顶管矩形工作井复合式后背墙反力分布研究

顶管工作井在顶进施工过程中受力复杂,主要表现在：确定千斤顶推力在内部结构、围护结构和后背墙外侧土体之间的作用力是如何传递,土体变形对墙背土体抗力发挥的影响以及其对结构内力计算分析的影响。对现有顶管工作井计算方法进行归纳基础上,通过对工程算例建立数值计算模型,求证了后背墙各部分反力在宽度和深度方向上的分布规律,为探求一种合理简化更加接近实际的顶管复合式后背墙结构计算方法提供参照。     

新庄黏土加筋挡墙失稳破坏研究

到目前为止,加筋土挡墙采用的填土大多是砂性土,在这种情况下取得的结果与实测结果较相吻合,但当填土为黄土、中低液限黏土及高液限黏土时,加筋土挡墙失败的例子较多,还有待于进一步的研究。通过对黏土与聚丙烯土工带在不同含水率下进行了不同法向荷载作用的直剪试验,讨论了法向应力、含水率对高液限黏土与筋带之间剪切特性的影响。基于试验结果,对312国道宁镇公路某桥头引道黏性土加筋挡墙的设计及工后状况进行了数值模拟,分析了柔性加筋材料的加筋土挡墙破裂面分布形状,并与规范进行对比。分析了了该加筋挡墙失稳破坏的原因,并对黏土作为加筋土挡墙填土材料时,提出相关的改善措施与建议,对今后类似挡墙的修建具有一定的指导和参考意义。     

孤立波对礁坪上直墙冲击试验和RANS数值模拟

在有、无礁冠两种典型岛礁剖面地形上开展孤立波冲击礁坪上直墙的二维水槽试验和数值模拟研究。通过OpenFOAM结合k-ε湍流模型进行RANS数值模拟,基于试验数据和验证后的RANS模拟结果,研究了岛礁剖面上孤立波传播的水动力特性及其对直墙的作用,并探讨了礁冠的存在对直墙所受冲击的影响。结果表明:RANS(k-ε)模型能够准确还原孤立波在岛礁地形上的主要传播特征,但在波浪破碎的情况下,RANS数值模拟不够精细,尤其对直墙所受瞬击荷载的捕捉能力欠缺;礁冠的存在,增强了波浪反射,使得波浪提前破碎,减小了直墙上的波浪爬升和最大动压。     

Seismic behaviour of steel plate shear wall systems with staggered web configurations

Unstiffened steel plate shear walls (SPSWs) are used as lateral load‐resisting systems in building structures. The energy dissipation mechanism of SPSWs consists of the tension yielding of web plates and the formation of plastic hinges at the ends of horizontal boundary elements. However, vertical boundary elements (VBEs) of high‐rise SPSWs may experience high axial forces under lateral loading. This study explores the effectiveness of staggering of web plates on the reduction of VBE forces and drift response of SPSWs during an earthquake event. An analytical study has been conducted to determine the base shear reduction factor so as to match the overstrength of staggered systems with conventional SPSWs. A design methodology has been proposed for staggered SPSWs. Six‐, 9‐, and 20‐storey staggered and conventional SPSWs with varying aspect ratios are considered in this study to compare their seismic response. These study frames are modelled and analysed in OpenSEES platform. Nonlinear static and dynamic analyses are performed to compare the drift response, hinge mechanisms, and steel tonnage. Staggered SPSWs showed uniform drift distribution and reduction in interstorey drift and axial force demand on the VBEs.     

动载下无筋砌体墙的应力场及裂隙分布

为探索动载下建筑物墙体失稳的力学机制,基于弹性力学理论,分析一端刚性固定无筋砌体墙受垂直地震波扰动时的应力场分布规律,得到墙体的应力解析表达式,结果显示应力特征由墙体质点振速、墙体恒载、墙体密度及其几何尺寸等因素共同决定。结合具体算例发现:墙体水平应力、垂直应力与剪应力具有不同的分布特征。水平应力值分别是剪切和垂直应力值的5倍和25倍,为墙体应力场的主控应力,其应力集中区位于刚性固定侧墙体的顶、底角,应力变化梯度为180MPa/m,且随地震强度增加,其应力场进一步向墙体刚性固定侧集中。在此基础上,基于主应力主导墙体裂隙的原则,预测了墙体张开型裂隙的分布位置、长度及角度,获得了墙体最易出现破坏失稳的部位。通过模型计算可为掌握动载下墙体力学行为提供参考。     

Empirical‐based out‐of‐plane URM infill wall model accounting for the interaction with in‐plane demand

The role of masonry infills in the seismic behavior of reinforced concrete buildings has been widely studied in terms of their strength and stiffness contribution in the in‐plane (IP) direction, while fewer studies have been carried out on their response and modeling in the out‐of‐plane (OOP) direction. In this paper, the state of the art in code and literature provisions regarding infills' OOP capacity and seismic demand is presented, together with a review of the experimental tests that have been carried out to investigate infills' OOP behavior and the effects of IP‐OOP interaction. This review aims to collect an experimental database that is used to evaluate the effectiveness of literature and code provisions and to propose a semiempirical approach both for predicting infills' OOP strength, stiffness, and displacement capacity and for modeling the effects of IP displacement demand on OOP behavior and vice versa. Then, the state of the art on modeling of infills' OOP behavior and IP‐OOP interaction is presented together with a new macro model based on the proposed formulations and conceived to represent the IP and OOP behavior by taking into account the mutual interaction effects. Finally, the proposed model is used for an example application on two case‐study buildings, showing the effects of taking into account or neglecting the IP‐OOP interaction phenomena.     

Linear‐elastic lateral load analysis and seismic design of pin‐supported wall‐frame structures with yielding dampers

This paper describes an analytical investigation on a reinforced concrete lateral load resisting structural system comprising a pin‐supported (base‐rocking) shear wall coupled with a moment frame on 1 or both sides of the wall. Yielding dampers are used to provide supplemental energy dissipation through the relative displacements at the vertical connections between the wall and the frames. The study extends a previous linear‐elastic model for pin‐supported wall‐frame structures by including the effects of the dampers. A closed‐form solution of the lateral load behavior of the structure is derived by approximating the discrete wall‐frame‐damper interactions with distributed (ie, continuous) properties. The validity of the model is verified by comparing the closed‐form results with computational models using OpenSees program. Then, a parametric analysis is conducted to investigate the effects of the wall, frame, and damper stiffness on the behavior of the structure. It is found that the damper stiffness significantly affects the distribution of shear forces and bending moments over the wall height. Finally, the performance‐based plastic design approach extended to the wall‐frame‐damper system is proposed. Case studies are carried out to design 2 damped pin‐supported wall‐frame structures using the proposed approach. Nonlinear dynamic time‐history analyses are conducted to verify the effectiveness of this method. Results indicate that the designed structures can achieve the performance level with the story drift ratios less than target values, and weak‐story failure mechanism is not observed. The approach can be used in engineering applications.     

中国与新西兰规范中混凝土结构弹性位移角限值及有关影响因素分析

按照中国规范与新西兰规范建立钢筋混凝土框架模型,比较两国规范在正常使用极限状态下弹性位移角限值的宽严程度。就中国规范算例,按照新西兰规范逐个改变设计地震作用、构件有效刚度、隔墙影响和偶然偏心率等因素,分析各因素对结构弹性位移角的影响程度,从而对比两国规范的弹性设计地震作用水平差异。     

带有可更换连梁的钢筋混凝土结构设计方法

钢筋混凝土剪力墙结构通过设置可更换连梁,在地震作用下集中损伤,保护主体结构不受或只受微小破坏,震后更换损伤构件即可恢复结构功能。参照现行规范和已有试验分析结果,在普通钢筋混凝土结构设计基础上,提出带有可更换连梁的钢筋混凝土结构实用设计方法,设定性能目标,总结设计流程。采用提出的设计方法对1个50层钢筋混凝土结构进行设计,并采用大型有限元分析软件ABAQUS建立数值模型,验证结构性能目标和提出的设计方法。结果表明:按该方法设计的带有可更换连梁的钢筋混凝土结构能满足所设定的性能目标,设计方法合理实用,为该新型结构的工程应用提供了参考。     

阻尼填充墙优化布置对不规则框架结构抗震性能的影响

在不规则结构中,填充墙的表现对框架结构的局部以及整体抗震性能的表现显得非常重要。随着阻尼填充墙的深入研究,大大提高了框架填充墙结构的抗震性能。但由于阻尼填充墙施工工艺复杂、施工成本较高,很难得以大规模使用。为了实现既降低施工的难度和成本又提高框架结构的抗震性能,本文选取一座不规则框架结构对其地震表现进行分析。采用局部优化布置阻尼填充墙的方法,达到既提高结构抗震性能又降低施工难度和成本的要求,为框架填充墙结构的设计提供一定的建议。