基于MODIS积雪产品的高亚洲融雪末期雪线高度遥感监测

以2001—2016年逐日MODIS积雪产品为主要数据源,在高亚洲区域发展了大尺度融雪末期雪线高度的遥感提取方法,并对其2001—2016年的时空变化特征进行了分析。提取方法首先对逐日的MODIS积雪覆盖率产品进行去云处理,获得积雪覆盖日数（SCD）数据集;并用冰川年物质平衡观测数据、融雪末期Landsat数据对提取终年积雪的MODIS SCD阈值进行率定;最后以MODIS SCD提取的终年积雪面积结合地形“面积—高程”曲线实现大尺度融雪末期雪线高度信息的提取。结果表明：① 高亚洲融雪末期雪线高度的空间异质性较强,总体上呈南高北低的纬度地带性分布规律;并因受山体效应的影响,雪线高度由高海拔地区向四周呈环形逐渐降低的特点。② 高亚洲2001—2016年融雪末期雪线高度总体上表现为明显的增加趋势。在744个30 km的监测格网中,24.2%的格网雪线高度呈显著增加,而仅0.9%的格网呈显著下降。除兴都库什、西喜马拉雅外,其他地区雪线高度均表现为升高趋势,显著上升的地区主要分布在天山、喜马拉雅中东部和念青唐古拉山等,其中以东喜马拉雅升高最为显著（8.52 m yr ^-1）。③ 夏季气温是影响高亚洲融雪末期雪线高度变化的主要因素,两者具有显著的正相关关系（R = 0.64,P < 0.01）。     

Intrusion and its implication for subsidence: A case from the Baiyun Sag, on the northern margin of the South China Sea

We develop a series of simple numerical models to explain the anomalous subsidence and deposition phenomena on the northern continental margin of the South China Sea, in particular in the Baiyun Sag. The results suggest that a short-period high rate deposition of around 17 Ma is related to a rapid subsidence event, which may be due to episodic emplacement of a dense intrusion. Necking and gravity models indicate that in the basement of the Baiyun Sag, there is a dense zone that is 100–200 kg/m³ more dense than the surrounding country rock. Considering its high magnetic intensity and regional igneous activity, the dense zone is thought to be related to a phase of basalt intrusion that may have taken place around 17 Ma. Thermal and subsidence models indicate that a hot denser intrusion can cause significant subsidence immediately after the intrusion. The subsidence rate then slows down with cooling, thus becoming consistent with the observed subsidence curves at around 17 Ma. The results also indicate that the lithospheric strength under the Baiyun Sag is negligible, and that the high-velocity layer in the lowermost crust may be not an original part of the pre-rift crust. Instead, it is thought to be underplated intrusion emplaced at around 30 Ma when the continental margin broke up.     

Thermal analysis in the laser-heated diamond anvil cell

A new technique actively controls thermal radiation and monitors sample properties during laser-heating in a diamond anvil cell. The technique can be described as a qualitative application of thermal analysis. Discontinuities in temperature, laser power, visible thermal radiation, or in their derivatives as functions of time can be associated with the enthalpy of phase transitions (such as melting) or with changes in maternal properties (such as emissivity).The technique is illustrated with melting experiments on iron-magnesium-silicate perovskite. Temperature corrections associated with these experiments are discussed and the results are briefly reviewed.     

文山—辰山公路岩质高边坡稳定性评价

文山—辰山公路位于福建连江可门港区,环罗源湾,其中K5+000~K5+140段沿线穿越工程地质条件复杂的岩质高边坡。该边坡岩体发育有2组优势结构面,边坡受到该2组优势结构面的共同作用,需评价其稳定性。运用赤平极射投影方法,分析判定了斜坡自然状态的稳定性,并进一步分析得到拟开挖路堑边坡的合理放坡坡率。现经施工实践证明,效果良好。     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Paleoproterozoic juvenile magmatism within the northeastern sector of the São Francisco paleocontinent: Insights from the shoshonitic high Ba–Sr Montezuma granitoids

New,integrated petrographic,mineral chemistry,whole rock geochemical,zircon and titanite UPb geochronology,and zircon Hf isotopic data from the Montezuma granitoids,as well as new geochemical results for its host rocks represented by the Corrego Tingui Complex,provides new insights into the late-to post-collisional evolution of the northeastern Sao Francisco paleocontinent.U-Pb zircon dates from the Montezuma granitoids spread along the Concordia between ca.2.2 Ga to 1.8 Ga and comprise distinct groups.Group I have crystallization ages between ca.2.15 Ga and 2.05 Ga and are interpreted as inherited grains.Group II zircon dates vary from 2.04 Ga to1.9 Ga and corresponds to the crystallization of the Montezuma granitoids,which were constrained at ca.2.03 Ga by the titanite U-Pb age.Inverse age zoning is common within the ca.1.8 Ga Group III zircon ages,being related to fluid isotopic re-setting during the Espinhaco rifiting event.Zircon ε_(Hf)(t) analysis show dominantly positive values for both Group I(-4 to+9) and Ⅱ(-3 to+8) zircons and T_(DM2) model ages of 2.7-2.1 Ga and 2.5-1.95 Ga,respectively.Geochemically,the Montezuma granitoids are weakly peraluminous to metaluminous magnesian granitoids,enriched in LILES and LREE,with high to moderate Mg#and depleted in some of the HFSE.Their lithochemical signature,added to the juvenile signature of both inherited and crystallized zircons,allowed its classification as a shoshonitic high Ba-Sr granitoid related to a late-to post-collisional lithosphere delamination followed by asthenospheric upwelling.In this scenario,the partial melting of the lithospheric mantle interacted with the roots of an accreted juvenile intra-oceanic arc,being these hybrid magma interpreted as the source of the Montezuma granitoids.The Corrego Tingui Complex host rocks are akin to a syn-to late-collisional volcanic arc granitoids originated from the partial melting of ancient crustal rocks.The results presented in this study have revealed the occurrence of juvenile rocks,probably related to an island arc environment,that are exotic in relation to the Paleo-to Neoarchean crust from the Sao Francisco paleocontinent's core.     

苏鲁超高压变质带的深部构造特征——宽频地震层析结果

为了探测苏鲁超高压变质带的岩石圈结构实施了山东日照到滨洲剖面的宽频带地震探测,于2003～2005年使用REFTER130-01型和CMG-6TD型三分量地震仪(频宽50～60s).以10～25km间距布设了25个台站观测近三年时间.由远震地震层析反演结果得到了华北板块、超高压变质带、扬子板块清晰的P波速度图像.华北板块具有简单的低速体形态,越过郯庐断裂向超高压变质带扩张,并平稳地由郯庐断裂向北延伸直到黄河以北的古城镇.Moho面和岩石圈深度分别为30～35km,75～80km;扬子板块为高速体,界于两者之间的苏鲁超高压变质带地壳的平均速度大于两侧板块,剖面上从日照到五莲-烟台断裂范围内除地壳为高速体外,30～60km深度范围内有一个高速体和一个低速体拼会在一起,构成了超高压变质带岩石圈最突出的构造特征.此高速体应为榴辉橄榄岩等超基性岩组成,它可能属于折返回来又被移动的超高压变质岩组合体,并与华北板块基底直接接触,超高压变质带的下界面深度为60km.下界面平直,可能意味着正在消退的造山带的山根,或是造山带的下一层Moho面?郯庐断裂带地壳出露的共四条带,比较陡的产状向深部延伸,并逐步向南倾,TLF2～TLF4在岩石圈底界处合并.     

运用概率分布函数确定特高品位

地质品位是评价矿石质量的重要依据。样品的品位与频率的曲线为不对称的正态曲线时,通过对样品品位的数率统计,用正态分布积分函数计算某测定品位以上的样品在样本总体内允许出现的数量,确定其是否为特高品位。     

The magmatic–hydrothermal transition—evidence from quartz phenocryst textures and endoskarn abundance in Cu–Zn skarns at the Empire Mine, Idaho, USA

Information about the magmatic to hydrothermal transition is preserved in late-stage features of quartz phenocrysts and endoskarn alteration in some Cu–Zn skarn deposits such as the Empire Mine in Idaho. Important features include: (1) quartz phenocrysts with strong resorption textures such as vermicular zones of igneous groundmass cutting primary quartz cathodoluminescence banding, (2) anomalous amounts of endoskarn (more than 50% of mineralized rock), (3) high F activities as evidenced by fluorite as an accessory mineral in igneous rocks, in alteration assemblages, and in fluid inclusions and by high F in hydroxyl sites in igneous biotite and amphibole, and (4) direct association of Zn, which normally is deposited distally at low temperature, with Cu in proximal locations and in endoskarn. These features are explained by the following model: (1) F lowers the solidus temperature of the magma, thus changing the timing, temperature, and duration of hydrothermal fluid exsolution. (2) Upon magmatic vapor saturation the F-rich hydrothermal fluids form bubbles that adhere to quartz phenocrysts and chemically corrode/tunnel into the quartz forming vermicular resorption textures. (3) F-rich hydrothermal fluids also promote the formation of endoskarn; silicic rocks are attacked by F-rich fluids in the same sense that carbonate wall rocks are dissolved by weakly to moderately acidic hydrothermal fluids. (4) Low fluid exsolution temperature facilitated by high F activity promotes high Zn/Cu ratios in proximal locations due to the solubility of Zn relative to Cu at lower temperatures. This model may be applicable at other localities such as the world-class Cu–Zn skarn Antamina mine, as well as some tin and rapakivi granites.     

High-pressure experimental growth of diamond using C–K2CO3–KCl as an analogue for Cl-bearing carbonate fluid

High-pressure, high-temperature diamond growth experiments have been conducted in the system C–K₂CO₃–KCl at 1050–1420 °C, 7.0–7.7 GPa. KCl is of interest because of the strong effect of halogens on the phase relations of carbonate-rich systems [Geophys. Res. Lett. 30 (2003) 1022] and because of the occurrence of KCl coexisting with alkali silicate–carbonate fluids in natural-coated diamond [Geochim. Cosmochim. Acta 64 (2000) 717]. We have used system C–K₂CO₃–KCl as an analogue for these mantle fluids in diamond growth experiments. The presence of KCl reduces the potassium carbonate liquidus to ≤1000 °C at 7.7 GPa, allowing it to act as a solvent catalyst for diamond growth at temperatures below the continental geotherm. This is a reduction on the minimum diamond growth temperature reported in the alkali-carbonate–C–O–H system [Lithos 60 (2002) 145]. Diamond growth using carbonate solvent catalysts is characterised by a relatively long induction period. However, the addition of KCl also reduced the period for diamond growth in carbonate to 5 min; no such induction period appears to be necessary. It is suggested that KCl destabilises carbonate, allowing greater solubility and diffusion of carbon.