GPS卫星运动状态算法及其软件实现

确定卫星的位置和速度是GPS定位导航的基础,以二体问题为基础,介绍了卫星运动状态的计算方法,建立了计算卫星实时位置、速度的数学模型,并运用C 语言实现了算法,证实了算法的正确性。     

Modification Of The Standard ∈-Equation For The Stable Abl Through Enforced Consistency With Monin–Obukhov Similarity Theory

A condition is derived for consistency of the standard-equation with Monin–Obukhov (MO) similarity theory of thestably-stratified surface layer. The condition is derivedby extending the procedure used to derive the analogous condition forneutral theory to stable stratification. It is shown that consistencywith MO theory requires a function of flux Richardson number, Ri_f, to be absorbed into either of two closure parameters, c ₁ or c ₂.Inconsistency, on the other hand, results if constant values of these are maintained for all Ri_f, as is done in standardapplication of the equation, and the large overpredictions ofturbulence found in such application to the one-dimensionalstable atmospheric boundary layer (1D-SBL) are traced to thisinconsistency. Guided by this, we formulate a MO-consistent-equation by absorbing the aforementioned function intoc ₁, and combine this with a Level-2.5 second-orderclosure model for vertical eddy viscosity and diffusivities.Numerical predictions of the 1D-SBL by the modified model converge to a quasi-steady state, rectifying the predictive failure of the standard -equation for the case.Quasi-steady predictions of non-dimensional variables agree stronglywith Nieuwstadt's theory. Qualitative accuracy of predictionsis inferred from comparisons to field data, large-eddy simulationresults and Rossby-number similarity relationships.     

Vertical Structure in the Marine Atmospheric Boundary Layer and its Implication for the Inertial Dissipation Method

The structure of the marine atmospheric boundarylayer and the validity ofMonin–Obukhov similarity theory over the seahave been investigated using longterm measurements. Three levels of turbulencemeasurements (at 10 m, 18 mand 26 m) at Östergarnsholm in themiddle of the Baltic Sea have beenanalysed. The results show that turbulentparameters have a strong dependenceon the actual height due to wave influence.The wind profile and thus thenormalised wind gradient are very sensitiveto wave state. The lower part of theboundary layer can be divided into three heightlayers, a wave influenced layerclose to the surface, a transition layer andan undisturbed ordinary surfacelayer; the depth of the layers is determinedby the wave state. This heightstructure can, however, not be found for thenormalised dissipation, which is onlya function of the stability, except duringpronounced swell where the actualheight also has to be accounted for. Theresults have implications for the heightvariation of the turbulent kinetic energy(TKE) budget. Thus, the imbalancebetween production and dissipation willalso vary with height according to thevariation of wave state. This, in turn,will of course have strong implicationsfor the inertial dissipation method, inwhich a parameterisation of the TKEbudget is used.     

土层结构对反应谱特征周期的影响

本文选取和构造了若干有工程意义的典型场地剖面,利用目前工程上广泛应用的场地地震反应分析的一维等效线性化波动方法,计算了在不同地震动输入下的不同场地剖面的地表加速度峰值和地表速度峰值。利用计算得到的地表加速度峰值和速度峰值计算了不同场地在不同地震动输入下的反应谱的特征周期。研究了不同土层结构对地表加速度反应谱特征周期的影响,获得了一些有意义的结果。     

Analyses of trace elements on quartz surfaces in sulfidic mine tailings from Kristineberg (Sweden) a few years after remediation

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been applied to determine the elemental composition of the surface layer, as well as of the first interior layer, of quartz grains from the mine tailings from Kristineberg (northern Sweden) in order to determine concentration gradients between these two layers. The quartz grains were collected from the oxidized and unoxidized zones within the tailings. The aim of this study is to assess the role of quartz surfaces as sites for the attenuation of solutes from the mine-tailings porewater. Concentrations of Cu, Ag, Sb, Pb and Bi are highest near the surface of each grain and decrease towards the interior. The surface concentration of Cu, Zn and Pb is more pronounced within the unoxidized than within the oxidized zone of the tailings. Cu exhibits a distinct concentration peak at the surface of the quartz grains below the pre-remediation oxidation front. For Zn and Ce the trend of high surface concentration is less pronounced than for Cu or Pb. Silver, Bi and As are preferably adsorbed within the uppermost layers of the oxidized zone where the pH is as high as 6.2. The conversion of intensity signals of the elements to concentration values in ppm was done by using external standards (NIST silicate glass).     

Synthetic Experiments Dealing with Anisotropic Model Building

It has been shown in the past that the interval-NMO velocity and the non-ellipticity parameter largely control the P-wave reflection time moveout of VTI media. To invert for these two parameters, one needs either reasonably large offsets, or some structure in the subsurface in combination with relatively mild lateral velocity variation.This paper deals with a simulation of an inversion approach, building on the assumption that accurately measured V _NMO, as defined by small offset asymptotics for a particular reflector, were available. Instead of such measurements we take synthetically computed data. First, an isotropic model is constructed which explains these V _NMO. Subsequently, residual moveout in common image gathers is modelled by ray tracing (replacing real data), along with its sensitivity for changes in the interval-NMO velocity and the non-ellipticity parameter under the constraint that V _NMO is preserved. This enables iterative updating of the non-ellipticity parameter and the interval-NMO velocity in a layer that can be laterally inhomogeneous.This approach is successfully applied for a mildly dipping reflector at the bottom of a layer with laterally varying medium parameters. With the exact V _NMO assumed to be given, lateral inhomogeneity and anisotropy can be distinguished for such a situation. However, for another example with a homogeneous VTI layer overlying a curved reflector with dip up to 30°, there appears to be an ambiguity which can be understood by theoretical analysis. Consistently with existing theory using the NMO-ellipse, the presented approach is successfully applied to the latter example if V _NMO in the strike direction is combined with residual moveout in dip direction.     

海南岛抱板群岩石高温高压实验及金成矿机理探讨

高温高压实验岩石学是地质学、岩石学领域中的“硬科学”犤1999,王德滋,等犦。目前高温高压实验岩石学研究主要是针对单一岩石的熔化和融离实验,而针对多物源成因的花岗岩模拟其物源贡献大小的实验岩石学及同时发生的成矿作用研究基本上是一个空白。文章根据海南岛戈枕含金剪切带中元古代花岗岩的物源特征及与之有关的戈枕式金矿成因特点,通过高温高压实验岩石学模拟,初步探讨古中元古代抱板群岩石高温高压下的熔融行为及金的成矿机理。实验结果表明,具原地-半原地性质的中元古代花岗岩很可能是由6份(或4份)石英绢云母片岩+1份斜长角闪片麻岩、在压力为1.879～2.143GPa、温度849～901℃的条件下部分熔融形成的,部分熔融过程同时还发生了金的聚集和活化迁移。     

高应力区破裂岩体回采巷道一次强化支护技术及其应用研究

基于对高应力区破裂岩体回采巷道支护 10多年的经验和教训 ,本文首次提出了相对于主次承载区协调作用关系的关键支护技术 ,即一次强化支护技术。该支护技术不仅强调了对于高应力区破裂岩巷道支护时间的及时性 ,支护强度一次到位 ,更重要的是区别于先让后抗、二次支护的指导思想 ;同时 ,一次强化支护技术还详细明确了支护类型、支护结构以及施工工艺。该支护技术在小官庄铁矿高应力区的应用成功 ,表明该支护关键技术是正确的。     

人工多晶橄榄石样品孔隙压缩高温高压实验研究

人工制备多晶橄榄石样品的高孔隙度是实验关注的问题之一。本文着重研究在给定温度条件下人工多晶橄榄石样品高温高压孔隙压缩问题。文中给出了含水的湿样品和干燥样品孔隙度与实验压力的关系曲线,并提出了衡量样品压实程度的压实系数Ｖｏ／Ｖ的概念。     

不同温压下岩石弹性波速度、衰减及各向异性与组构的关系

结合岩石组构分析 ,阐述了岩石弹性波传播速度和衰减以及它们的各向异性与岩石组构之间的关系。在不同温压条件下对具有很强晶格优选方位的岩石样品的研究表明 ,随着围压的增加 ,波速和Q值均增大 ,但是在相互正交的 3个方向上 (垂直或平行于层理面及线理方向 )增大的速度并不相同 ,这与微裂隙的逐渐闭合密切相关。观测到的波速和Q值的各向异性具有不同的形成机理 ,波速各向异性主要与定向分布的微裂隙和主要矿物的晶格优选方位等构造因素有关 ;高围压下Q值各向异性与速度各向异性正好相反 ,可能是由于定向排列的矿物晶体沿不同方向其边界之间接触程度不同造成的。对岩石组构的研究不仅可以揭示岩体的变形机制、变形的动力学过程及其有关的热力学信息 ,还可以对宏观岩石的各种物理性质 ,尤其是力学特性 ,从微观机理上加以解释。文中特别强调了岩石组构分析对研究岩石物理性质的各向异性具有十分重要的意义。