IHS变换和小波变换相结合的遥感影像融合

本文针对低分辨率多光谱影像与高分辨率全色影像的融合，提出了一种IHS变换和小波变换相结合的遥感影像融合方法。方法首先对多光谱影像作IHS正变换，得到亮度I、色度H和饱和度S三个分量：然后利用小波变换融合方法，融合多光谱影像的亮度分量与全色影像，并用融合后的影像替代多光谱影像的亮度分量；最后，利用IHS反变换得到新的多光谱影像。试验结果分析表明，新方法的性能优于IHS变换融合方法、小波变换融合方法，在增强融合影像的空间细节表现能力的同时，很好地保留了多光谱影像的光谱信息。     

Flexural uplift of a lithospheric slab near the Vema transform (Central Atlantic): Timing and mechanisms

The Vema Transverse Ridge (VTR) is a prominent, long and narrow topographic anomaly that runs for over 300 km along a sea floor spreading flow line south of the Vema transform at 11° N in the Atlantic. It rises abruptly about 140 km from the axis of the Mid-Atlantic Ridge (MAR) in 10 Myr old crust and runs continuously up to 25 Myr old crust. It reaches over 3 km above the predicted lithospheric thermal contraction level. It is absent in crust younger than 10 Myr; thus, the uplift of the VTR must have ended roughly 10 Ma. The VTR is interpreted as the exposed edge of a flexured and uplifted slab of oceanic lithosphere that was generated at an 80 km long MAR segment. Based on satellite gravimetry imagery this MAR segment was born roughly 50 Ma and increased its length at an average rate of 1.6 mm/yr. Multibeam data show that the MAR-parallel sea floor fabric south of the VTR shifts its orientation by 5° to 10° clockwise in 11–12 Myr old crust, indicating a change at that time of the orientation of the MAR axis and of the position of the Euler rotation pole. This change caused extension normal to the transform, followed between 12 and 10 Ma by flexure of the edge of the lithospheric slab, uplift of the VTR at a rate of 2 to 4 mm/yr, and exposure of a lithospheric section (Vema Lithospheric Section or VLS) at the northern edge of the slab, parallel to the Vema transform. Ages of pelagic carbonates encrusting ultramafic rocks sampled at the base of the VLS at different distances from the MAR axis suggest that the entire VTR rose vertically as a single block within the active transform offset. A 50 km long portion of the crest of the VTR rose above sea level, subsided, was truncated at sea level and covered by a carbonate platform. Subaerial and submarine erosion has gradually removed material from the top of the VTR and has modified its slopes. Spreading half rate of the crust south of the transform decreased from 17.2 mm/yr between 26 and 19 Ma to 16.9 mm/yr between 19 and 10 Ma, to 13.6 mm/yr from 10 Ma to present. The slowing down of spreading occurred close in time to the change in ridge/transform geometry, suggesting that the two events are related. A numerical model relates lithospheric flexure to extension normal to the transform, suggesting that the extent of the uplift depends on the thickness of the brittle layer, consistent with the observed greater uplift of the older lithosphere along the VTR.     

Causes and solutions of overshoot and undershoot and end swing in Hilbert-Huang transform

Introduction Hilbert-Huang transform (HHT) is a great break in processing nonlinear and non-stationary data and can be successfully used in many science domains. There are mainly two parts in this method. The first part is to decompose the original data into several intrinsic mode functions (IMF) with the empirical mode decomposition (EMD). IMF components are derived from the original data directly according to the local characteristics in the data under some rules, so that IMF are poste…     

Analyses on normal background characteristics about deformation observation data on the basis of wavelet transform method

Introduction Fourier transform that summed up a series discomposed sin functions of signal has been one of the widely used methods in the field of signal process all along. While for time information be-ing thrown away by this transform, it is difficult for us to judge when a special signal occurs on the way. Though short time Fourier transform (STFT) was developed later, which can probe local features of signals, it can not reveal what is really there because uniform window functions de-fin…     

图像增强技术在重磁图像中的应用

本文综述了图像增强技术在位场数据中的应用现状，并介绍了两种改进的图像增强技术，用于增强重磁图像特征。一种方法借鉴了直方图平滑化的思想，应用于位场彩色影像的色谱的自动确定。该方法的应用能够使色彩合理地配置，从而保证了图像的视觉效果和分辨率。另一种方法基于改进的Radon变化和梯度计算，用于重磁图像中线性特征的检测和增强。该方法能在变化域中突出显示线性特征，从而有利于线性特征的检测和增强。通过对简单图像和实际资料的应用，表明了两种方法在增强特征中的有效性。     

基于小波多尺度分析的奇性指数：一种新地震属性

传统的地震解释主要是观测地震振幅及相位的变化，但是地震振幅也会掩盖地下介质中真实的地质情况.在许多情况下，重要的地质信息可能是通过与振幅特征无关的奇异性参数来传递的.本文提出奇异性指数，即Hlder指数α（又被称为Lipschitz指数），可以作为一种新的地震属性，它能够准确反映数据中的奇点的位置和奇异性强度.Hlder指数α是对某一点上或某一点周围很小的范围内的奇异性强度的度量，大的α值表示低的奇异性（或高的正则性）.研究表明α可以作为一种自然的能够精确刻画地层边界的地震属性.本文根据这一思想，对合成和实测的地震数据进行了小波基础上的多尺度分析研究，结果表明由本文的算法得到的α提高了对地层边界划分的能力，而这些地层界面在传统的地震振幅显示则不明显.     

KL变换消除探地雷达数据中的水平相干噪声

由于探地雷达采用共偏移距剖面的工作方式,造成数据记录中存在大量水平相干噪声。探讨了采用KL变换消除这些水平相干噪声的方法,并给出了具体的实现步骤。最后通过模型试验和实际数据验证了该方法的有效性。     

激流环境下水上地震反射法及效果

介绍了西气东输工程在河道穿越勘察工作中水上地震反射法的方法与技术,并讨论了在激流环境下,水上反射法的工作条件及需要注意的问题,提出了适应激流环境下的地震数据采集、处理、解释工作方法。该方法克服了激流及其噪声的影响,达到了良好的勘探效果。     

关于瞬变电磁法2.5维正演中的几个问题

这里讨论了瞬变电磁法2.5维正演模拟中的两个积分变换:傅里叶逆变换和拉普拉斯逆变换。针对发收距为零的中心回线方式瞬变电磁法,提出了在傅氏域中考察傅氏变换函数随波数的变化规律,进而根据曲线首尾支渐近线来划定波数覆盖的范围,然后同解析解对比,确定出最少个数的傅氏域波数。另外,介绍了只需对较少的拉氏变换变量作纯实数运算的拉普拉斯数值反演计算方法。通过对均匀半空间表面上垂直磁偶极子源形成的瞬变电磁场进行正演模拟,结果表明,关于傅氏域波数的范围划定原则及个数选取方案是合理的、拉氏逆变换算法也是切实可行的。     

坐标转换参数的求解方法及其应用

根据坐标转换参数的解算模型,介绍几种常见的坐标转换参数的求解方法及其参数个数与精度;探讨选择坐标转换参数的条件及转换参数的应用,从而阐明转换参数对GPS技术的推广和全球资料的统一的重要作用。