系列以辉绿岩为主、含少量辉长辉绿岩和辉绿玢岩的基性侵入岩。根据地球化学、同位素地球化学以及锆石U-Pb年代学等分析结果,前人将这些基性侵入岩视作峨眉山大火成岩省的组成部分,源自峨眉山地幔柱。国内外研究的共识认为,峨眉山地幔柱活动发生于263~252Ma之间,持续时间极短。在开展1∶2.5万大比例尺地质调查与填图(洞波幅和皈朝幅1∶5万地质调查手图)过程中,我们发现,这些基性侵入岩不仅侵入古生代地层,还侵入了富宁县皈朝一带的晚二叠世-中三叠世岛弧玄武安山岩(255~241Ma)以及早-中三叠世地层。这些地质事实表明,富宁地区基性侵入岩的形成时代至少晚于中三叠世Anisian期或更晚,与峨眉山地幔柱活动时代存在很大的时差,岩石类型与组合上也与峨眉山大火成岩省的有很大差异。根据我们填图过程中获得的基本地质事实分析,滇东南富宁地区的基性侵入岩是华南地块与北越地块间的古特提斯分支洋盆闭合、两个地块碰撞造山(即印支造山)后的岩浆活动产物,与峨眉山地幔柱没有成因关系。     

喜马拉雅造山带南北向裂谷的冷缩成因模型

长期以来,学者们普遍认为垂直于喜马拉雅造山带的南北向裂谷是东西向伸展的构造形迹。现代GPS观测数据却显示,喜马拉雅造山带东西位移(分)量很小,甚至为零。综合前人资料,喜马拉雅造山过程可划分为热造山(25~13Ma)及造山后(13Ma)冷却两个时期,热造山期具有受热膨胀,物质向外运移的特点,高喜马拉雅热隆挤出并触发各主要断裂(MCT、STD、GCT)活动,印度板块向北汇聚速率下降。造山后则表现为冷却收缩,前期构造-热活动停止或减弱,印度板块向北汇聚加速。研究认为,南北向裂谷与高喜马拉雅等冷却过程的东西向收缩。且被局限于东、西两个构造结之间有关。并据此建立了裂谷的冷缩成因模型,模型估值与地质事实很吻合。     

利用GPS观测资料分析2015年尼泊尔MS8.1地震震前及震后形变

通过对尼泊尔MS8.1地震前后附近区域GPS台站记录到的观测数据进行处理,获得了震区以及中国青藏高原地区地震前后GPS站点速度场以及震后形变场。震前速度场显示,喜马拉雅构造带整体呈现出约16 mm/a的压缩特征。同时,震前喜马拉雅构造带根据形变特征可分为东、中、西3段,其地震发生在中段,主要以北向挤压为主,而东西两段分别具有逆时针旋转和顺时针旋转的特征。震后GPS站点形变场显示,此次地震对中国新疆、青海、西藏等地区的影响较大,其最大震后位移达20 mm左右。震后速度场显示,本次地震对尼泊尔地区以及中国藏南地区的构造形变影响较大,主要表现为喜马拉雅构造带的年推挤速度减小,藏南地区的南北向运动速率减小,而东西向速度有增大的现象。这一现象可能对藏南地区的走滑断层有较大影响。     

Silicate‐oxide mineral chemistry of mafic–ultramafic rocks as an indicator of the roots of an island arc: The Chilas Complex,Kohistan (Pakistan)

The Chilas Complex is a major lower crustal component of the Cretaceous Kohistan island arc and one of the largest exposed slices of arc magma chamber in the world. Covering more than 8000 km², it reaches a current tectonic width of around 40 km. It was emplaced at 85 Ma during rifting of the arc soon after the collision of the arc with the Karakoram plate. Over 85% of the Complex comprises homogeneous, olivine‐free gabbronorite and subordinate orthopyroxene–quartz diorite association (MGNA), which contains bodies of up to 30 km² of ultramafic–mafic–anorthositic association (UMAA) rocks. Primary cumulate textures, igneous layering, and sedimentary structures are well preserved in layered parts of the UMAA in spite of pervasive granulite facies metamorphism. Mineral analyses show that the UMAA is characterized by more magnesian and more aluminous pyroxene and more calcic plagioclase than those in the MGNA. High modal abundances of orthopyroxene, magnetite and ilmenite (in MGNA), general Mg–Fe–Al spatial variations, and an MFA plot of whole‐rock analyses suggest a calc‐alkaline origin for the Complex. Projection of the pyroxene compositions on the Wo–En–Fs face is akin to those of pyroxenes from island arcs gabbros. The presence of highly calcic plagioclase and hornblende in UMAA is indicative of hydrous parental arc magma. The complex may be a product of two‐stage partial melting of a rising mantle diaper. The MGNA rocks represent the earlier phase melting, whereas the UMAA magma resulted from the melting of the same source depleted by the extraction of the earlier melt phase. Some of the massive peridotites in the UMAA may either be cumulates or represent metasomatized and remobilized upper mantle. The Chilas Complex shows similarities with many other (supra)subduction‐related mafic–ultramafic complexes worldwide.     

Recurrent mesoproterozoic continental magmatism in South-Central Norway

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.